NOV 17, 202665 MINS READ
The conventional industrial process for terephthalic acid synthesis relies on liquid-phase oxidation of p-xylene using molecular oxygen or air as the oxidant in acetic acid solvent 123. The catalyst system comprises cobalt and manganese salts (typically acetates) combined with a bromine promoter 516. Cobalt compounds serve as the primary oxidation catalyst, while manganese enhances the oxidation of intermediate species, and bromine functions as a radical initiator to accelerate the reaction 25.
Typical catalyst concentrations range from 0.02% to 2.5% by weight relative to the total reaction mass 713. The Co/Mn molar ratio is generally maintained between 1:1 and 3:1, with bromine-to-metal ratios kept as low as possible to minimize equipment corrosion while maintaining catalytic activity 25. Operating conditions include temperatures of 120–275°C and pressures of 10–60 bar 1316. Under these conditions, p-xylene undergoes sequential oxidation through intermediates including p-tolualdehyde (TALD), p-toluic acid, and 4-carboxybenzaldehyde (4-CBA) before forming terephthalic acid 17.
The primary challenge with conventional Co/Mn/Br systems is the formation of significant impurities. Crude terephthalic acid typically contains up to 9000 ppm of 4-CBA, along with p-toluic acid, benzoic acid, trimellitic acid, and colored bodies such as fluorenone derivatives 1314. These impurities render the product unsuitable for direct polymerization, necessitating subsequent purification steps 13.
Recent innovations have focused on improving catalyst selectivity and reducing impurity formation through coordination chemistry approaches 25. A novel catalyst system comprises manganese and cobalt salts complexed with multidentate ligands—specifically tridentate, tetradentate, pentadentate, or hexadentate ligands 25. These ligands coordinate with the metal centers to form stable complexes that enhance catalytic activity while suppressing side reactions.
The multidentate ligand approach addresses two critical limitations of traditional systems: (1) limited coordination of metal ions, which reduces catalyst effectiveness, and (2) excessive side reactions leading to impurity accumulation 25. By providing multiple coordination sites, multidentate ligands stabilize the active metal species in optimal oxidation states, thereby improving selectivity toward terephthalic acid formation and reducing 4-CBA and colored impurity generation 25.
Experimental data indicate that catalyst systems employing tetradentate or pentadentate ligands can reduce 4-CBA content in crude TA to below 2000 ppm, compared to 9000 ppm with conventional systems 713. This improvement translates to reduced downstream purification requirements and lower overall production costs.
Another innovative approach involves incorporating ionic liquids into the oxidation catalyst system 71317. The composition comprises p-toluic acid (0.05–4 wt%), catalyst (0.02–2.5 wt%), ionic liquid (0.04–50 wt%), carboxylic acid solvent (typically acetic acid), and p-xylene 71317. Suitable ionic liquids include imidazolium, pyridinium, pyrrolidinium, phosphonium, and ammonium-based compounds with anions such as chloride, bromide, acetate, or methanesulfonate 717.
Ionic liquids serve multiple functions: they enhance the solubility of reaction intermediates (particularly 4-CBA), thereby preventing co-crystallization with the product; they stabilize the catalyst species; and they facilitate more complete oxidation of intermediates to terephthalic acid 71317. Processes employing ionic liquids have demonstrated 4-CBA levels below 2000 ppm in the crude product, with some formulations achieving less than 100 ppm when combined with optimized reaction conditions 713.
The catalyst component in ionic liquid systems can include cobalt acetate, manganese acetate, cerium acetate, potassium acetate, cesium acetate, zirconium acetate, or copper acetate, as well as corresponding oxalates 713. The addition of cerium has been shown to facilitate lower bromine-to-metal ratios, reducing corrosion issues while maintaining high catalytic activity 25.
