NOV 17, 202655 MINS READ
The fundamental distinction between terephthalic acid and phthalic acid originates from their positional isomerism on the benzene ring. Terephthalic acid (TPA, para-phthalic acid) exhibits a symmetrical linear structure with two carboxyl groups (-COOH) located at the 1,4-positions (para configuration), yielding the molecular formula C₆H₄(COOH)₂2. This para arrangement facilitates extended chain packing and high crystallinity, critical for fiber-forming polymers. Conversely, phthalic acid (ortho-phthalic acid, PA) positions its carboxyl groups at the 1,2-positions (ortho configuration), resulting in a bent molecular geometry12. The ortho configuration induces intramolecular hydrogen bonding and facile dehydration to phthalic anhydride upon heating above 180°C, a transformation not observed in terephthalic acid due to spatial separation of carboxyl groups14.
Key structural parameters include:
The isomeric difference also manifests in spectroscopic signatures: TPA exhibits characteristic IR absorption for symmetric and antisymmetric carboxyl stretches at ~1680 cm⁻¹ and ~1420 cm⁻¹, while PA shows additional anhydride carbonyl peaks (~1850 cm⁻¹, ~1770 cm⁻¹) upon partial dehydration14.
The dominant industrial route for terephthalic acid synthesis involves the catalytic liquid-phase oxidation of para-xylene (p-xylene) using molecular oxygen (air) in acetic acid solvent, commonly termed the Mid-Century (MC) or Amoco process2713. Critical process parameters include:
Alternative synthetic routes include:
Phthalic anhydride, the commercial precursor to phthalic acid, is predominantly synthesized via:
The ortho-xylene feedstock for phthalic anhydride is typically separated from mixed xylene streams by fractional distillation, exploiting the 6°C boiling point difference between o-xylene (144°C) and m-xylene (139°C)2. In contrast, para-xylene separation from m-xylene requires cryogenic crystallization or selective adsorption due to the minimal boiling point difference (138°C vs. 139°C)23.
A critical challenge in terephthalic acid production and application is the separation of isophthalic acid (IPA, meta-isomer) and phthalic acid from terephthalic acid, as these isomers frequently co-occur in oxidation product streams or as impurities3611. The separation difficulty arises from:
Fractional crystallization from hot acetic acid or water: The most common industrial method involves dissolving crude TPA in acetic acid at 180–250°C, cooling to 50–100°C to precipitate high-purity TPA, and recycling the mother liquor enriched in IPA and PA311. A side-stream (15–75% of total flow) is further cooled to <50°C to crystallize isophthalic acid, which is removed and either sold as a co-product or recycled to the oxidation reactor11. This process achieves TPA purity >99.9 wt% with <150 ppm IPA1112.
Selective esterification: Isophthalic acid reacts preferentially with primary alkanols (C₄–C₁₀, e.g., 2-ethylhexanol, 1-octanol) in the presence of strong acid catalysts (H₂SO₄, 0.1–1.0 wt%) at 80–150°C, forming dialkyl isophthalate esters that remain soluble while terephthalic acid precipitates as the free acid6. After 12–21 hours reflux, residues containing 89.5–96.1% TPA are recovered by filtration6. This method is advantageous when isophthalate esters are desired as plasticizers.
Thermal rearrangement and re-acidification: Mixtures of alkali metal phthalates and isophthalates can be thermally isomerized to terephthalate at >340°C, followed by selective crystallization of the terephthalate salt and acidification to yield pure TPA114. This route is suitable for recycling off-spec material but incurs high energy costs.
Hydrogenation-oxidation purification: Crude TPA containing 4-carboxybenzaldehyde (4-CBA, a key impurity) is dissolved in water at 250–280°C, hydrogenated over Pd/C catalyst (5–10 bar H₂, 200–250°C) to convert 4-CBA to p-toluic acid, then re-oxidized with air/Co-Mn-Br catalyst to regenerate TPA with <25 ppm 4-CBA412. This process also reduces trace IPA and PA by selective oxidation or solubility-based removal during recrystallization4.
Terephthalic acid is the cornerstone monomer for polyethylene terephthalate (PET), a semi-crystalline thermoplastic polyester with global production exceeding 30 million tons annually as of 200613. Key performance attributes derived from TPA's para structure include:
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| HENKEL & COMPAGNIE G.M.B.H. | Chemical manufacturing facilities requiring conversion of abundant ortho-phthalic acid to high-value para-terephthalic acid for polyester production. | Terephthalic Acid Isomerization Process | Thermal rearrangement of dipotassium phthalate at >340°C achieves 60-75% conversion to terephthalate salts, enabling utilization of readily available phthalic acid feedstock. |
| STANDARD OIL COMPANY | Purification of crude terephthalic acid in PET polyester production where trace isophthalic acid impurities degrade polymer chain formation. | Fractional Crystallization Separation Technology | Exploits 10-fold solubility differential between isophthalic acid (1-2 g/100mL) and terephthalic acid (0.1-0.2 g/100mL) in hot acetic acid to achieve >99.9 wt% TPA purity with <150 ppm isophthalic acid. |
| IMPERIAL CHEMICAL INDUSTRIES LIMITED | Production of purified terephthalic acid (PTA) for high-performance polyester fibers and films requiring minimal chain-terminating impurities. | High-Temperature Aqueous Recrystallization Process | Heating crude terephthalic acid with water at 230-280°C followed by controlled cooling removes impurities including phthalic acid, isophthalic acid, and 4-carboxybenzaldehyde to <25 ppm levels. |
| THE DISTILLERS COMPANY LIMITED | Separation of terephthalic acid from isophthalic acid mixtures while co-producing valuable plasticizer esters for PVC and resin applications. | Selective Esterification Separation Method | Preferential esterification of isophthalic acid with C7-C9 primary alkanols (2-ethylhexanol, 1-octanol) at 80-150°C yields residues containing 89.5-96.1% terephthalic acid after 12-21 hours reflux. |
| EASTMAN KODAK COMPANY | Continuous terephthalic acid production plants requiring efficient removal of isophthalic acid byproduct to maintain PET-grade purity specifications. | Isophthalic Acid Side-Stream Crystallization Process | Cooling 15-75% of hot acetic acid production stream to <50°C precipitates isophthalic acid, rendering total stream unsaturated and enabling recovery of pure terephthalic acid substantially free of isophthalic acid contamination. |