Charcoal gasifier

Abstract

OCR 07AP A charcoal gasification machine consists of two main parts: the kiln body and the combustion chamber. The stove body is made of square steel tubing, coated with heat-resistant and rust-proof paint. The bottom is fitted with four wheels. The combustion chamber walls are insulated with galvanized steel sheets and calcium silicate insulation. (Calcium silicate) is attached to the furnace frame, with upper corner locks made of angle iron and the roof. It is attached to the stove body. A lid for ignition is installed at the back, and there are ventilation vents on the sides. On the right side, there is a waterproof cover, gas supply connection, and a removable hand crank for the screw conveyor. Yes, it has an ash collection compartment at the bottom and a hole at the top for a charcoal refill pipe, with a lid that opens and closes inside. The combustion chamber contains a charcoal storage chamber and a combustion tube to insert the ignition tube for igniting the fire. The lower part of the combustion tube... The conveyor is welded to a steel screw conveyor for coal ash, complete with a rotating central shaft and a cover. An on / off switch for maintenance and cleaning is included. Next to it is a base for mounting the control cabinet. The gas pipeline, made of thin metal tubes, is used to transport gas and dissipate heat around the coal storage room. It connects to the blower, with a U-shaped sediment trap with a cover before reaching the blower.

Claims

OCR 07AP 1. A charcoal gasification device consisting of two main parts: the furnace (1) and the combustion chamber (19). The stove (1) will have a structure made of square steel tubing with a width of 3.5 centimeters and a length of 3.5 centimeters. and 0.16 cm high, painted with anti-rust primer and then painted with high heat resistant paint. The bottom of the stove (1) has wheels installed. 4 wheels, with all sides of the stove (1) walls made of the same material with special characteristics, covering the outside and inside. With a folded zinc sheet insulated with calcium silicate, attached to the stove frame with locking clips. The corner (7) is made of angle iron. The stove body (1) will have handles (5) made of stainless steel pipes for moving the stove to installation. On all four sides of the stove, the side of the stove body (1) has a connection box (4) for connecting to the gas line with a waterproof cover and Waterproof stainless steel metal box (6) for installing the operating control and temperature display system. And time, there is a hand crank (7) for conveying ash which helps the charcoal to continuously enter the combustion chamber (19) by the ash. It is then conveyed to the ash receiving channel (10). The top (2) is covered with a stainless steel plate that is 0.12 centimeters thick. Drill a hole with a diameter of 14 centimeters to insert a charcoal filling tube, which has a lid that opens and closes for filling charcoal (8), with the lid having a spring. There are 4 locking plates (9) on one side and a cover (11) on the other side, which is a 0.12 mm thick stainless steel plate. Centimeter cut and folded into shape for a ignition opening to start work, with 2 hinges made of stainless steel (12) and On the side there will be a ventilation grille (13) with a width of 20 centimeters and a length of 35 centimeters, made of aluminum 2. Charcoal gasification equipment under claim 1, where the gasification room (19) will have a charcoal storage room (16). It has a width of 45 centimeters, a length of 45 centimeters, a depth of 21 centimeters, and a thickness of 0.2 centimeters. Complete with a steel plate on top (15) with a width of 45 centimeters, a length of 45 centimeters, and a thickness 0.2 centimeters, a hole is drilled to fit into the charcoal filling pipe (14), and the bottom part is welded to a square cone (17) made of thick steel. 0.2 centimeters and the cone end is attached to the combustion pipe (18) with a diameter of 14 centimeters and a thickness 0.3 centimeters. On the side of the combustion tube (18), a hole with a diameter of 10 centimeters is drilled to insert the tube. Flame point (24) with a diameter of 0.9 centimeters and a length of 6.5 centimeters. Inside wall of charcoal storage room (16). The square cone (17) and combustion tube (18) are enclosed with fire-resistant insulation, while the outer walls are insulated with thermal insulation. The calcium silicate at the bottom of the combustion tube (18) is welded to a rectangular metal plate (25). 17 centimeters wide, 19 centimeters long, 2 pieces, separated by thermal insulation plates. Made of refractory ceramic fiber plates (26) fastened with 4 screws, the ash conveyor screw assembly (22) has a width of 34 centimeters, depth 15 centimeters, height 19 centimeters, inside there are screw blades (30) with diameter The center is 12.5 centimeters, made of 0.1 centimeter thick steel plate, with a central axis (29) with a diameter of 2.5 centimeters, length 50 centimeters, made of round iron, can rotate and has an open-close lid (27) for Maintenance and cleaning and the bottom has an ash collection compartment (10) with a width of 17 centimeters, height 5 centimeters, 8 centimeters deep. The side of the screw conveyor assembly has a base (28) to support the control cabinet (6). For gas pipeline (20), the pipe has a diameter of 1.25 centimeters and is made of thin metal pipe connected to The coal storage room is used for gas conveyance and cooling, with pipes circling the room three times before reaching the blower. There will be a U-shaped sediment trap with an open-close lid (21) with a pipe diameter of 1.25 centimeters, so it is connected to Blower (23) and connected to the gas line for use.

Images