Graphical user interface for broadband multi-channel acquisition and processing system based on computer

Abstract

1. The name of the product of this design: Graphical user interface of a broadband multi-channel acquisition and processing system for a computer. 2. Purpose of this design product: used to display device information and execute applications. 3. The key design point of this design product lies in the content of the graphical user interface. 4. The picture or photo that best illustrates the key points of the design: Main view of Design 1. 5. The computer is of conventional design, and the rear view, left view, right view, top view, bottom view and stereoscopic view are omitted. 6. Designate Design 1 as the base design. 7.Purpose of graphical user interface: used for broadband multi-channel acquisition and processing. 8. The change process of the graphical user interface: The main view of Design 1 is the initial page. When the user clicks the [Waveform] drop-down box before [Start Detection] at the bottom of the main view of Design 1, the Design 1 change state diagram 1 is entered. The user can select a waveform in the [Waveform Selection] box in the Design 1 change state diagram 1; when the user enters data in the [Bandwidth], [Start Frequency], and [End Frequency] boxes at the top of the Design 1 change state diagram 1, and clicks [Start Detection] at the bottom of the page, the detection starts. After the result is detected, the Design 1 change state diagram 2 is entered to view the detection status and detection result data; when the user clicks the [Auto Control] area at the bottom of the Design 1 Change State Diagram 2 to start the detection, the Design 1 Change State Diagram 3 is entered. The Design 1 Change State Diagram 3 is used to view the control status and detection status as well as the collected data stored locally. The main view of Design 2 is the initial page. When the user clicks the box on the right side of [Working Mode] in the upper part of the main view of Design 2, the user enters the Design 2 Change State Diagram 1; when the user enters data in the boxes of [Start Frequency] and [End Frequency] in the upper part of Design 2 Change State Diagram 1, and switches [Real-time Control] to [Panoramic Sweep] in [Working Mode], the user enters [Sweep Mode] and enters Design 2 Change State Diagram 2. At this time, the system starts to sweep the frequency; when the user is scanning the frequency to find the target signal, the user operates the right button of the mouse, drags to zoom in and out to find the signal. When the signal is found, the user uses the mouse to select the signal and enters Design 2 Change State Diagram 3; the user in Design 2 Change State Diagram 3 Double-click the signal frequency band mask to automatically switch the working mode from [Sweep Mode] to [Real-time Control], and the interface will enter Design 2 Change State Diagram 4; after the user finds the target signal frequency band in Design 2 Change State Diagram 4, operate the mouse to select the signal, the signal will be automatically previewed to the [Narrowband Preview] in the lower right corner of the figure, and enter Design 2 Change State Diagram 5, where the user can view the spectrum details of the signal; when the user clicks on the bit map, constellation map, audio map, text, etc. in the narrowband preview in Design 2 Change State Diagram 5 to analyze whether the signal is the target signal, after confirming that it is, click [Control] to add the signal to the control list and collect the target signal, and enter Design 2 Change State Diagram 6. The Design 3 main view is the initial page. When the user selects the task button on the top right of the diagram in the Design 3 main view, it enters the Design 3 change state diagram 1. The user can click the task to be set on this page, select its task mode and parameters related to the detection module, and can set the execution duration and fixed start time of each task. Click [Apply] to save the task and complete the new task. Multiple tasks can be created; when the user selects a task in the Design 3 change state diagram 1 and clicks [Start], the device interface enters the Design 3 change state diagram 2, and the system starts the task; after a certain period of time, the device interface automatically enters the Design 3 change state diagram 3, and the user can view the results on this page.

Images