Unlock AI-driven, actionable R&D insights for your next breakthrough.

Sodium Chloride Formula: Molecular Structure, Crystal Forms, And Industrial Applications

SEP 16, 202652 MINS READ

Want An AI Powered Material Expert?
Here's Patsnap Eureka Materials!
Sodium chloride formula, represented as NaCl, defines one of the most fundamental ionic compounds in chemistry and industry. With a 1:1 stoichiometric ratio of sodium cations (Na⁺) and chloride anions (Cl⁻), this binary salt exhibits a face-centered cubic (rock salt) crystal structure under standard conditions, though novel polymorphic and co-crystalline forms have been synthesized for specialized applications 2,3. Understanding the molecular formula, structural variations, and physicochemical behavior of sodium chloride is essential for R&D professionals developing advanced materials in electrochemistry, food science, pharmaceuticals, and desalination technologies.
Want to know more material grades? Try Patsnap Eureka Material.

Molecular Formula And Stoichiometry Of Sodium Chloride

The chemical formula of sodium chloride is NaCl, indicating a 1:1 molar ratio between sodium and chlorine atoms 2,3. In the solid state, each Na⁺ ion is octahedrally coordinated by six Cl⁻ ions, and vice versa, forming a three-dimensional ionic lattice with a rock salt (halite) structure 2,3. The molar mass of NaCl is approximately 58.44 g/mol (Na: 22.99 g/mol; Cl: 35.45 g/mol), and the compound is highly soluble in water (approximately 360 g/L at 25 °C) due to strong ion-dipole interactions with polar water molecules 2,3.

Key stoichiometric and thermodynamic parameters include:

  • Melting point: 801 °C (1074 K) at atmospheric pressure 16
  • Density: 2.16 g/cm³ (crystalline solid, 25 °C) 2
  • Lattice energy: approximately 786 kJ/mol, reflecting the strong electrostatic attraction between Na⁺ and Cl⁻ ions 2,3
  • Standard enthalpy of formation: −411.2 kJ/mol (aqueous NaCl) 2

These properties underpin NaCl's role as a model ionic compound in physical chemistry and materials science curricula, as well as its ubiquity in industrial processes 2,3,16.

Crystal Structures And Polymorphic Forms Of Sodium Chloride

Conventional Rock Salt Structure

Under ambient conditions, sodium chloride crystallizes in the cubic Fm3̅m space group (rock salt structure), with a lattice parameter a ≈ 5.64 Å 2,3. This structure is characterized by interpenetrating face-centered cubic sublattices of Na⁺ and Cl⁻ ions, resulting in six-fold coordination for each ion 2. The {100} cleavage planes are energetically favorable, leading to the formation of cubic or cubic-hexahedral (tetradecahedral) crystals during slow evaporation of brine 2,3.

Novel Flat Tetrahedronal Crystal Form

Research has demonstrated that sodium chloride can adopt a flat tetrahedronal crystal morphology when crystallized from aqueous solutions containing iron chloride (FeCl₃ or FeCl₂) as a habit modifier 2,3. This novel form, first reported by Nakane and co-workers, exhibits:

  • A flattened tetrahedral geometry with four triangular faces meeting at acute angles 2,3
  • Enhanced surface area relative to conventional cubes, potentially improving dissolution kinetics 2,3
  • Stability in aqueous media containing 0.01–0.5 wt% FeCl₃, with crystallization occurring at 40–60 °C under controlled evaporation 2,3

The flat tetrahedronal form is proposed to arise from selective adsorption of Fe³⁺ or Fe²⁺ ions onto specific crystal faces, altering the relative growth rates of {111} versus {100} planes 2,3. X-ray diffraction (XRD) analysis confirms retention of the underlying rock salt lattice, with morphological changes driven by kinetic rather than thermodynamic factors 2,3.

