NOV 17, 202652 MINS READ
Iron chloride raw materials are categorized based on their origin, iron oxidation state, and associated impurities. Primary sources include natural iron ores (Fe₂O₃, Fe₃O₄) with iron content typically ranging from 45–70 wt% 10, metallurgical residues such as roasted pyrites containing 50–65 wt% Fe (predominantly as Fe₂O₃ and FeO) 7, and titaniferous materials like ilmenite (FeTiO₃) with 20–40 wt% Fe 13,16. Recent developments have introduced synthetic iron phosphate compounds—including LiFePO₄ (LFP) and LiFe₁₋ₓMnₓPO₄ (LFMP, where 0 ≤ x < 0.9)—as emerging feedstocks for chloride production, driven by the growing volume of end-of-life battery recycling 4,5,8.
The chemical composition of these raw materials dictates chlorination selectivity and process conditions. For instance, roasted pyrites analyzed in 7 exhibit 65% of iron as Fe₃O₄ and 35% as Fe₂O₃, with silicon present as SiO₂ (8–12 wt%) and calcium as CaSO₄ (2–5 wt%). Trace metals (Cu, Zn, Pb, Co, Ag) at 0.1–2 wt% levels can be co-chlorinated and recovered as valuable by-products 1,2. Titaniferous materials present additional complexity: ilmenite contains >5 wt% Fe alongside 40–60 wt% TiO₂, necessitating selective chlorination strategies to separate iron and titanium chlorides 9,13,16.
The oxidation state of iron in raw materials profoundly affects chlorination kinetics and thermodynamics. Ferric oxide (Fe₂O₃) reacts with chlorinating agents at 300–700°C to form FeCl₃, which sublimes at 315°C (1 atm) 7. Ferrous oxide (FeO) and magnetite (Fe₃O₄) require higher temperatures (650–1000°C) and may produce FeCl₂ under reducing conditions 1,2. Pre-oxidation roasting at 700°C converts mixed-valence iron to Fe₂O₃, ensuring uniform chlorination behavior and minimizing downstream separation challenges 7.
Impurities in iron chloride raw materials influence both process efficiency and product quality. Silica (SiO₂) forms volatile SiCl₄ above 600°C, requiring condensation separation 3,15. Sulfur-bearing phases (sulfates, residual sulfides) can generate SO₂ or S₂Cl₂ during chlorination, necessitating scrubbing or recycle strategies 9,13. Alkali and alkaline earth metals (Na, K, Ca, Mg) form non-volatile chlorides that accumulate in reactor beds, requiring periodic purging 4,5. Pretreatment steps—including magnetic separation (for Fe₃O₄ concentration), acid leaching (for alkali removal), and calcination (for sulfate decomposition)—are often employed to upgrade raw material quality prior to chlorination 7,10.
A novel approach disclosed in 1,2 employs anhydrous metal chlorides (FeCl₃, MnCl₂, ZnCl₂, PbCl₂) as solid chlorinating agents for iron oxide materials at 600–900°C in suspended-state reactors. The process achieves selective chlorination of non-ferrous metals (Cu, Zn, Pb, Ag, Co) while minimizing iron chloride formation, with chloride recovery via aqueous leaching and regeneration by reacting residual HCl with elemental metals or their oxides/hydroxides/carbonates 1. Water addition is controlled to ≤ stoichiometric requirements for desired metal selectivity, avoiding the energy penalty of vaporizing excess water inherent in HCl-based methods 2. This route is particularly advantageous for complex sulfidic or oxidic concentrates where traditional gas-phase chlorination suffers from incomplete conversion or excessive chlorine consumption.
Carbo-chlorination—chlorination in the presence of carbon or CO at 800–1200°C—is the dominant industrial route for processing ilmenite and bauxite 3,9,13,15,16. The reaction proceeds as:
2 Fe₂O₃ + 6 C + 6 Cl₂ → 4 FeCl₃ + 6 CO (at 900–1100°C)
or under reducing conditions:
FeO + C + Cl₂ → FeCl₂ + CO (at 650–900°C) 10,14
Iron chloride (FeCl₂ or FeCl₃) volatilizes and is separated from TiCl₄ and AlCl₃ via fractional condensation 3,13,15. Off-gas streams contain CO/CO₂, requiring scrubbing and recycle of unreacted chlorine 9,16. Sulfo-chlorination—using sulfur or sulfur-containing reductants at 300–650°C—produces FeCl₃ and SO₂, with the latter recoverable as sulfuric acid or elemental sulfur 3,15. This route offers lower operating temperatures but introduces sulfur management complexity.
