NOV 17, 202650 MINS READ
Terephthalic Acid (1,4-benzenedicarboxylic acid, C₈H₆O₄) functions as the rigid aromatic segment in PET's macromolecular architecture, imparting dimensional stability, thermal resistance, and barrier properties essential for packaging and textile applications 13. In the direct esterification route (TPA process), terephthalic acid reacts with ethylene glycol (EG) at 250–290°C under catalysis by antimony trioxide (Sb₂O₃, 100–300 ppm) or titanium-based systems, forming bis(2-hydroxyethyl) terephthalate (BHET) as the intermediate oligomer 13. The stoichiometric molar ratio of EG:TPA typically ranges from 1.2:1 to 2.0:1 to drive esterification equilibrium and compensate for EG volatilization 13. Subsequent polycondensation under high vacuum (<1 Torr) and elevated temperature (270–285°C) removes excess EG, yielding PET with intrinsic viscosity (IV) of 0.60–0.75 dL/g for bottle-grade resin and 0.85–1.2 dL/g for industrial fiber applications 4,5.
The purity of terephthalic acid critically influences PET molecular weight distribution and optical properties. Fiber-grade TPA specifications mandate:
Impurities such as 4-CBA terminate polymer chain growth by forming stable end groups, preventing achievement of target molecular weights necessary for mechanical strength in bottles (typically requiring IV >0.70 dL/g) 16. Commercial TPA production via p-xylene oxidation (Mid-Century/Amoco process) generates crude TPA with 4000–10,000 ppm 4-CBA, necessitating catalytic hydrogenation purification steps that add 15–20% to production costs 16,18.
Alkaline hydrolysis employing sodium hydroxide (NaOH) or potassium hydroxide (KOH) represents the most industrially mature chemical recycling route, achieving >98% TPA recovery as water-soluble alkali metal salts 3,8. The process operates through nucleophilic attack of hydroxide ions on PET's ester linkages:
(C₁₀H₈O₄)ₙ + 2n NaOH → n Na₂(C₈H₄O₄) + n C₂H₆O₂
In a representative protocol 3, comminuted PET waste reacts with 10–15 wt% aqueous NaOH at 200–240°C and 15–25 bar for 2–4 hours, yielding disodium terephthalate (Na₂TPA) in solution and ethylene glycol as co-product. Key process parameters include:
Following depolymerization, the aqueous Na₂TPA solution undergoes filtration to remove insoluble contaminants (polyolefin labels, adhesives, pigments), then acidification with sulfuric acid or hydrochloric acid to pH 1.5–2.5 precipitates TPA crystals 3,8. The precipitate is washed with deionized water (3–5 cycles) to remove residual sodium salts, achieving final TPA purity >99.5% with 4-CBA <15 ppm 3. Ammonia stripping of the post-acidification liquor recovers NH₃ for recycle when ammonium hydroxide is used as the alkaline reagent, with ethylene glycol separated by vacuum distillation (bp 197°C at 1 atm) 3,9.
A continuous alkaline hydrolysis variant 4,5 employs twin-screw extruders as reactors, processing high-IV PET (0.75–1.2 dL/g) that resists batch depolymerization. Molten PET at 260–280°C contacts a slurry of NaOH (20–30 wt%), sodium carbonate (Na₂CO₃, 5–10 wt% as buffer), and ethylene glycol (10–15 wt%) injected mid-barrel 4,5. Residence time of 8–15 minutes at 250–270°C achieves >95% conversion to Na₂TPA, with the carbonate buffering pH to prevent localized alkali depletion that slows hydrolysis kinetics 4. This approach eliminates organic solvents and operates at near-ambient pressure (1.5–3 bar gauge), reducing capital and operating costs by 30–40% versus batch autoclaves 5.
