Eureka on the web
When you want the answer in the next five minutes.
The agent works the prompt against patents and technical literature, citing every source.
Run your analysis now →A patent landscape review of magnesium die casting hot cracking control: who holds the ranked leaders' filings, how the technology mix breaks down across alloy and casting classes, and where filing activity is heading th
Filing growth = 2021 (1 records) → 2024 (2); 2024 is the last year we treat as complete. Top-5 share = the 5 largest assignees ÷ all 48 records in scope (CR5), not the ranked leaders only.
Hot cracking — also called hot tearing or solidification cracking — is a persistent defect mode in high-pressure die casting of magnesium alloys, where shrinkage stresses during solidification open cracks along grain boundaries before the casting fully cools. This landscape tracks patent filings that combine magnesium die casting with hot cracking, hot tearing or solidification crack control, covering 48 published records from 2015 through the 2026-08-31 data cut-off. Publication lags filing by roughly 18 months, so the most recent filing years are undercounted and should be read as a floor, not a ceiling.
The scope spans alloy chemistry adjustments, casting process parameters, and a handful of measurement and data-processing approaches applied to the casting cycle. Records are grouped by patent family so continuation filings and multi-jurisdiction copies of the same invention are not double-counted in the assignee ranking.
The following two views cover the same 48 records from different angles: when the filings happened, and what technical ground each filing claims.
Filing activity was flat to zero through much of 2017 before building toward a peak of 9 records in 2023. The 2021-to-2024 span shows filings doubling from 1 to 2 (+100%), a growth signal worth watching even though the absolute counts stay small. Years after 2024 will fill in further as publication catches up with filing.
Publication lags filing by roughly 18 months, so 2025 onwards are still filling in. Growth rates on this page therefore end at 2024; running them to the last bar would understate the field.
C22C (alloys) appears in 83.3% of the 48 records, making alloy composition the densest claim territory by a wide margin. B22D (metal casting) follows at 43.8%, with C22F (non-ferrous metal treatment) at 14.6% and B22F (powder metallurgy) at 8.3%. The remaining classes — G06F, B21D, C25D and G01F — each sit at or near 2%, marking narrow, largely unclaimed adjacencies such as data processing and flow measurement applied to the casting cycle.
Shares are the percentage of the 48 records in scope. A patent can carry several IPC classes, so the shares add up to more than 100%.
This page is one run against one query. Ask Eureka your own question about magnesium die casting hot cracking control patent landscape and every answer comes back with the patent numbers behind it.
Try EurekaMethods and systems for high pressure die casting with metal alloys of low silicon content are described. Metal alloys can be modified with nanoparticles to achieve high fluidity and hot cracking resistance to be compatible with high pressure die casting. The die cast metal parts have high strength, high ductility, and high thermal and electrical conductivity. The die cast metal parts can be anodized with different colors.Filed by Metali LLC, published 2023-11-30 — illustrates the nanoparticle-modification route to hot cracking resistance that sits alongside the more conventional alloy-chemistry filings in this landscape.


| # | Publication no. | Patent title | Citations |
|---|---|---|---|
| 1 | US6139651A | Magnesium alloy for high temperature applications | 67 |
| 2 | US20030000608A1 | Magnesium alloy and heat treatment method thereof | 38 |
| 3 | CN104923761A | 用于可铸造性能评价的压铸模具 | 14 |
| 4 | US20010037868A1 | Hot chamber die casting of semisolids | 12 |
| 5 | US20160271688A1 | Low cost high ductility cast aluminum alloy | 9 |
| 6 | US20020084053A1 | Hot chamber die casting of semisolids | 8 |
| 7 | US4543234A | Oxidation resistant magnesium alloy | 8 |
| 8 | CN113710826A | 用于汽车结构应用的非热处理型的铸造合金 | 7 |
| 9 | JP1998324941A | Magnesium alloy having excellent high temperature characteristic and die castability | 7 |
| 10 | GB2340129A | A magnesium alloy | 6 |
Citation counts reflect an older, frequently-referenced core of alloy and casting patents; they favour early filings and should be read as a signal of influence rather than current relevance.
Patent titles are shown in the language they were filed in, not translated, so that each record stays verifiable against the original filing — a translated title will not match in Eureka or in any national register. Each row carries its publication number; clicking a row searches Eureka by that number.
When you want the answer in the next five minutes.
The agent works the prompt against patents and technical literature, citing every source.
Run your analysis now →When it has to run inside your own pipeline.
Patent search, landscape analysis and assignee resolution as MCP tools. Drop them into any agent framework, or call REST directly.
Browse MCP servers →Three patterns stand out once the ranking, the trend and the technology split are read together.
Three-quarters of all records in scope trace to five assignees, and the top 10 combined reach 97.9%. A new entrant is filing directly alongside a small group that already holds most of the occupied claim space, not into an open field.
Alloy composition claims (C22C) cover the large majority of records, while metal-casting process claims (B22D) cover under half. That gap suggests process-side mitigation — die design, gate geometry, thermal control — carries relatively more open claim space than a new alloy composition would.