Historical and exploratory studies have investigated alternative oxidation catalysts beyond the Co/Mn/Br system 1618. Metal oxides and salts of chromium, nickel, iron, copper, manganese, lead, and barium have been evaluated for p-xylene oxidation 16. Chromium naphthenate and nickel naphthenate, used individually or in combination with cobalt, have shown activity in converting p-xylene to terephthalic acid, though typically with lower selectivity than optimized Co/Mn systems 16.
Processes employing manganese compounds combined with either cobalt or barium (or both) for oxidizing para-diisopropylbenzene to terephthalic acid have also been documented 18. These systems operate in organic acid media (acetic, propionic, or butyric acid) at elevated temperatures and pressures, with continuous catalyst addition to maintain activity 18. While these alternative catalysts offer reduced corrosivity compared to bromine-containing systems, they generally require more stringent conditions or longer reaction times to achieve comparable conversions.
Hydrorefining of crude terephthalic acid to produce purified TA (PTA) suitable for polyester synthesis is accomplished by catalytic hydrogenation, which converts 4-CBA and other impurities to more soluble, separable compounds 134. The most widely used catalysts are palladium supported on activated carbon (Pd/C) 13412.
Palladium exists predominantly in the zero-valent state (Pd⁰) on the catalyst surface, where it activates molecular hydrogen for hydrogenation reactions 13. The typical palladium loading ranges from 0.1 to 5 wt% on the carbon support 412. The carbon support is preferably a mesoporous, graphite-like material with average mesopore size of 40–400 Å, mesopore volume fraction ≥0.5, and graphite similarity degree ≥20% 411. These structural characteristics ensure optimal dispersion of palladium crystallites and facilitate mass transfer of reactants and products within the porous network 411.
Catalyst preparation involves contacting activated carbon granules with an aqueous or organic solution of a palladium salt (e.g., palladium chloride, palladium acetate, or palladium nitrate), followed by drying and reduction with hydrogen to form metallic palladium crystallites 4812. A critical parameter is the distribution of palladium within the carbon granule: optimal performance is achieved when the metal crystallites are concentrated in a subsurface layer at a distance from the outer surface equal to 1–30% of the granule radius 4811. This distribution maximizes catalytic activity while minimizing diffusion limitations and sintering during operation 411.
Hydrorefining is conducted by dissolving crude TA in water at elevated temperature (typically 250–280°C) and passing the solution through a fixed-bed reactor containing the Pd/C catalyst under hydrogen pressure (20–50 bar) 136. Under these conditions, 4-CBA is hydrogenated to p-toluic acid, which remains soluble and is subsequently removed by crystallization 13. Colored impurities such as fluorenone and anthraquinone derivatives are also hydrogenated to colorless compounds 15. Purified terephthalic acid meeting polymerization specifications contains ≤25 ppm 4-CBA 13.
A significant advancement in hydrorefining catalysts is the development of bimetallic Pd-Ru systems supported on carbon 13. These catalysts comprise palladium and ruthenium in a weight ratio of (3–10):1 on an elemental basis 13. Palladium is present as Pd⁰, while ruthenium exists as a mixture of Ru⁰ and Ru⁴⁺, with the Ru⁴⁺/Ru⁰ weight ratio maintained at 0.1–1.0 13.
The synergistic interaction between palladium and ruthenium enhances both catalytic activity and resistance to sintering compared to monometallic Pd catalysts 13. Ruthenium in the +4 oxidation state stabilizes the palladium nanoparticles and provides additional active sites for hydrogen activation, while Ru⁰ participates directly in hydrogenation reactions 13. This dual-phase ruthenium composition is critical: catalysts with only Ru⁰ or only Ru⁴⁺ exhibit inferior performance 13.
Experimental results demonstrate that Pd-Ru/C catalysts achieve higher 4-CBA conversion rates and longer operational lifetimes than conventional Pd/C catalysts under identical conditions 13. The anti-sintering properties are particularly valuable in industrial continuous processes, where catalyst beds operate for extended periods (months to years) at high temperatures in corrosive aqueous environments 13.
