Unlock AI-driven, actionable R&D insights for your next breakthrough.

Terephthalic Acid And Crude Terephthalic Acid: Comprehensive Analysis Of Purification Technologies, Production Processes, And Industrial Applications

NOV 17, 202658 MINS READ

Want An AI Powered Material Expert?
Here's Patsnap Eureka Materials!
Terephthalic Acid (TPA), particularly in its purified form, serves as a critical starting material for polyester resin production, which is extensively utilized in fibers, films, plastic bottles, and reinforced composite structures. Crude Terephthalic Acid (CTA), obtained primarily through the liquid-phase oxidation of para-xylene (p-xylene) with molecular oxygen, contains significant impurities including 4-carboxybenzaldehyde (4-CBA), unreacted precursors, and colored by-products that must be removed to meet stringent polyester-grade specifications 1,6. This article provides an in-depth examination of the chemical composition, purification methodologies, catalytic systems, and industrial applications of Terephthalic Acid and Crude Terephthalic Acid, targeting advanced R&D professionals seeking to optimize production efficiency and product quality.
Want to know more material grades? Try Patsnap Eureka Material.

Chemical Composition And Structural Characteristics Of Terephthalic Acid

Terephthalic Acid (benzene-1,4-dicarboxylic acid, C₈H₆O₄) is an aromatic dicarboxylic acid with a molecular weight of 166.13 g/mol. The compound exhibits a highly symmetrical structure with two carboxyl groups (-COOH) positioned para to each other on the benzene ring, conferring exceptional thermal stability and crystallinity. Pure TPA typically appears as white crystalline powder with a melting point of approximately 300°C (sublimes before melting under atmospheric pressure) and demonstrates extremely low solubility in water at room temperature (0.002 g/100 mL at 25°C) but significantly enhanced solubility at elevated temperatures (1.2 g/100 mL at 200°C) 1,6. The compound's density ranges from 1.51 to 1.55 g/cm³ depending on crystalline form and hydration state 12.

Crude Terephthalic Acid, the direct product of p-xylene oxidation, contains TPA as the major component (typically 95-99 wt%) alongside critical impurities that impact downstream polyester quality:

  • 4-Carboxybenzaldehyde (4-CBA): The primary impurity, present at concentrations of 1,000-10,000 ppm in CTA, originates from incomplete oxidation of p-toluic acid intermediates 10,12,14. This aldehyde functionality causes undesirable side reactions during polymerization, leading to color formation and reduced polymer molecular weight.
  • Para-toluic acid (p-TA): Residual concentrations of 50-500 ppm result from incomplete methyl group oxidation 16.
  • Colored impurities: Fluorescent compounds and conjugated aromatic structures formed through side reactions contribute to yellowness, typically measured as b* values of 2-8 in CTA versus <1 in purified TPA 7,13.
  • Catalyst residues: Cobalt, manganese, and bromine compounds from the oxidation catalyst system remain at trace levels (10-100 ppm total metals) 11.

The chemical stability of TPA is exceptional under neutral and mildly acidic conditions, with negligible decomposition below 280°C in inert atmospheres. However, the compound undergoes decarboxylation above 350°C, releasing CO₂ and forming benzoic acid derivatives. Thermogravimetric analysis (TGA) of high-purity TPA shows onset decomposition at 385°C with 5% weight loss at 420°C under nitrogen atmosphere 12. The presence of impurities, particularly 4-CBA, significantly lowers thermal stability, with decomposition onset shifting to 340-360°C in CTA samples 10.

Precursors And Synthesis Routes For Crude Terephthalic Acid Production

The industrial production of Crude Terephthalic Acid predominantly employs the Mid-Century (MC) process or its variants, involving liquid-phase catalytic oxidation of para-xylene. The reaction proceeds via a free-radical mechanism in acetic acid solvent at temperatures of 170-230°C and pressures of 1.5-3.0 MPa 11,14. The stoichiometric reaction can be represented as:

C₆H₄(CH₃)₂ + 3O₂ → C₆H₄(COOH)₂ + 2H₂O

Key process parameters and their impacts include:

