NOV 17, 202654 MINS READ
Terephthalic Acid Recycled Grade retains the fundamental molecular structure of virgin terephthalic acid (1,4-benzenedicarboxylic acid, C₈H₆O₄), with a molecular weight of 166.13 g/mol and characteristic carboxyl groups positioned para to each other on the benzene ring. The recycled variant, however, requires rigorous characterization to distinguish it from virgin material due to potential trace impurities originating from waste feedstock heterogeneity 3.
Key molecular and compositional attributes include:
The molecular integrity of r-TA is verified through ¹H NMR spectroscopy in DMSO-d₆, where aromatic proton signals at δ 8.1 ppm confirm structural fidelity, while integration of carboxyl carbon signals via ¹³C NMR at δ 167 ppm quantifies esterification potential 9. Differential scanning calorimetry (DSC) reveals melting endotherms at 300–302°C, consistent with virgin TA, though trace oligomer content may depress onset temperatures by 2–5°C 3.
The preparation of Terephthalic Acid Recycled Grade commences with depolymerization of post-consumer PET waste, employing either glycolysis, methanolysis, or hydrolysis pathways depending on target purity and economic constraints 3 11.
Glycolysis-based routes involve transesterification of PET with ethylene glycol (EG) at 180–240°C in the presence of metal acetate catalysts (e.g., zinc acetate at 0.5–1.0 wt%), yielding bis(2-hydroxyethyl) terephthalate (BHET) as an intermediate 3. Subsequent hydrolysis of BHET with aqueous NaOH (2–4 M) at 90–120°C for 2–4 hours produces disodium terephthalate, which is acidified with H₂SO₄ (25 wt%) to precipitate crude r-TA 6.
Methanolysis pathways utilize methanol at 180–220°C with alkaline catalysts (NaOH, KOH at 1–3 wt%) to generate dimethyl terephthalate (DMT), followed by saponification and acidification 3. This route offers advantages in separating cotton-polyester blends, as cellulosic fibers remain insoluble in methanol 3.
Direct hydrolysis under supercritical water conditions (374°C, 22.1 MPa) enables catalyst-free depolymerization, though energy intensity limits industrial adoption 11. Subcritical hydrolysis at 200–250°C and 2–5 MPa with residence times of 30–90 minutes provides a compromise, achieving >95% PET conversion while co-recovering ethylene glycol 11.
Feedstock preprocessing is critical for r-TA quality: multilayer PET/PE films require mechanical separation or selective dissolution in xylene to remove polyethylene contaminants 6, while textile waste necessitates dye extraction via activated carbon adsorption or solvent extraction prior to depolymerization 6.
Post-depolymerization purification determines the commercial viability of r-TA. Sequential purification protocols integrate multiple unit operations to systematically remove colorants, oligomers, and metal residues 1.
Multi-stage filtration cascades begin with hot filtration (80–95°C) of the alkaline terephthalate solution through 10–25 μm cartridge filters to remove suspended solids and polyethylene fragments 6. Subsequent activated carbon treatment (2–5 wt% dosage, 60–90 min contact time) adsorbs dyes and aromatic impurities, reducing color b values by 60–80% 1.
Ultrasonic treatment at 20–40 kHz and power densities of 50–150 W/L enhances impurity removal efficiency by disrupting agglomerated particles and promoting mass transfer 8. Application of ultrasound to the terephthalate salt slurry for 15–45 minutes prior to filtration increases sludge cake purity by 15–25% and reduces residual solvent content 8.
Recrystallization in organic solvents (e.g., N-methyl-2-pyrrolidone, dimethylformamide) at 150–200°C followed by controlled cooling (0.5–2°C/min) yields high-purity r-TA crystals, as isophthalic acid and oligomers preferentially remain in solution due to solubility differentials 9. A critical innovation involves washing recrystallized r-TA with superheated solvent at 200–300°C, which dissolves interstitial impurities while preserving crystal integrity, thereby elevating TA content from 98.5 mol% to >99.5 mol% 9.