Glycolysis-hydrolysis sequences offer energy-efficient TPA recovery by conducting initial depolymerization at atmospheric pressure 6,12,14. In the glycolysis step, PET reacts with ethylene glycol (EG:PET molar ratio 4:1 to 8:1) at 180–230°C in the presence of zinc acetate catalyst (0.5–2.0 wt% relative to PET) for 2–6 hours, yielding bis(2-hydroxyethyl) terephthalate (BHET) and oligomeric esters 6,12:
(C₁₀H₈O₄)ₙ + n C₂H₆O₂ → n C₁₂H₁₄O₆ (BHET)
Zinc acetate (Zn(CH₃COO)₂) functions as a transesterification catalyst, coordinating to carbonyl oxygens and activating ester bonds for nucleophilic attack by EG hydroxyl groups 6,12. Optimal glycolysis conditions reported include:
The glycolysis product—a viscous mixture of BHET, oligomers (DP 2–5), and excess EG—undergoes hydrolysis by addition of 15–25 wt% aqueous NaOH or KOH at 60–100°C for 1–3 hours, cleaving ester bonds to form alkali metal terephthalate salts 6,12,14. Optional decolorization with activated carbon (2–5 wt%, 500–1200 m²/g BET surface area) at 80–90°C for 30–60 minutes removes colored impurities (oligomeric ethers, oxidation products), reducing b*-value from 8–12 to <3 6. Filtration through 5–10 μm cartridge filters removes carbon fines, and acidification with H₂SO₄ to pH 2.0–2.5 precipitates TPA with purity >99.2%, 4-CBA <20 ppm, and RFCVIS <2000 6,12,14.
This two-stage approach achieves overall TPA yields of 92–96% (mass basis relative to PET input) while operating entirely at <2 bar pressure, reducing equipment costs by 50–60% compared to high-pressure hydrolysis autoclaves 12,14. Ethylene glycol recovered by distillation (98.5% purity after single-stage vacuum distillation at 80°C, 50 mbar) can be recycled to glycolysis or sold as polymer-grade EG 6,12.
Neutral hydrolysis in subcritical or supercritical water (T >374°C, P >221 bar) enables catalyst-free PET depolymerization, eliminating alkali consumption and neutralization waste streams 10,17. At 300–350°C and 150–250 bar, water's ionic product (Kw) increases 1000-fold, providing sufficient H⁺ and OH⁻ for autocatalytic ester cleavage 17. A continuous neutral hydrolysis process 10 operates at 320°C and 180 bar with 15-minute residence time, achieving 98% PET conversion to TPA and EG. Decolorizing carbon (1–3 wt%) added in-situ adsorbs colored oligomers, and hot filtration (310–320°C) through sintered metal filters (10 μm pore size) removes carbon and insoluble residues before cooling-induced TPA crystallization 10.
Supercritical water oxidation (SCWO) at 400–450°C and 250–300 bar with O₂ co-feed (0.5–2 mol O₂ per mol PET) mineralizes organic contaminants (dyes, adhesives, polyolefins) to CO₂ while preserving TPA, yielding ultra-pure product (>99.8% TPA, metals <5 ppm total) suitable for pharmaceutical intermediates 17. However, SCWO's high energy demand (8–12 MJ/kg PET processed) and specialized high-pressure equipment limit economic viability to high-value applications or heavily contaminated feedstocks 17.
Microwave irradiation (2.45 GHz, 600–1200 W) accelerates PET depolymerization by selective dielectric heating of polar reactants (water, alcohols, ionic catalysts), achieving reaction temperatures in 5–10 minutes versus 30–60 minutes for conventional heating 2. A microwave-assisted alkaline hydrolysis protocol 2 treats PET flakes with 12 wt% NaOH solution at 200°C for 20 minutes under microwave irradiation, yielding 96% TPA recovery. Post-depolymerization, the mixture is diluted with water (1:3 v/v), and the solid phase (Na₂TPA, residual PET, contaminants) is separated by centrifugation (3000 rpm, 10 minutes) 2. The aqueous supernatant undergoes liquid-liquid extraction with water-immiscible organic solvent (e.g., ethyl acetate, 1:1 v/v) to remove dissolved organics (oligomers, plasticizers), followed by contact with macroporous resin sorbent (Amberlite XAD-16, 50 g/L) for 2 hours to adsorb residual colored species 2. After sorbent separation by filtration, acidification with HCl to pH 2.0 precipitates TPA (purity 99.1%, yield 94%) 2.
Microwave processing reduces energy consumption by 40–50% versus conventional heating due to volumetric heating and elimination of thermal lag, but scalability challenges (limited penetration depth, non-uniform field distribution in large reactors) currently restrict application to pilot scale (<100 kg/h throughput) 2.