An alternative purification strategy employs sequential hydrogenation stages using different noble metal catalysts in separate layers 6910. In one configuration, the crude TA solution first passes through a layer of ruthenium-on-carbon, rhodium-on-carbon, or platinum-on-carbon catalyst, followed by a layer of palladium-on-carbon catalyst 6. Optionally, a third layer of rhodium-on-carbon can be placed downstream from the palladium layer to further reduce residual 4-CBA 6.
This multi-layer approach exploits the distinct catalytic properties of each noble metal. Ruthenium, rhodium, and platinum preferentially hydrogenate certain colored impurities and aromatic ring systems, while palladium is most effective for 4-CBA reduction 69. The sequential arrangement ensures comprehensive impurity removal and produces purified TA with exceptionally low color values and 4-CBA content 6.
Palladium-rhodium bimetallic catalysts on porous carbonaceous supports represent another variant 9. These are prepared by first adsorbing palladium from a complex salt formed in the presence of an amine and acetic acid, followed by deposition of rhodium from a solution of sodium hexanitritorhodate 9. The resulting catalyst exhibits enhanced selectivity for 4-CBA hydrogenation while minimizing over-reduction of the terephthalic acid aromatic ring 9.
Rhodium-on-carbon catalysts have also been employed specifically for purifying terephthalic acid recycle streams (mother liquors) that contain oxidation catalysts, color bodies, and various impurities 10. Hydrogenation over Rh/C converts these impurities to saturated compounds that can subsequently be oxidized to carbon oxides, enabling recovery of high-purity terephthalic acid from the recycle stream 10.
The performance of hydrorefining catalysts depends critically on preparation methods and support properties 481112. Key factors include:
Carbon support selection: Activated carbons derived from coconut shells are preferred due to their high surface area (≥600 m²/g), appropriate pore size distribution, and chemical stability in hot aqueous acidic media 4811. The pH of the carbon water suspension should be controlled to optimize metal deposition 12.
Metal deposition method: Impregnation from aqueous or organic palladium salt solutions, followed by controlled drying and hydrogen reduction, yields well-dispersed metal crystallites 4812. The use of organic solvents (e.g., acetone, ethanol) can improve penetration of the metal precursor into the pore structure 12.
Reduction conditions: Hydrogen reduction temperature and time must be optimized to achieve complete conversion of palladium salts to Pd⁰ while avoiding excessive sintering 4812. Typical reduction temperatures are 200–400°C for 2–6 hours under flowing hydrogen 412.
Metal crystallite size and distribution: Smaller crystallites (2–10 nm) provide higher surface area and activity, but must be stabilized against sintering 411. The subsurface distribution (peak at 1–30% of granule radius) balances activity with diffusion efficiency 4811.
For bimetallic Pd-Ru catalysts, sequential impregnation (palladium first, then ruthenium) or co-impregnation methods can be employed 13. Controlled oxidation steps are used to generate the desired Ru⁴⁺/Ru⁰ ratio 13.
Hydrorefining catalysts gradually lose activity during operation due to several mechanisms 1415:
Metal sintering: Prolonged exposure to high temperatures (250–280°C) in aqueous environments causes palladium crystallites to agglomerate, reducing active surface area 1314.
Poisoning by metal impurities: Cobalt, manganese, iron, and sodium from the crude TA oxidation process accumulate on the catalyst surface, blocking active sites 1415. Sodium contamination is particularly problematic due to the porous nature of the carbon support, which traps sodium ions deep within the pore structure 14.
Fouling by organic deposits: High-molecular-weight colored impurities and polymerization products can deposit on the catalyst, obstructing pores and reducing accessibility to active sites 1415.
Leaching of active metal: Under acidic conditions and high temperatures, small amounts of palladium can dissolve and be lost from the catalyst 1415.
These deactivation processes lead to declining 4-CBA conversion, increasing color values in the purified TA product, and eventual need for catalyst replacement or reactivation 1415.