Acidification optimization employs dilute sulfuric acid (15–25 wt%) added dropwise to maintain pH 2.0–2.5, minimizing co-precipitation of metal sulfates while maximizing r-TA yield (>92% based on PET input) 6. The precipitated r-TA undergoes three-stage washing with deionized water (solid-to-liquid ratio 1:5, 60–80°C) to reduce residual sulfate to <50 ppm 1.
For applications requiring controlled isophthalic acid content (e.g., copolyesters with enhanced flexibility), blending of PET waste streams with varying IPA levels prior to depolymerization enables precise isomer ratio tuning 5 7. Bottle-grade PET typically contains <0.5 mol% IPA, while textile PET may contain 2–8 mol% IPA depending on original fiber specifications 5.
Selective crystallization exploits the 15–20°C difference in solubility temperature between TA and IPA in acetic acid: cooling a mixed solution from 120°C to 80°C at 0.3°C/min preferentially crystallizes TA (recovery >85%), while IPA remains dissolved and can be recovered in a second crystallization stage 2 5. This approach yields r-TA/r-IPA blends with IPA content adjustable from 0.001 to 25 wt%, suitable for modified PET (PETG), polybutylene terephthalate (PBT) copolymers, and thermoplastic polyester elastomers (TPEE) 5 7.
Polymer-grade r-TA must satisfy stringent specifications to ensure compatibility with existing polymerization infrastructure and final product performance 4 10.
Primary purity indicators include:
Metal impurity limits are dictated by polymerization catalyst sensitivity and food-contact regulations: total metals <100 ppm 12, with Sb <6 ppm (to avoid interference with Sb₂O₃ polycondensation catalyst) 12, Ti <5 ppm (prevents gel formation with titanate catalysts) 12, and heavy metals (Pb, Cd, Hg) each <1 ppm per FDA 21 CFR 177.1630 4.
Color specifications for bottle-grade r-TA require L* >95, a* <1.5, b* <2.0 in CIE Lab color space (reflection mode, D65 illuminant), ensuring final PET resin achieves L* >80 without additional brightening agents 4. Yellowness index (YI) per ASTM E313 should remain <5 for r-TA powder 10.
Inductively coupled plasma atomic emission spectroscopy (ICP-AES) quantifies 24 elements simultaneously with detection limits of 0.1–1 ppm, enabling comprehensive metal profiling 12. Sample preparation involves microwave-assisted acid digestion (HNO₃/HCl 3:1, 180°C, 15 min) followed by dilution to 2–5% acid matrix 12.
Nuclear magnetic resonance (NMR) spectroscopy provides definitive structural confirmation: ¹H NMR in DMSO-d₆ at 500 MHz resolves aromatic protons (δ 8.10 ppm, singlet) and carboxyl protons (δ 13.2 ppm, broad singlet exchangeable with D₂O), while ¹³C NMR distinguishes carbonyl carbons (δ 167 ppm) from aromatic carbons (δ 129–135 ppm) 9. Integration ratios enable precise quantification of TA, IPA, and residual ester groups 9.
Thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) assesses thermal stability: high-purity r-TA exhibits <0.5 wt% mass loss below 300°C (moisture and volatiles), with primary decomposition onset at 385–410°C under nitrogen 3. DSC endotherms at 300–302°C (ΔH 35–38 kJ/mol) confirm crystalline purity, while exothermic events below 250°C indicate oligomer content requiring further purification 3.
Gas chromatography-mass spectrometry (GC-MS) of derivatized samples (trimethylsilyl esters) detects trace organic impurities: phthalic acid, benzoic acid, and diethylene glycol terephthalate oligomers are quantified at ppb levels, with total organic impurities maintained <200 ppm 10.