Selective iron removal from ilmenite at 800–950°C in fluidized beds using CO/Cl₂ mixtures (CO:Cl₂ molar ratio 1:1 to 2:1) yields iron-depleted TiO₂ residues with <8 wt% Fe, suitable for subsequent TiCl₄ production 10. The process requires precise control of CO stoichiometry to avoid titanium chlorination while maintaining >90% iron conversion 10.
Patents 4,5,8,12 describe a breakthrough method for producing iron chlorides from iron phosphate precursors (FePO₄, Fe₃(PO₄)₂, LiFePO₄, LiFe₁₋ₓMnₓPO₄) by reaction with alkali or alkaline earth chlorides (NaCl, KCl, CaCl₂, MgCl₂) at 200–1100°C in inert atmosphere (<200 ppm O₂). The reaction mechanism involves chloride exchange:
2 FePO₄ + 3 CaCl₂ → 2 FeCl₃ + Ca₃(PO₄)₂ (at 600–900°C) 4,5
FeCl₃ volatilizes (b.p. 315°C) and is recovered in the off-gas stream, while calcium phosphate remains as solid residue 8,12. This route is particularly relevant for recycling LFP battery cathodes, where lithium is co-extracted as LiCl (m.p. 605°C, b.p. 1382°C) for separate recovery 4,5. Optimal conditions reported include 700–850°C reaction temperature, 1.5–2.0 molar excess of chloride salt, and 2–4 hour residence time, achieving >95% iron conversion and >90% FeCl₃ purity 5,12.
The process disclosed in 14 utilizes HCl as the sole chlorinating agent in the presence of carbon at 650–1250°C, producing FeCl₂/FeCl₃, elemental H₂, and CO/CO₂:
Fe₂O₃ + 6 HCl + 3 C → 2 FeCl₃ + 3 H₂ + 3 CO (at 1000–1200°C) 14
The carbon prevents water formation, enabling hydrogen recovery as a valuable co-product. Selective iron chlorination from ilmenite occurs at 650–1100°C, leaving TiO₂-rich residue, while complete chlorination (including titanium) requires ≥1250°C 14. This route offers advantages in hydrogen economy applications but demands rigorous HCl recycle infrastructure.
Chlorine recovery from iron chloride by-products is critical for process economics. The reduction-oxidation cycle described in 9,13,16 involves:
2 FeCl₃ + S → 2 FeCl₂ + S₂Cl₂ (at 200–400°C) 94 FeCl₂ + O₂ → 2 FeCl₃ + 2 FeO (at 300–600°C) 13Alternative reductants include CO, CS₂, and polysulfides (SₓCl₂, x >1) 9,16. The oxidation step at 300–1200°C produces Fe₂O₃ and regenerates FeCl₃, with chlorine values captured as S₂Cl₂ or Cl₂ depending on reductant choice 13,16. This closed-loop approach achieves >85% chlorine utilization efficiency in industrial ilmenite processing 13.
Chlorination temperature governs reaction rate, selectivity, and product distribution. Low-temperature regimes (200–600°C) favor solid-state chloride exchange (e.g., FePO₄ + alkali chlorides) with minimal volatilization of impurities 4,5. Medium-temperature regimes (600–900°C) enable selective iron chlorination from mixed oxides while retaining refractory oxides (TiO₂, Al₂O₃) in solid phase 1,2,10. High-temperature regimes (900–1250°C) achieve complete chlorination of all metal oxides, suitable for integrated TiCl₄/FeCl₃ production from ilmenite 14. Activation energies for Fe₂O₃ chlorination with Cl₂/CO range from 80–120 kJ/mol (650–850°C), with reaction rates increasing 3–5× per 100°C temperature rise 10.
The choice of chlorinating agent—Cl₂, HCl, metal chlorides, or mixed Cl₂/CO—determines energy input, product purity, and by-product streams. Gaseous Cl₂ offers rapid kinetics but requires excess (10–30% over stoichiometric) to drive reactions to completion, generating HCl or Cl₂ in off-gas 3,15. HCl with carbon produces H₂ co-product but necessitates higher temperatures (≥1000°C) for acceptable rates 14. Solid metal chlorides (FeCl₃, ZnCl₂) enable lower-temperature operation (300–700°C) with controlled water addition for selectivity tuning 1,2. Cl₂/CO mixtures at 1:1 to 2:1 molar ratio provide selective iron chlorination at 800–950°C, with CO acting as both reductant and diluent 10.