  • Catalyst system: Cobalt acetate (1,000-3,000 ppm Co), manganese acetate (500-1,500 ppm Mn), and bromide promoter (500-2,000 ppm Br as HBr or NaBr) constitute the standard catalyst formulation 11. Cobalt and manganese ions facilitate radical initiation and propagation, while bromide accelerates methyl group oxidation through formation of benzyl bromide intermediates. Recent innovations incorporate samarium (5-500 ppm) as a co-catalyst to enhance selectivity and reduce 4-CBA formation 11.
  • Temperature control: Maintaining 190-210°C optimizes conversion (>99%) while minimizing over-oxidation to CO and CO₂. Temperature excursions above 230°C increase acetic acid combustion losses (>5 wt%) and promote formation of colored by-products 11,14.
  • Oxygen partial pressure: Operating at 0.5-1.2 MPa O₂ partial pressure ensures sufficient oxygen availability for complete oxidation while avoiding explosive mixtures. Oxygen feed rates of 0.4-10 moles O₂ per mole p-xylene are typical, with higher ratios favoring 4-CBA reduction 10.
  • Residence time: Reaction times of 60-120 minutes in continuous stirred-tank reactors (CSTR) or bubble column reactors achieve >98% p-xylene conversion with 95-97% selectivity to TPA 14.

Alternative precursors and synthesis routes include:

  • p-Tolualdehyde oxidation: Employing p-tolualdehyde as feedstock with molecular oxygen in aqueous medium using bromine catalysts yields CTA with lower 4-CBA content (200-800 ppm) but requires additional aldehyde synthesis steps 3,5.
  • p-Diisopropylbenzene oxidation: Nitric acid oxidation of p-diisopropylbenzene produces TPA but generates nitrogen-containing impurities requiring specialized purification via N-alkyl-pyrrolidone recrystallization 9.
  • Dimethyl terephthalate (DMT) hydrolysis: Historical route involving esterification of p-xylene oxidation products followed by hydrolysis; largely obsolete due to higher capital costs and waste generation compared to direct TPA routes 6.

The crude TPA product from p-xylene oxidation is recovered as a slurry in acetic acid mother liquor (10-30 wt% TPA) through cooling crystallization to 90-120°C, followed by centrifugal separation or filtration to yield a filter cake containing 50-70 wt% TPA with residual acetic acid and impurities 1,2,6. This CTA filter cake serves as feedstock for subsequent purification processes.

Purification Technologies For Crude Terephthalic Acid: Methodologies And Performance Metrics

The transformation of Crude Terephthalic Acid into polymer-grade Purified Terephthalic Acid (PTA) requires reduction of 4-CBA content from 1,000-10,000 ppm to <25 ppm (typically <10 ppm for premium grades) and removal of colored impurities to achieve b* color values <1.0 10,12,14. Three principal purification strategies dominate industrial practice:

Hydrogenation-Based Purification Processes

Catalytic hydrogenation represents the most widely adopted purification technology, leveraging selective reduction of 4-CBA to p-toluic acid (which remains in solution) and hydrogenation of colored aromatic compounds to colorless saturated derivatives 4,7,13. The process comprises:

Dissolution stage: CTA filter cake is slurried with water (15-65 parts TPA per 100 parts water) and heated to 250-320°C under pressure (5-15 MPa, preferably 7-10 MPa) to achieve complete dissolution 12,14. Rapid heating (<3 minutes from 250°C to reaction temperature) minimizes thermal degradation and by-product formation 12.

Hydrogenation reaction: The aqueous TPA solution is contacted with hydrogen gas (0.05-10 NM³ H₂/hr per ton TPA solution, preferably 0.1-3 NM³/hr) in the presence of platinum-group metal catalysts 12,15. Key reaction conditions include:

  • Temperature: 260-320°C (optimal 270-300°C) to balance reaction kinetics against thermal side reactions 12,14
  • Pressure: 5-15 MPa total pressure (6-10 MPa preferred) with hydrogen partial pressure maintained at levels calculated from correlation with liquid downward superficial velocity 8
  • Residence time: 10-200 minutes (typically 30-90 minutes) depending on catalyst activity and impurity levels 12
  • Catalyst loading: 0.1-10 wt% palladium on activated carbon (Pd/C) is standard, with 0.5-2 wt% Pd providing optimal balance of activity and cost 12,13

Multi-catalyst systems: Sequential catalyst beds enhance purification efficiency 13,15:

  • Initial bed: Ruthenium-on-carbon, rhodium-on-carbon, or platinum-on-carbon (0.5-5 wt% metal loading) for primary 4-CBA reduction and color body hydrogenation 13
  • Secondary bed: Palladium-on-carbon (0.5-2 wt% Pd) for residual impurity removal and color stabilization 13
  • Optional tertiary bed: Rhodium-on-carbon downstream for ultra-low 4-CBA specifications (<5 ppm) 13

Micro-interface enhancement: Recent innovations employ hydrogen micro-interface generators positioned at the reactor bottom to disperse hydrogen into fine bubbles (50-500 μm diameter), extending gas-liquid contact time and increasing interfacial area by 5-10 fold 15. This technology reduces required reaction pressure from 10-15 MPa to 5-8 MPa while maintaining equivalent 4-CBA conversion (>99.5%), decreasing catalyst consumption by 20-30%, and improving energy efficiency by 15-25% 15.

