NOV 17, 202661 MINS READ
Isopropyl palmitate (CAS 142-91-6) is a branched-chain ester with the molecular formula C₁₉H₃₈O₂ and a molecular weight of approximately 298.5 g/mol. Its structure comprises a 16-carbon saturated fatty acid (palmitic acid) esterified with isopropyl alcohol, yielding a moderately lipophilic, low-polarity liquid at ambient temperature 11. Key physicochemical properties include:
The relatively high flash point of isopropyl palmitate is attributed to its low vapor pressure at ambient temperature and the absence of highly volatile functional groups. The branched isopropyl moiety introduces steric hindrance that slightly elevates boiling point and reduces volatility compared to linear alkyl esters of similar molecular weight 9,14.
Flash point is defined as the lowest temperature at which a liquid's vapor can form an ignitable mixture with air in the presence of an ignition source. For isopropyl palmitate, standardized test methods include:
This is the most widely cited method for determining the flash point of isopropyl palmitate and similar esters 9,14. The closed-cup configuration minimizes vapor loss and provides reproducible results for liquids with flash points above 40°C. Typical procedure involves:
For isopropyl palmitate, the ASTM D-93 flash point is consistently reported in the range of 125–160°C 9,14, with variations depending on purity, presence of residual isopropanol from synthesis, and moisture content.
An alternative rapid equilibrium method suitable for screening and quality control. This method has been applied to evaluate flash point suppression in blends containing isopropyl chloride and hydrofluorocarbons 5,7, demonstrating its utility for multi-component systems. While not the primary standard for pure isopropyl palmitate, ASTM D-3828 can be used for formulations containing this ester alongside volatile co-solvents.
Industrial formulations often blend isopropyl palmitate with other solvents or functional additives. Understanding how these components interact to influence overall flash point is critical for safety and regulatory compliance.
Recent studies on ester-based lubricants and heat transfer fluids demonstrate that blending fully esterified esters (such as isopropyl palmitate or 2-ethylhexyl palmitate) with partially esterified polyol esters (e.g., trimethylolpropane pelargonate, 66.7% esterified; neopentyl glycol sesquipelargonate, 50% esterified) can yield unexpected flash point elevation while maintaining or even reducing viscosity 9,14. Specifically:
For isopropyl palmitate formulations, incorporating 10–20 wt% of a partially esterified polyol ester can elevate flash point from ~135°C to >150°C, enhancing safety margins for high-temperature processing (e.g., hot-fill cosmetic emulsions, thermal fluid applications) 14,15.
Conversely, when isopropyl palmitate is blended with highly volatile solvents (e.g., isopropanol, acetone, or hydrocarbons), the overall flash point is dominated by the most volatile component. Patent literature on isopropanol-based cleaning solutions illustrates this principle:
Partially fluorinated hydrocarbons and ethers (e.g., 2,2,2-trifluoroethyl 1,1,2,2-tetrafluoroethyl ether, 3,4-dihydroperfluoro-2-methylpentane) have been shown to elevate flash points in isopropanol/water mixtures by >15°C at 10–20 wt% loading 1,3. While these additives are not commonly used in isopropyl palmitate formulations due to cost and regulatory constraints, they represent a potential strategy for specialized applications (e.g., aerospace hydraulic fluids, fire-resistant heat transfer media) where both low viscosity and high flash point are required 6.
Isopropyl palmitate, with a flash point of 125–160°C, is classified as a Combustible Liquid, Category 4 under the Globally Harmonized System (GHS) and is not classified as a flammable liquid (which requires flash point <60°C). This classification has significant implications:
Although isopropyl palmitate is not classified as flammable, it can support combustion at elevated temperatures:
Recommended Fire Suppression: Dry chemical, CO₂, or foam extinguishers are effective. Water spray may be used for cooling but is ineffective for extinguishing ester fires due to immiscibility.
Isopropyl palmitate exhibits good thermal stability up to ~150°C under inert atmosphere, but prolonged heating in air accelerates autoxidation:
Isopropyl palmitate is extensively used as an emollient, spreading agent, and viscosity regulator in creams, lotions, and makeup products 11. Its flash point of 125–160°C ensures safe processing during:
Case Study: Viscosity Regulation Without Thickeners — Patent DE102012203652 11 describes the use of isopropyl palmitate at 5–15 wt% in oil-in-water emulsions to achieve target viscosity (2000–8000 cP) without synthetic thickeners. The high flash point of isopropyl palmitate permits safe processing at 75–80°C, and the resulting emulsions exhibit stable rheology over 6 months at 40°C storage.