Three-Dimensional Dendritic Crystals

Addition of crystal habit modifiers such as potassium ferrocyanide (K₄[Fe(CN)₆]), polyvinyl alcohol (PVA), or sodium alginate to evaporating brine yields three-dimensional dendritic NaCl crystals with bulk densities as low as 0.50–0.60 g/mL 6,8,15. These dendrites feature:

  • Rectilinear columnar branches of rectangular (often square) cross-section, attached perpendicularly to the {100} faces of a central cubic core 8,15
  • Branch dimensions ranging from 10–100 μm in width and 50–500 μm in length, depending on evaporation rate and modifier concentration 8,15
  • Rapid dissolution in water due to high surface-area-to-volume ratios, making them suitable for instant seasoning and pharmaceutical applications 6,8

The mechanism involves preferential adsorption of ferrocyanide anions ([Fe(CN)₆]⁴⁻) or polymer chains onto {100} faces, inhibiting lateral growth and promoting unidirectional extension along <100> directions 8,15. Optimal modifier concentrations are 1–100 ppm for PVA (molecular weight 13,000–23,000 Da, viscosity 1.1–1.6 cSt for 1 wt% aqueous solution at 20 °C) and 5–50 ppm sodium alginate combined with 250–500 ppm Ca²⁺ ions 8,15.

Carbohydrate–Sodium Chloride Co-Crystals

Recent work has identified co-crystalline phases formed between sodium chloride and carbohydrates such as glucose, sucrose, or ribose 13,14. For example:

  • α-D-Glucose·NaCl·H₂O (2:1:1): Two glucose molecules and one NaCl unit co-crystallize with one water molecule, exhibiting two distinct polymorphs characterized by powder XRD 13,14
  • Sucrose·NaCl·2H₂O: A well-defined co-crystal prepared by slow evaporation of equimolar sucrose–NaCl aqueous solutions at 20–30 °C, with a melting point depressed to ~60 °C relative to pure NaCl 13,14
  • Ribose·NaCl complexes: Structural studies reveal hydrogen-bonding networks between ribose hydroxyl groups and chloride anions, stabilizing the co-crystal lattice 13,14

These co-crystals demonstrate accelerated dissolution kinetics compared to physical mixtures of the components, with complete dissolution in water achieved within 10–30 seconds versus 60–120 seconds for dry-blended powders 13,14. The enhanced dissolution is attributed to disruption of the NaCl lattice by intercalated carbohydrate molecules, reducing the activation energy for solvation 13,14. Applications include:

  • Oral rehydration salts (ORS): Co-crystals of glucose·NaCl enable rapid electrolyte replenishment without grittiness or lump formation 13,14
  • Reduced-sodium food products: Carbohydrate co-crystallization allows uniform distribution of NaCl at lower concentrations, maintaining perceived saltiness while cutting sodium intake by 20–40% 13,14
  • Pharmaceutical excipients: Sucrose·NaCl co-crystals serve as fast-dissolving carriers for active ingredients in effervescent tablets 13,14

Preparation typically involves dissolving NaCl and the carbohydrate in water at a 1:2 to 1:4 molar ratio, heating to 50–70 °C to ensure complete dissolution, then cooling to 4–10 °C over 12–24 hours to induce co-crystallization 13,14. Yields range from 60% to 85%, with purity confirmed by differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR) 13,14.

Synthesis And Crystallization Methods For Sodium Chloride

Industrial Production From Brine

The majority of commercial sodium chloride is obtained by solar evaporation of seawater or solution mining of underground salt deposits 17. In solar salt production:

  1. Seawater (3.5 wt% NaCl, 0.13 wt% MgCl₂, 0.24 wt% MgSO₄, 0.04 wt% CaCl₂) is pumped into shallow evaporation ponds 17
  2. Evaporation proceeds over 6–18 months, with gypsum (CaSO₄·2H₂O) precipitating first when the solution reaches ~3.5× concentration 17
  3. Sodium chloride crystallizes when the brine reaches ~10× concentration (≈26 wt% NaCl), forming cubic crystals 0.5–5 mm in size 17
  4. Harvested salt is washed with saturated NaCl brine to remove residual MgCl₂ and dried to <0.5 wt% moisture 17

For higher-purity applications, vacuum evaporation or mechanical vapor recompression (MVR) is employed, achieving NaCl purities >99.8 wt% with <0.01 wt% Ca²⁺ and <0.005 wt% Mg²⁺ 17. A representative MVR process operates at 60–80 °C and 0.2–0.4 bar, with energy consumption of 25–35 kWh per ton of salt produced 17.