Crystallization and recovery: The hydrogenated solution undergoes stepwise cooling crystallization in multi-stage crystallizers (typically 3-5 stages in series) operating at progressively lower temperatures (220°C → 180°C → 140°C → 100°C → 80°C) and pressures 2,14,16. Each stage achieves 10-60 wt% solvent evaporation through pressure reduction, driving TPA precipitation while maintaining crystal size distribution (D₅₀ = 80-150 μm) favorable for filtration 2,14. The crystallized PTA slurry is separated via centrifugation or pressure filtration, washed with water or dilute acetic acid, and dried to <0.5 wt% moisture content 1,6.

Performance metrics for hydrogenation-based purification:

  • 4-CBA reduction: From 3,000-8,000 ppm (CTA) to 5-15 ppm (PTA), representing >99.8% removal efficiency 10,12
  • Color improvement: b* value reduction from 4-8 (CTA) to 0.5-1.0 (PTA) 7,13
  • TPA yield: 96-98% based on CTA input, with losses primarily to mother liquor and wash streams 1,6
  • Catalyst life: 6-18 months for Pd/C catalysts before regeneration or replacement, depending on feedstock quality and operating severity 12,13

Recrystallization-Based Purification Using Non-Aqueous Solvents

An alternative purification approach employs selective crystallization from non-aqueous, non-corrosive solvents that preferentially dissolve TPA at elevated temperatures while rejecting impurities 1,6,9. N-methyl pyrrolidone (NMP) is the preferred solvent due to its exceptional TPA solubility (40-60 wt% at 200-250°C versus 1-2 wt% at 25°C), chemical stability, and low reactivity with TPA 1,6,9.

Process sequence:

  • Dissolution: CTA filter cake is dissolved in NMP at 180-250°C (typically 200-230°C) to form a solution containing 6-40 parts TPA per 100 parts solvent 1,2. Higher TPA concentrations (>30 parts/100 parts) improve process economics but may compromise impurity rejection.
  • Hot filtration: The solution is filtered at dissolution temperature to remove insoluble particles and catalyst residues 1.
  • Crystallization: Cooling to 80-120°C (cooling rate 0.5-2°C/min) precipitates purified TPA crystals while 4-CBA, p-toluic acid, and colored impurities remain preferentially in solution 1,6. Alternatively, pressure reduction at constant temperature (200-250°C) evaporates 10-60 wt% of solvent, driving supersaturation and crystallization 2.
  • Separation and solvent recovery: Crystallized PTA is separated by filtration or centrifugation, washed with fresh NMP, and dried. Mother liquor NMP is recovered by distillation (boiling point 202°C at atmospheric pressure) and recycled, with purge streams removing accumulated impurities 1,6.

Other N-alkyl pyrrolidones (N-ethyl, N-propyl, N-butyl) exhibit similar selectivity but inferior solvent recovery economics compared to NMP 9. Acetic acid or aqueous acetic acid (≤50 wt% water) can also serve as recrystallization solvents, particularly in integrated processes where acetic acid from the oxidation step is directly utilized 2,11.

Performance characteristics:

  • 4-CBA reduction: From 2,000-6,000 ppm to 50-150 ppm in single-stage recrystallization; multi-stage processes achieve <25 ppm 1,9
  • Color improvement: Moderate, with b* values of 1.5-2.5 typical for NMP-recrystallized TPA 9
  • TPA yield: 85-92% per stage, with 2-3 stages required for polymer-grade purity 1,6
  • Capital cost: 30-40% lower than hydrogenation routes due to elimination of high-pressure reactors and hydrogen handling systems 1,6
  • Operating cost: Competitive for smaller-scale plants (<100,000 tons/year) but less favorable at large scale due to solvent inventory and energy for solvent recovery 6

Hybrid And Advanced Purification Strategies

Combining oxidative pre-treatment with hydrogenation enhances purification efficiency for CTA feedstocks with exceptionally high 4-CBA content (>5,000 ppm) 10. The process involves:

  • Oxidative treatment: High-temperature aqueous CTA solution (250-300°C) is contacted with oxygen-containing gas (air or oxygen-enriched air) at 0.4-10 moles O₂ per mole 4-CBA for 10-60 minutes 10. This oxidizes 4-CBA to terephthalic acid, reducing aldehyde content by 60-80% prior to hydrogenation.
  • Subsequent hydrogenation: The oxidized solution undergoes standard catalytic hydrogenation, achieving final 4-CBA levels <10 ppm with reduced hydrogen consumption (20-30% lower) and extended catalyst life (30-50% longer) compared to direct hydrogenation of untreated CTA 10.