In transdermal patches, ointments, and topical suspensions, isopropyl palmitate serves as a penetration enhancer and lipophilic vehicle. Flash point considerations include:
Although less common than in cosmetics, isopropyl palmitate and structurally similar esters (e.g., 2-ethylhexyl palmitate) are explored as low-viscosity, biodegradable base stocks for specialty lubricants and heat transfer fluids 9,14,15. Key performance attributes include:
Case Study: Hydraulic Fluid Formulation — Patent CA2586417 6 discloses fire-resistant aircraft hydraulic fluids comprising 60–70 wt% tributyl phosphate ester, 10 wt% triisobutyl phosphate ester, and 10 wt% diisopropyl naphthalene, with a flash point >160°C and autoignition temperature >400°C. While isopropyl palmitate is not a component, the formulation strategy—blending high-flash-point esters with aromatic compounds—is directly applicable to isopropyl palmitate-based systems targeting similar performance.
Isopropyl palmitate is occasionally used as a lipophilic co-solvent in precision cleaning formulations for electronics and optics. However, its low volatility limits utility in applications requiring rapid evaporation. Patent literature on isopropanol-based cleaning solutions 1,3,4 demonstrates that:
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| HOECHST AKTIENGESELLSCHAFT | Precision cleaning applications for electronics and optics manufacturing where both high solvency and elevated flash point (>50°C) are required for workplace safety and regulatory compliance. | Isopropanol-Based Precision Cleaning Solution | Achieved flash point elevation from 39°C to above 50°C by blending isopropanol with perfluoro-4-methyl-2-pentene (5.3 wt%), enabling safer handling and compliance with industrial safety standards while maintaining effective cleaning performance. |
| ExxonMobil Research and Engineering Company | Automotive and industrial lubricants, biodegradable hydraulic fluids, and heat transfer media requiring enhanced thermal safety margins, low volatility, and reduced viscosity for high-temperature processing environments. | Low-Viscosity Ester-Based Lubricant Formulations | Blending fully esterified esters (e.g., 2-ethylhexyl palmitate) with partially esterified polyol esters (66.7% esterified trimethylolpropane pelargonate) at 60:40 to 80:20 ratios achieved flash point elevation of 10-15°C above predicted values (125-160°C range) while maintaining kinematic viscosity below 5 cSt at 100°C, as determined by ASTM D-93 and D-445. |
| VULCAN CHEMICALS | Polyisocyanurate and polyurethane foam manufacturing where non-flammable blowing agents are mandated for fire safety, particularly in construction insulation and refrigeration applications. | Non-Flammable Foam Blowing Agent Systems | Suppression of isopropyl chloride flash point (normally -32°C) to non-detectable levels by blending with 10-20 wt% hydrofluorocarbons (HFC-245fa), as verified by ASTM D-3828 SetaFlash method, enabling safe handling and transportation of volatile chlorinated compounds. |
| SOLUTIA INC. | Commercial and military aircraft hydraulic systems operating at elevated temperatures where fire-resistant functional fluids with high flash point and thermal stability are critical for safety. | Fire-Resistant Aircraft Hydraulic Fluids | Formulation comprising 60-70 wt% tributyl phosphate ester, 10 wt% triisobutyl phosphate ester, and 10 wt% diisopropyl naphthalene achieved flash point exceeding 160°C, fire point above 177°C, and autoignition temperature above 400°C, meeting stringent aerospace fire-resistance requirements. |
| BEIERSDORF AG | Cosmetic creams, lotions, and dermatological preparations requiring controlled rheology, emollient properties, and safe hot-emulsification processing without fire hazards during manufacturing. | Isopropyl Palmitate Emulsion-Based Cosmetic Formulations | Utilization of isopropyl palmitate at 5-15 wt% as a viscosity-regulating lipid achieved target viscosity (2000-8000 cP) in oil-in-water emulsions without synthetic thickeners, with safe processing at 75-80°C well below the flash point of 125-160°C (ASTM D-93). |