The trend line was flat for much of the mid-2010s before building to a peak of 9 records in 2023. The 2021-to-2024 doubling, while on small absolute numbers, lines up with that peak and points to filing activity picking back up rather than winding down.
Digital data processing (G06F), sheet-metal working (B21D), electroplating (C25D) and flow measurement (G01F) each appear in only one or two of the 48 records. These are the narrowest slices of the landscape and the most likely places to find an unclaimed angle, such as sensor-driven process control tied to hot-cracking prediction.
Eureka can read the same corpus for gaps instead of for coverage: under-claimed branches adjacent to magnesium die casting hot cracking control patent landscape, with the prior art for and against each one.
The dataset points to specific next questions rather than a single conclusion.
With five assignees holding 75.0% of records, a freedom-to-operate review should start with their specific claims before any new alloy or process design is finalised.
Explore assignee claims in EurekaThe 43.8% share for B22D against 83.3% for C22C suggests casting-process mitigation is comparatively underclaimed; a targeted search can confirm how open specific process parameters are.
Run a process-claim search in EurekaBecause publication lags filing by about 18 months, records from 2025 onward will keep arriving; revisiting this search periodically will sharpen the recent-trend picture.
Set up monitoring in EurekaHot cracking, also called hot tearing or solidification cracking, happens when shrinkage stresses build up in a magnesium casting before it has fully solidified, opening cracks along weaker grain boundaries. It matters for patent strategy because fixes fall into two broad camps — changing the alloy chemistry to make the metal more resistant, or changing the casting process to reduce the stress that causes cracking in the first place. This dataset shows alloy-chemistry claims (C22C, 83.3% of 48 records) are far more common than process claims (B22D, 43.8%), so the two camps are not equally crowded.
The assignee ranking covers 31 companies drawn from all 48 records in scope, with the leader holding 10 records. The top 5 assignees combined account for 75.0% of all records, and the top 10 combined reach 97.9%, meaning the field is heavily concentrated rather than evenly spread. Anyone entering this space should expect to be filing directly alongside a small group of already-active holders rather than into open territory.
Filing activity built up from essentially nothing in the mid-2010s to a peak of 9 records in 2023, and the 2021-to-2024 span shows a doubling from 1 to 2 records (+100%). These are small absolute numbers for a narrow technical niche, so short-term swings should not be over-read, but the direction through the most recently complete year is upward, not downward. Years from 2025 onward will keep filling in as publication catches up with filing, typically on an 18-month lag.
The narrowest slices of the landscape are digital data processing (G06F), sheet-metal working (B21D), electroplating (C25D) and flow measurement (G01F), each appearing in only one or two of the 48 records. That pattern suggests sensor-driven or data-based approaches to predicting or controlling hot cracking during the casting cycle are comparatively open compared with alloy composition, which is claimed in 83.3% of records. A first filing in one of these adjacent branches would face far less prior art density than a new alloy composition claim.
Start by reviewing the specific claims of the top-ranked assignees, since they together hold 75.0% of the 48 records and are the most likely source of a blocking claim in alloy chemistry. Then compare the target invention against the technology split: a new alloy composition competes in the densest 83.3% territory, while a process-control or measurement-based approach sits in comparatively lighter-claimed ground. Finally, treat the most-cited older patents as background art to design around rather than as evidence the field itself is exhausted, since citation counts favour earlier filings by nature.
Go past this page: query the whole magnesium die casting hot cracking control patent landscape corpus yourself, in your own scope.
Every answer comes back with patent numbers you can open.
Disclaimer. This page is generated from Patsnap Eureka data drawn from a limited snapshot of global patent and scientific-literature records, and is provided for general information and reference only.
Patent data carries inherent limitations: recent filings (typically the most recent 18–24 months) are under-counted due to standard publication lag; counts may be reported at either a patent-family or a patent-record basis and are not always directly comparable; classification, applicant-name, and citation data may contain errors, duplicates, or omissions; and the underlying search query defines and constrains the scope shown. As a result, the analysis may be incomplete or inaccurate and may not reflect the full technology landscape.
Nothing on this page constitutes an exhaustive prior-art, novelty, freedom-to-operate, or validity search, nor does it constitute legal, financial, investment, or professional advice, and it should not be relied upon as such. Any patent, commercial, or strategic decision should be verified independently and reviewed with qualified patent, legal, and domain professionals. Patsnap makes no warranties, express or implied, as to the accuracy, completeness, or fitness for any particular purpose of the information presented.
Machine translation. Assignee and organisation names originally recorded in Chinese, Japanese or Korean have been rendered into English by an AI translation step so that the tables stay readable. These renderings are best-effort and may not match a company's registered English name; the original name is what the underlying patent record carries, and it is what any Eureka query launched from this page uses.
Help us improve
Something wrong, out of date, or missing on this page? Tell us and it goes straight to the team that maintains it.
This page