Alkaline additive enhancement: Addition of hydroxides, carbonates, or bicarbonates of sodium, potassium, calcium, or barium (0.1-2.0 wt% based on TPA) to the aqueous CTA solution prior to hydrogenation improves catalyst stability and activity 3,5. The alkaline environment neutralizes trace acidic impurities that otherwise poison catalyst active sites, enabling 4-CBA reduction from 3,000-5,000 ppm to <15 ppm with 15-25% lower catalyst loading 3,5.

Mother liquor purification and recycle: Acetic acid mother liquor from C

OrgApplication ScenariosProduct/ProjectTechnical Outcomes
GTC TECHNOLOGY INCEconomically attractive purification for small to medium-scale PTA plants (<100,000 tons/year) producing polyester-grade terephthalic acid for fiber, film, and plastic bottle applications.PTA Purification ProcessNon-aqueous N-methyl pyrrolidone recrystallization achieves polymer-grade purity with 30-40% lower capital cost, operating at reduced severity conditions, producing PTA with 4-CBA reduced from 2,000-6,000 ppm to 50-150 ppm.
MITSUBISHI GAS CHEMICAL CO INCHigh-purity PTA production from p-tolualdehyde oxidation-derived crude terephthalic acid for polyester resin manufacturing requiring ultra-low impurity specifications.Alkaline-Enhanced Hydrogenation ProcessAddition of alkaline materials (hydroxides, carbonates, bicarbonates) to aqueous CTA solution reduces 4-CBA from 3,000-5,000 ppm to <15 ppm with 15-25% lower catalyst loading, preventing catalyst poisoning and extending catalyst life.
AMOCO CORPORATIONLarge-scale continuous PTA purification plants requiring stringent polymer-grade specifications for high-performance polyester fiber and film production.Multi-Catalyst Hydrogenation SystemSequential catalyst beds using ruthenium/rhodium/platinum-on-carbon followed by palladium-on-carbon achieve >99.8% 4-CBA removal efficiency, reducing impurities from 3,000-8,000 ppm to 5-15 ppm with improved color quality (b* value 0.5-1.0).
MITSUI PETROCHEMICAL INDUSTRIES LTDPurification of high-impurity crude terephthalic acid (>5,000 ppm 4-CBA) from para-xylene oxidation for cost-effective production of polyester-grade PTA.Oxidation-Hydrogenation Hybrid ProcessPre-oxidation treatment with oxygen (0.4-10 moles O₂ per mole 4-CBA) reduces aldehyde content by 60-80% before hydrogenation, decreasing hydrogen consumption by 20-30% and extending catalyst life by 30-50% while achieving final 4-CBA <10 ppm.
NANJING INSTITUTE OF MICROINTERFACE TECHNOLOGY CO LTDEnergy-efficient PTA purification in resource-constrained facilities and retrofit applications requiring reduced operating pressure and improved mass transfer efficiency for hydrogenation reactions.Micro-Interface Enhanced Hydrogenation ReactorHydrogen micro-interface generator creates 50-500 μm bubbles, extending gas-liquid contact time and increasing interfacial area 5-10 fold, reducing reaction pressure from 10-15 MPa to 5-8 MPa while maintaining >99.5% 4-CBA conversion and decreasing catalyst consumption by 20-30%.
Reference
  • Method and apparatus for purifying crude terephthalic acid
    PatentInactiveEP0857170B1
    View detail
  • Process for the continuous purification of crude terephthalic acid
    PatentInactiveGB1253373A
    View detail
  • Process for Purifying Terephthalic Acid
    PatentInactiveGB2051039B
    View detail
If you want to get more related content, you can try Eureka.

Discover Patsnap Eureka Materials: AI Agents Built for Materials Research & Innovation

From alloy design and polymer analysis to structure search and synthesis pathways, Patsnap Eureka Materials empowers you to explore, model, and validate material technologies faster than ever—powered by real-time data, expert-level insights, and patent-backed intelligence.

Discover Patsnap Eureka today and turn complex materials research into clear, data-driven innovation!

Group 1912057372 (1).pngFrame 1912060467.png