NOV 17, 202647 MINS READ
The equilibrium between ferrous chloride (FeCl₂) and ferric chloride (FeCl₃) is governed by redox reactions involving chlorine, oxygen, and hydrogen chloride. The primary reaction in oxidative environments is:
2 FeCl₂(s/l) + Cl₂(g) ⇌ 2 FeCl₃(s/l/g)
In oxygen-rich atmospheres, the oxidation proceeds via:
4 FeCl₂(s) + O₂(g) ⇌ 2 FeCl₃(s) + 2 FeO(s)
However, the direct oxidation of ferric chloride to produce chlorine and iron oxide—critical for chlorine recovery—follows:
2 FeCl₃(g) + ½ O₂(g) ⇌ Cl₂(g) + Fe₂O₃(s) 6,7,8
This reaction exhibits unfavorable equilibrium at elevated temperatures (>600°C), where the equilibrium constant decreases, limiting chlorine yield 7,8. At 675°C, the equilibrium shifts toward reactants, necessitating multi-zone reactors with temperature gradients (e.g., 800°C in zone 1, 675°C in zone 2) to maximize Cl₂ recovery while preventing iron oxide scale accumulation 7. The molar ratio of FeCl₃ to O₂ significantly impacts conversion efficiency: ratios between 2:1 and 4:1 favor complete oxygen consumption, simplifying product separation 7.
In hydrochloric acid solutions, the equilibrium is further complicated by hydrolysis:
FeCl₃(aq) + 3 H₂O ⇌ Fe(OH)₃(s) + 3 HCl(aq)
At temperatures of 150–300°C, ferric chloride undergoes partial hydrolysis to form iron oxide (hematite, Fe₂O₃) and regenerate HCl 1,5,12. The extent of hydrolysis depends on free HCl concentration, temperature, and pressure: at 40–75 wt% FeCl₃ and <1 wt% free HCl, hydrolysis proceeds efficiently at 200–650°C, yielding high-purity hematite and recoverable HCl 5,12.
Key thermodynamic parameters:
The presence of iron oxide as a catalyst lowers reaction temperatures and mitigates scale formation, a persistent challenge in vapor-phase oxidation 8. Fluidized bed reactors operating at 400–650°C with granular Fe₂O₃ or siliceous sand prevent outlet blockage by scraping condensed FeCl₃ deposits 2.
The phase behavior of FeCl₃–HCl–H₂O systems is critical for designing stable, transportable ferric chloride solutions and for crystallizing non-hydrolyzable metal chlorides in hydrometallurgical processes.
At 0°C, the solubility of iron in ferric chloride solutions decreases from ~15 wt% Fe (at 0 wt% HCl) to ~11 wt% Fe (at 16 wt% HCl), then increases sharply above 16 wt% HCl, reaching >15 wt% Fe at 17 wt% HCl 16,18. This non-monotonic behavior defines a stability window: solutions with 16–23 wt% Fe and 11–17 wt% HCl remain stable (no precipitation) at 0°C for >30 days 16,18.
At −10°C, similar phase behavior is observed, with an expanded region of reversible freezing (slush formation without salt precipitation) at 15–21 wt% Fe and 12–16 wt% HCl 16,18. Reversibly frozen solutions can be thawed and reconstituted on-site by dilution with water or dilute HCl, enabling safe transportation in unheated rail cars 16,18.
Practical implications for R&D:
In concentrated FeCl₃ solutions (30–80 wt% FeCl₃, <30 wt% metal chlorides), hydrolysis at 200–650°C precipitates hematite (Fe₂O₃) while concentrating non-hydrolyzable chlorides in the filtrate 12,20. The hydrolysis reaction is driven by:
2 FeCl₃(aq) + 3 H₂O(l) → Fe₂O₃(s) + 6 HCl(g)
Operating at 400–600°C and atmospheric to 30 bar pressure, this process recovers >95% of iron as hematite and regenerates HCl for recycle 5,12. The filtrate, enriched in Li, Al, Ti, Zr, Nb, rare earths, and other non-hydrolyzable chlorides, can be further processed by crystallization or solvent extraction 12,20.
In the chloride route to TiO₂ pigment and aluminum metal, carbo-chlorination of ilmenite (FeTiO₃) or bauxite (Al₂O₃·xH₂O) at 800–1200°C produces TiCl₄ or AlCl₃ alongside FeCl₃/FeCl₂ by-products 6,8,10,17. Recovering chlorine from these by-products is economically critical.
Two-step reduction-oxidation process 8,10,17:
Reduction (dechlorination): FeCl₃ is reduced to FeCl₂ using sulfur, carbon monoxide, or chlorine polysulfides (e.g., S₂Cl₂) at 150–300°C:
2 FeCl₃(s) + S(l) → 2 FeCl₂(s) + S₂Cl₂(g) 103 FeCl₃(s) + S₅Cl₂(l) → 3 FeCl₂(s) + 2 S₂Cl₂(g) 10Oxidation: FeCl₂ is oxidized at 300–1200°C in fluidized bed reactors with O₂ or air, producing FeCl₃ and Fe₂O₃:
4 FeCl₂(s) + O₂(g) → 2 FeCl₃(g) + 2 FeO(s) 8Key process parameters:
For metal chloride solutions with >50 wt% FeCl₃ and Fe³⁺/Fe²⁺ ≥0.2, a two-stage pyrohydrolysis process recovers HCl and produces Fe₂O₃ 5:
This method handles high-throughput (>10 t/h FeCl₃) and avoids the size limitations of conventional pyrohydrolysis apparatus 5. The recovered HCl is recycled to leaching or chlorination stages, closing the chlorine loop 5,12.