Crude TPA recovered from PET waste typically contains 200–800 ppm 4-CBA, exceeding fiber-grade limits (<25 ppm) by 10–30-fold 1,16. Catalytic hydrogenation converts 4-CBA to p-toluic acid (which is more easily removed by recrystallization) or further to p-xylene 1:
4-CBA + H₂ → p-toluic acid + H₂O (primary pathway)
p-toluic acid + H₂ → p-xylene + CO₂ + H₂O (over-reduction)
A representative hydrogenation process 1 dissolves crude TPA (4-CBA 500 ppm, b*-value 8.5) in water at 250–280°C and 40–60 bar, then introduces H₂ (10–30 bar partial pressure) over supported palladium catalyst (5 wt% Pd/C, 0.1–0.5 wt% relative to TPA) for 4–8 hours. Hydrogenation reduces 4-CBA to <15 ppm and b*-value to <2.0, while RFCVIS decreases from 5000–8000 to <2000 due to saturation of conjugated chromophores 1. The catalyst is recovered by filtration and regenerated by oxidative treatment (air, 300°C, 2 hours) to restore activity 1.
Alternative non-noble metal catalysts—including Raney nickel and copper chromite—offer lower cost but require higher temperatures (280–320°C) and longer reaction times (12–24 hours), with increased risk of TPA decarboxylation to benzoic acid (yield loss 2–5%) 1. Palladium on carbon remains the industrial standard due to superior selectivity and 500–1000 hour catalyst lifetime before regeneration 1.
Recrystallization from water or aqueous acetic acid exploits TPA's low solubility at ambient temperature (0.002 g/100 mL water at 25°C) versus high solubility at elevated temperature (2.0 g/100 mL at 300°C) 1,10. Crude TPA is dissolved in water at 280–300°C under pressure (50–80 bar to maintain liquid phase), then cooled to 80–100°C to crystallize purified TPA while retaining p-toluic acid, metal salts, and colored oligomers
| Org | Application Scenarios | Product/Project | Technical Outcomes |
|---|---|---|---|
| AMOCO CORPORATION | Chemical recycling of post-consumer PET bottles, films, and manufacturing residues to produce high-purity terephthalic acid for polyester fiber and bottle-grade resin production. | Fiber-Grade Terephthalic Acid Recovery Process | Achieves b*-value less than 2.00, RFCVIS below 2500, metals content under 100 ppmw through hydrogenation of crude TPA in aqueous solution for up to 8 hours, meeting fiber-grade specifications from waste PET. |
| JBPV s.r.o. | Pilot-scale chemical recycling facilities processing waste PET packaging requiring rapid depolymerization with reduced energy consumption and enhanced process kinetics. | Microwave-Assisted PET Depolymerization System | Reduces reaction time to 20 minutes at 200°C using microwave irradiation (2.45 GHz), achieving 96% TPA recovery with 40-50% energy savings versus conventional heating through selective dielectric heating. |
| BOARD OF CONTROL OF MICHIGAN TECHNOLOGICAL UNIVERSITY | Closed-loop PET recycling systems for beverage container waste requiring co-recovery of both terephthalic acid and ethylene glycol monomers with reagent recycling capabilities. | Ammonium Hydroxide-Based TPA Recovery Technology | Recovers TPA via formation of water-soluble diammonium terephthalate at elevated temperature and pressure, with ammonia recycling through lime treatment and stripping, plus ethylene glycol recovery by distillation. |
| SHPP Global Technologies B.V. | Cost-effective PET chemical recycling plants processing mixed post-consumer waste requiring simplified reactor design and operation at near-atmospheric pressure for fiber-grade terephthalic acid production. | Ambient-Pressure Glycolysis-Hydrolysis Process | Operates at 90-200 kPa pressure using zinc acetate catalyst (0.8-1.5 wt%) for glycolysis followed by alkaline hydrolysis, achieving 92-96% TPA yield with purity >99.2% and 4-CBA <20 ppm without high-pressure equipment. |
| EASTMAN CHEMICAL COMPANY | High-throughput continuous PET recycling facilities requiring catalyst-free depolymerization and simultaneous recovery of high-purity terephthalic acid and ethylene glycol for direct repolymerization applications. | Supercritical Water Hydrolysis System | Achieves 98% PET conversion to polymer-grade TPA and ethylene glycol through neutral hydrolysis at 320°C and 180 bar with 15-minute residence time, eliminating alkali consumption and neutralization waste streams. |