Fluidized bed reactors dominate industrial iron chloride production due to excellent heat/mass transfer and continuous solids handling 1,10,13. Key design parameters include superficial gas velocity (0.3–1.5 m/s), bed temperature uniformity (±10°C), and particle size distribution (50–500 μm) to maintain stable fluidization 10. Suspended-state reactors (entrained flow) operate at higher gas velocities (3–10 m/s) with finer particles (<50 μm), achieving shorter residence times (1–10 s) but requiring efficient cyclone separation 1,2. Rotary kilns are employed for large-scale roasting/chlorination of pyrites and ilmenite, offering residence times of 1–4 hours and throughput up to 50 t/h 7.
Volatile chlorides (SiCl₄, TiCl₄, AlCl₃) are separated from FeCl₃ via fractional condensation: SiCl₄ (b.p. 57°C) and TiCl₄ (b.p. 136°C) condense first, followed by AlCl₃ (sublimes 180°C) and FeCl₃ (sublimes 315°C) 3,15. Reflux distillation at 3–4 atm separates AlFeCl₆ complexes, yielding AlCl₃ overhead and FeCl₃ bottoms with >98% purity 3,15. Non-volatile chlorides (CaCl₂, MgCl₂, alkali chlorides) accumulate in reactor beds and are removed via periodic bed replacement or aqueous leaching of purged solids 4,5. Trace metal chlorides (CuCl₂, ZnCl₂, PbCl₂) are recovered by selective condensation (CuCl₂ at 400°C, ZnCl₂ at 330°C) or aqueous extraction followed by cementation/electrowinning 1,2,7.
Iron chloride raw materials serve as feedstocks for chlorination-based metal extraction from complex ores and concentrates. The process described in 1,2 recovers Cu, Zn, Pb, Ag, and Co from sulfidic/oxidic materials by selective chlorination at 600–900°C, with metal chlorides leached and separated by solvent extraction or crystallization. Typical recoveries exceed 90% for Cu and Zn, 85% for Pb, and 80% for Ag 1. This route is economically attractive for low-grade polymetallic ores (e.g., <1% Cu, <3% Zn) where conventional smelting is unviable.
Titanium dioxide pigment production via the chloride route consumes 1.2–1.5 t of ilmenite per ton of TiO₂, generating 0.4–0.6 t of iron chloride by-product 13,16. Chlorine recovery from this by-product via the reduction-oxidation cycle 9,13,16 reduces net chlorine consumption by 30–40%, significantly improving process economics
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| BOLIDEN AB | Metallurgical refining of complex sulfidic/oxidic concentrates and low-grade polymetallic ores where traditional gas-phase chlorination suffers from incomplete conversion. | VIP Chlorination Process | Selective chlorination of non-ferrous metals (Cu, Zn, Pb, Ag, Co) from iron oxide materials at 600-900°C using anhydrous metal chlorides, achieving >90% recovery with controlled water addition for metal selectivity and chloride recycling. |
| MINERAL PROCESS LICENSING CORP. B.V. | Titanium dioxide pigment production via chloride route, processing 1.2-1.5 tons ilmenite per ton TiO2 with iron chloride by-product management. | Ilmenite Carbo-Chlorination System | Recovery of chlorine values from iron chloride by-product via reduction-oxidation cycle (FeCl3 reduction with sulfur at 200-400°C, FeCl2 oxidation at 300-600°C), achieving >85% chlorine utilization efficiency and 30-40% reduction in net chlorine consumption. |
| LANXESS Deutschland GmbH | End-of-life lithium iron phosphate (LFP) and lithium iron manganese phosphate (LFMP) battery recycling for recovery of iron chlorides and lithium values. | LFP Battery Recycling Process | Production of iron chlorides from lithium iron phosphate battery cathodes by reaction with alkali/alkaline earth chlorides at 700-850°C in inert atmosphere, achieving >95% iron conversion and >90% FeCl3 purity with co-extraction of lithium as LiCl. |
| BLUCHER GMBH | Metallurgical processing of sulfuric acid manufacturing by-products and recovery of metallic iron and valuable trace metals from pyrite tailings. | Roasted Pyrites Processing System | Oxidative roasting of pyrite tailings at 700°C followed by chlorination with ammonium chloride at 300°C, converting 65% Fe3O4 and 35% Fe2O3 to FeCl3 with selective sublimation at 350°C and recovery of trace metals (Cu, Zn, Pb, Co, Ag). |
| COLUMBIA-SOUTHERN CHEMICAL CORPORATION | Selective iron chlorination from ilmenite for titanium dioxide production and hydrogen economy applications requiring co-production of elemental hydrogen. | HCl-Carbon Chlorination Technology | Chlorination of iron/titanium oxides using HCl as sole chlorinating agent with carbon at 650-1250°C, producing FeCl2/FeCl3, elemental hydrogen, and CO/CO2, enabling selective iron removal at 650-1100°C or complete chlorination at ≥1250°C. |