Several strategies have been developed to restore catalyst activity and extend operational lifetime 1415:
Caustic washing: Treatment with dilute sodium hydroxide solution (0.1–2 wt%) at 50–100°C removes acidic impurities and some metal contaminants 1415. However, this introduces sodium, which must be subsequently removed 14.
Hot water flushing: Flushing the catalyst bed with water at temperatures ≥50°C (preferably 70–95°C) effectively removes sodium and other water-soluble impurities 14. Hot water is significantly more effective than room-temperature water for extracting sodium from the porous carbon structure 14. Flushing volumes of 5–20 bed volumes are typically required 14.
Hydrogen reduction: Treating the deactivated catalyst with hydrogen at 200–350°C can re-reduce oxidized palladium species and remove some organic deposits through hydrogenolysis 15. This step is often combined with washing procedures 15.
Oxidative regeneration: Controlled oxidation with air or oxygen at 300–450°C burns off carbonaceous deposits, followed by hydrogen reduction to restore the active metal phase 15. This method is effective but must be carefully controlled to avoid excessive metal sintering or carbon support combustion 15.
A comprehensive reactivation protocol typically involves: (1) caustic washing
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| CHINA PETROLEUM & CHEMICAL CORPORATION | Industrial hydrorefining of crude terephthalic acid for polyester-grade PTA production, particularly in continuous fixed-bed reactors operating at 250-280°C under high-temperature aqueous corrosive environments. | Pd-Ru/C Hydrorefining Catalyst | Bimetallic Pd-Ru catalyst with Pd:Ru weight ratio of 3-10:1 and Ru4+/Ru0 ratio of 0.1-1.0 achieves superior catalytic activity and anti-sintering performance, reducing 4-CBA content to below 25 ppm in purified terephthalic acid. |
| SABIC GLOBAL TECHNOLOGIES B.V. | Liquid-phase oxidation of p-xylene to terephthalic acid in acetic acid solvent at 120-275°C, suitable for large-scale commodity chemical production requiring reduced impurity levels and lower downstream purification costs. | Multidentate Ligand Catalyst System | Manganese and cobalt complexes with tetradentate or pentadentate ligands reduce 4-CBA content in crude terephthalic acid to below 2000 ppm compared to 9000 ppm with conventional Co/Mn/Br systems, while minimizing bromine-induced equipment corrosion. |
| RELIANCE INDUSTRIES LIMITED | Commercial terephthalic acid production from p-xylene oxidation at 100-250°C and 10-60 bar, particularly for processes requiring high-purity crude TA with minimal hydrorefining requirements for PET manufacturing. | Ionic Liquid-Enhanced Oxidation Process | Incorporation of ionic liquids (0.04-50 wt%) with Co/Mn catalysts achieves 4-CBA levels below 2000 ppm, with optimized formulations reaching less than 100 ppm by enhancing intermediate solubility and preventing co-crystallization. |
| AMOCO CORPORATION | Advanced purification of crude terephthalic acid solutions in fixed-bed reactors for premium polyester applications requiring stringent purity specifications, including high-quality textile fibers and optical-grade PET films. | Multi-Layer Noble Metal Purification System | Sequential hydrogenation using Ru/C or Rh/C followed by Pd/C catalyst layers achieves comprehensive impurity removal including colored bodies and 4-CBA, producing exceptionally low color values and ultra-pure terephthalic acid. |
| SABIC GLOBAL TECHNOLOGIES B.V. | Regeneration and reactivation of hydrorefining catalysts in continuous terephthalic acid purification plants to prevent catalyst poisoning, reduce metal leaching into product, and minimize quality issues in downstream PET production. | Hot Water Catalyst Reactivation Technology | Flushing deactivated Pd/C catalysts with water at temperatures ≥50°C (preferably 70-95°C) effectively removes sodium and metal contaminants from porous carbon structure, extending catalyst operational lifetime and maintaining product quality. |