Evaporative concentration of dilute FeCl₃ solutions (5–15 wt% Fe) to 23–26 wt% Fe at 150–300°C removes free HCl to <0.05 wt%, yielding stable, single-phase solutions that remain liquid at ≥8°C 3,19. These solutions are ideal for bulk transportation and on-site reconstitution:
In the chloride process, ilmenite (FeTiO₃) is carbo-chlorinated at 900–1100°C with Cl₂ and coke, producing TiCl₄ and FeCl₃/FeCl₂ 6,8. The iron chloride by-product (10–30 wt% of feed) contains 40–60 wt% Fe and trace TiCl₄, AlCl₃, MgCl₂, and CaCl₂ 6. Recovering chlorine from this by-product via the reduction-oxidation cycle (described above) reduces raw Cl₂ consumption by 30–50%, significantly lowering operating costs 8,10.
Case Study: Two-Zone Oxidation Reactor For Chlorine Recovery — Titanium Dioxide Industry
A pilot-scale reactor with two successive zones (800°C and 675°C) processed FeCl₃ vapor and O₂ at a molar ratio of 3:1 7. Coolant (coarse sand at 400°C) was injected between zones to lower the temperature by 125°C, preventing equilibrium reversal 7. Chlorine yield increased from 68% (single-zone, 800°C) to 89% (two-zone), with Fe₂O₃ purity >98% 7. Cyclone separators removed entrained coolant and oxide, and unreacted FeCl₃ was condensed and recycled 7. This configuration is now standard in several TiO₂ plants, achieving >85% Cl₂ recovery and reducing waste disposal costs 7.
Sulpho-chlorination of bauxite at 350–650°C with Cl₂ and S produces AlCl₃ and FeCl₃ 17. The FeCl₃ by-product (typically 15–25 wt% of feed) is processed by reduction with sulfur to FeCl₂ and S₂Cl₂, followed by oxidation to Fe₂O₃ and recycling of FeCl₃ 17. The S₂Cl₂ is either returned to the sulpho-chlorinator or converted to Cl₂ by thermal dissociation 17. This closed-loop system recovers >90% of chlorine values and eliminates the need for external Cl₂ supply after startup 17.
Sewage sludge ash (SSA) contains 5–20 wt% Fe, 2–10 wt% Al, and trace amounts of Ti, Zr, Nb, rare earths, and precious metals 15. Chlorination with alkali/alkaline earth chlorides (e.g., NaCl, CaCl₂) at 200–1100°C in inert atmosphere volatilizes FeCl₃ and AlCl₃, which are isolated in the off-gas stream 4,15. The FeCl₃-rich condensate is then hydrolyzed to precipitate Fe₂O₃, concentrating non-hydrolyzable chlorides (e.g., ZrCl₄, rare earth chlorides) in the filtrate for selective recovery 12,15.
Process parameters for SSA chlorination 15:
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| ASAHI GLASS CO. Ltd. | Industrial chlorination processes requiring continuous chlorine recovery from iron chloride oxidation, particularly in fluidized bed reactors for titanium dioxide and aluminum production. | Chlorine Recovery System | Prevents gas outlet blockage by contacting chlorine with cooler granular particles at 400°C, enabling continuous operation at 400-650°C with stable Cl₂ production from iron oxide chlorination. |
| Kemira Oyj | Bulk transportation and on-site reconstitution for water treatment, PCB etching, and coagulation applications requiring high-concentration stable ferric chloride solutions. | High Iron Content Ferric Chloride Solution | Achieves stable ferric chloride solutions with 23-26 wt% iron and <0.05 wt% free HCl through evaporative concentration at 150-300°C, remaining liquid at ≥8°C for >90 days without precipitation. |
| AMERICAN CYANAMID COMPANY | Chlorine recovery from iron chloride by-products in titanium dioxide pigment production via chloride route, reducing raw Cl₂ consumption by 30-50%. | Two-Zone Oxidation Reactor | Increases chlorine recovery yield from 68% to 89% using two-zone reactor configuration (800°C/675°C) with coolant injection, producing >98% purity Fe₂O₃ and minimizing equilibrium reversal. |
| MINERAL PROCESS LICENSING CORP BV | Closed-loop chlorine recovery in aluminum production from bauxite sulpho-chlorination and titanium dioxide manufacturing, eliminating external Cl₂ supply after startup. | Reduction-Oxidation Chlorine Recovery Process | Recovers >90% chlorine values through two-step process: reduction of FeCl₃ to FeCl₂ using sulfur/polysulfides at 150-300°C, followed by oxidation at 400-1200°C with recyclable S₂Cl₂ generation. |
| SMS SIEMAG PROCESS TECHNOLOGIES GMBH | Hydrometallurgical recovery of valuable metals from sewage sludge ash, bauxite, and ilmenite leaching solutions with simultaneous HCl regeneration and selective metal chloride crystallization. | Pyrohydrolysis Metal Chloride Concentration System | Precipitates >95% iron as hematite at 200-650°C while concentrating non-hydrolyzable chlorides (Li, Al, Ti, Zr, rare earths) in filtrate, regenerating >70 wt% HCl for recycle. |