Nanofiltration-Assisted Purification

A novel route for producing high-purity sodium chloride from seawater integrates nanofiltration (NF) pretreatment with thermal desalination 17. The process comprises:

  1. Pretreatment: Seawater is filtered through 0.1 μm cartridges and dosed with antiscalant (e.g., polyacrylic acid, 2–5 ppm) to prevent membrane fouling 17
  2. Nanofiltration: A spiral-wound NF membrane (molecular weight cut-off 200–400 Da) operated at 10–15 bar rejects 85–95% of Ca²⁺, Mg²⁺, and SO₄²⁻ ions while allowing 40–60% passage of Na⁺ and Cl⁻ 17
  3. Thermal concentration: The NF permeate (1.8–2.5 wt% NaCl, <0.01 wt% Ca²⁺) is fed to a multi-effect distillation (MED) or multi-stage flash (MSF) unit, concentrating the brine to 20–25 wt% NaCl 17
  4. Crystallization: The concentrated brine is cooled to 10–20 °C in a forced-circulation crystallizer, precipitating NaCl crystals with purity >99.5 wt% 17
  5. Dewatering: Crystals are separated by centrifugation (1500–2000 rpm, 2–5 minutes) and rinsed with distilled water to remove surface impurities 17

This approach yields sodium chloride suitable for chlor-alkali electrolysis without secondary brine treatment, reducing Ca²⁺ and Mg²⁺ to <5 ppm and <1 ppm, respectively 17. The distilled water co-product meets WHO potable water standards (total dissolved solids <10 ppm) 17.

Controlled Crystallization For Specialty Morphologies

To synthesize dendritic or columnar NaCl crystals, the following protocol is recommended 6,8,15:

  1. Prepare a saturated NaCl solution (26.4 wt% at 20 °C) and add the habit modifier:
    • For dendrites: 10–50 ppm K₄[Fe(CN)₆] or 1–10 ppm PVA (MW 14,000 Da) 6,8
    • For columnar crystals: 20–100 ppm PVA (MW 20,000 Da) combined with 10–30 ppm sodium alginate and 300–500 ppm Ca²⁺ 8,15
  2. Heat the solution to 40–50 °C and transfer to a jacketed crystallizer maintained at 25 ± 1 °C 6,8
  3. Evaporate water at 80 ± 5 mmHg (10.7 ± 0.7 kPa) using a rotary evaporator, with a surface evaporation rate of 0.5–1.5 g H₂O per cm² per hour 6,8
  4. Minimize mechanical agitation (≤50 rpm) to prevent crystal breakage; most crystallization occurs at the air–brine interface 6,8
  5. Harvest crystals when bulk density reaches 0.50–0.60 g/mL (dendritic) or 0.70–0.85 g/mL (columnar), typically after 4–8 hours 6,8,15
  6. Rinse with anhydrous ethanol and dry at 60 °C for 2 hours to remove residual water 6,8

Characterization by scanning electron microscopy (SEM) confirms branch dimensions and attachment geometry, while XRD verifies retention of the rock salt structure 6,8,15.

Physicochemical Properties And Analytical Characterization Of Sodium Chloride

Solubility And Phase Behavior

Sodium chloride exhibits retrograde solubility in water, with solubility decreasing slightly from 39.12 g/100 mL at 100 °C to 35.92 g/100 mL at 0 °C 2,3. This unusual behavior arises from the endothermic dissolution enthalpy (+3.88 kJ/mol) being offset by a large positive entropy change (+43.4 J/mol·K), making dissolution spontaneous at all temperatures but less favorable at higher temperatures 2,3. In mixed solvents, solubility drops sharply: NaCl solubility in 50 vol% ethanol–water is ~1 g/100 mL at 25 °C, enabling salting-out purification of organic compounds 2.

The eutectic point of the NaCl–H₂O system occurs at −21.1 °C and 23.3 wt% NaCl, below which ice and NaCl·2H₂O dihydrate co-precipitate 2,3. This property underpins the use of NaCl as a de-icing agent, though environmental concerns (corrosion, soil salinization) have spurred research into alternatives such as calcium magnesium acetate 2.