High-purity r-TA (>99.5 mol% TA, <30 ppm total Sb/Ti/Zn) can replace virgin TA at 100% substitution rates in direct esterification processes without modification to reactor design or catalyst systems 4. Esterification with ethylene glycol proceeds at 240–260°C and 1–3 bar, achieving >98% conversion in 2–4 hours with conventional Sb₂O₃ catalysts (200–300 ppm Sb) 6.
Key process parameters for r-TA polymerization include:
Polyester resins synthesized from 100% r-TA demonstrate mechanical properties equivalent to virgin PET: tensile strength 55–65 MPa (ASTM D638), elongation at break 80–150%, and glass transition temperature (Tg) 78–82°C 4. Bottle-grade PET from r-TA achieves acetaldehyde content <1 ppm (critical for beverage applications) when polymerized under optimized vacuum profiles 4.
Controlled-isomer r-TA/r-IPA blends enable synthesis of modified polyesters with tailored properties 5 7. Incorporation of 2–8 mol% isophthalic acid disrupts crystallinity, reducing Tg by 5–15°C and enhancing transparency for thermoforming applications 5.
Polybutylene terephthalate (PBT) synthesis from r-TA and 1,4-butanediol (BDO) at 230–250°C yields engineering thermoplastics with crystallization half-times of 0.8–1.5 min (comparable to virgin PBT), suitable for injection molding of electrical connectors and automotive components 5. The presence of 0.5–2 mol% IPA in r-TA accelerates crystallization kinetics by 10–20%, improving mold cycle efficiency 5.
Thermoplastic polyester elastomers (TPEE) formulated with r-TA, poly(tetramethylene ether) glycol (PTMEG, Mn 1000–2000 g/mol), and 1,4-butanediol exhibit Shore D hardness 40–65 and tensile strength 30–45 MP
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| TERRACLE CO. LTD. | Polymer-grade recycled terephthalic acid production for bottle-grade PET, fiber manufacturing, and film applications requiring high purity and low color index. | Sequential Purification r-TA | Achieves >99.5 mol% terephthalic acid purity through multi-stage filtration, activated carbon treatment, and recrystallization with superheated solvent washing at 200-300°C, reducing metal impurities below 100 ppm and color b values <2. |
| RITTEC UMWELTTECHNIK GMBH | Modified polyester production including PETG, polybutylene terephthalate (PBT), and thermoplastic polyester elastomers (TPEE) requiring controlled isomer ratios for tailored mechanical properties. | Isomer-Controlled r-TA/r-IA Recovery System | Enables tunable isophthalic acid content between 0.001-25 wt% through selective crystallization and mixed waste stream processing, producing customized monomer blends for copolymer synthesis. |
| SK CHEMICALS CO. LTD. | Food-contact grade PET bottle production, textile fiber recycling, and direct esterification polymerization processes requiring ultra-low metal contamination. | High-Purity r-TA from Mixed Textiles | Achieves total metal content <30 ppm (Sb <6 ppm, Ti <5 ppm, Zn <3 ppm) through optimized depolymerization and hydrolysis with specific catalysts, enabling direct replacement of virgin TA at 100% substitution rates. |
| TERRACLE CO. LTD. | High-throughput recycling facilities processing mixed PET waste streams requiring enhanced impurity removal efficiency and reduced processing time. | Ultrasonic-Assisted r-TA Purification | Ultrasonic treatment at 20-40 kHz increases sludge cake purity by 15-25% and reduces residual solvent content through enhanced mass transfer and particle dispersion during terephthalate salt processing. |
| EASTMAN CHEMICAL COMPANY | Integrated PET recycling plants targeting co-recovery of both monomers for closed-loop polyester production in fiber and bottle manufacturing. | Hydrolytic r-TA Recovery Process | Recovers polymer-grade terephthalic acid and ethylene glycol simultaneously through supercritical/subcritical water hydrolysis at 200-250°C, achieving >95% PET conversion without organic solvents. |