Electrical Conductivity And Ionic Mobility

Aqueous NaCl solutions are excellent electrolytes, with molar conductivity (Λₘ) at infinite dilution equal to 126.5 S·cm²/mol at 25 °C 2,3. Conductivity increases linearly with concentration up to ~1 M, then deviates due to ion pairing and activity coefficient effects 2. In molten NaCl (>801 °C), conductivity reaches 3–4 S/cm, enabling applications in high-temperature electrochemistry such as:

  • Molten salt electrolysis for chlorine and sodium metal production, operating at 600–700 °C in eutectic NaCl–CaCl₂ melts to lower the melting point and reduce energy consumption to 3.5–4.0 kWh per kg Cl₂ 16
  • Sodium–metal chloride batteries (e.g., ZEBRA cells), where molten NaCl at 270–350 °C serves as the electrolyte, achieving energy densities of 100–120 Wh/kg and cycle lives >2500 cycles 4,5

Thermal Stability And Decomposition

Sodium chloride is thermally stable up to its melting point (801 °C), with negligible vapor pressure (<10⁻⁶ bar) below 800 °C 16. Thermogravimetric analysis (TGA) shows no mass loss up to 850 °C in inert atmospheres (N₂ or Ar), confirming the absence of volatile impurities in high-purity samples 2,16. Above 1400 °C, NaCl begins to vapor

OrgApplication ScenariosProduct/ProjectTechnical Outcomes
TECNO-BIO CO. LTD.Food seasoning applications requiring rapid dissolution, pharmaceutical formulations, and specialty salt products where enhanced solubility and unique crystal morphology are desired.Flat Tetrahedronal Sodium Chloride CrystalsNovel flat tetrahedronal crystal morphology with enhanced surface area, produced by controlled crystallization with iron chloride (FeCl₃/FeCl₂) at 40-60°C, improving dissolution kinetics compared to conventional cubic crystals.
Nestec S.A.Oral rehydration salts (ORS) for rapid electrolyte replenishment, reduced-sodium food products, and fast-dissolving pharmaceutical excipients in effervescent tablets.Carbohydrate-Sodium Chloride Co-CrystalsCo-crystalline forms (glucose·NaCl·H₂O, sucrose·NaCl·2H₂O) achieve complete dissolution in 10-30 seconds versus 60-120 seconds for physical mixtures, enabling 20-40% sodium reduction while maintaining perceived saltiness.
KOREA ELECTRONICS TECHNOLOGY INSTITUTEEnergy storage systems requiring room-temperature operation, portable electronics, and applications where molten salt batteries (operating at 270-350°C) are impractical due to thermal management constraints.Sodium-Metal Chloride Secondary BatteryRoom-temperature operation using NaAlCl₄-SO₂ electrolyte with metal chloride cathode (CuCl₂), achieving reversible charge-discharge cycles through NaCl generation/decomposition with stable electrochemical performance.
IMPERIAL CHEMICAL INDUSTRIES LIMITEDInstant seasoning products, fast-dissolving food additives, and pharmaceutical applications requiring high surface-area-to-volume ratios for accelerated dissolution in aqueous media.Three-Dimensional Dendritic Salt CrystalsDendritic NaCl crystals with bulk density 0.50-0.60 g/mL produced using habit modifiers (K₄[Fe(CN)₆], PVA 1-100 ppm), featuring rectilinear columnar branches (10-100 μm width) for rapid dissolution.
THOMAS ALTMANN, ANTHONY ATTENBOROUGH, CONOR KENNYChlor-alkali electrolysis feedstock requiring ultra-high purity, chemical manufacturing, and industrial applications where calcium and magnesium impurities must be minimized to prevent membrane fouling and equipment scaling.High-Purity Sodium Chloride from SeawaterNanofiltration pretreatment (85-95% rejection of Ca²⁺, Mg²⁺, SO₄²⁻) integrated with thermal desalination yields >99.5 wt% NaCl purity with <5 ppm Ca²⁺ and <1 ppm Mg²⁺, eliminating secondary brine treatment.
Reference
  • Chlorine derivative useful in photodynamic therapy and diagnosis
    PatentInactiveES2791004T3
    View detail
  • Sodium chloride in novel crystal form and aqueous solution containing the same
    PatentInactiveCA1321463C
    View detail
  • Sodium chloride in tetrahedronal crystal form and aqueous solution containing the same
    PatentInactiveEP0353845A1
    View detail
If you want to get more related content, you can try Eureka.

Discover Patsnap Eureka Materials: AI Agents Built for Materials Research & Innovation

From alloy design and polymer analysis to structure search and synthesis pathways, Patsnap Eureka Materials empowers you to explore, model, and validate material technologies faster than ever—powered by real-time data, expert-level insights, and patent-backed intelligence.

Discover Patsnap Eureka today and turn complex materials research into clear, data-driven innovation!

Group 1912057372 (1).pngFrame 1912060467.png