← Back to the page you were readingYou opened this term from another page.
R&D · R&D methodsTask: Plan R&D

Failure mode and effects analysis (FMEA)

Also called DFMEA, PFMEA, FMECA

Published by Patsnap Team Updated 3 sources
DefinitionFMEA

Failure mode and effects analysis (FMEA), as described in IEC's public summary of IEC 60812:2018, systematically identifies failure modes and their effects on an item or process1.

AppliesIEC's 2018 summary: hardware, software, processes and interfaces1
Also seeSAE's 2026 J1739 catalogue: DFMEA, supplemental FMEA-MSR and PFMEA2
Used byNASA's undated JPL practice, accessed in 2026: system failure analysis3
Not to confuse withIEC's 2018 summary identifies FMECA as the criticality analysis variant1
01

Scope and criticality

IEC's public summary of IEC 60812:2018 includes processes involving human action within the document's scope1.

IEC's 2018 summary calls the analysis FMECA when criticality ranking includes at least the severity of consequences, often with other importance measures1.

IEC's 2018 summary says that the edition added alternative ways to calculate risk priority numbers (RPN)1.

02

DFMEA, FMEA-MSR and PFMEA

NameScope stated in the public catalogue
DFMEASAE's 2026 J1739 catalogue describes potential failure mode and effects analysis in design2.
FMEA-MSRSAE's 2026 J1739 catalogue lists supplemental FMEA-MSR within its scope2.
PFMEASAE's 2026 J1739 catalogue describes potential failure mode and effects analysis in manufacturing and assembly processes2.
03

An official FMECA practice

NASA's undated PD-AP-1307 practice, accessed in 2026, describes a systematic study from the piece part or circuit functional block through assemblies and subsystems3.

NASA's undated practice, accessed in 2026, records each potential assembly failure with its assembly, subsystem and system effects, and requires formal project acceptance of identified residual system risk3.

04

Questions people ask

Patsnap EurekaEureka R&D

Plan R&D

R&D AI Agent

An AI technical research assistant for R&D and engineering problems, with every answer traced to its sources.

Ask Eureka Engineering
What is the difference between FMEA and FMECA?

IEC's 2018 public summary distinguishes FMECA by criticality ranking that includes at least consequence severity1.

Does FMEA apply only to hardware?

No; IEC's 2018 summary also includes software, processes involving human action, and interfaces1.

What do DFMEA and PFMEA refer to?

SAE's 2026 J1739 catalogue describes DFMEA for design and PFMEA for manufacturing and assembly processes2.

05

How it connects

PublishedPatsnap Team
Updated 17 November 2026
Sources
  1. IEC 60812:2018: Failure modes and effects analysis (FMEA and FMECA). IEC · standard summary page · 2018. Accessed 17 November 2026.
  2. J1739_202605: Potential Failure Mode and Effects Analysis (FMEA) Including Design FMEA, Supplemental FMEA-MSR, and Process FMEA. SAE International · public catalogue page · 2026. Accessed 17 November 2026.
  3. Failure Modes, Effects and Criticality Analysis (FMECA), Practice No. PD-AP-1307. NASA Jet Propulsion Laboratory · preferred reliability practice · undated; accessed 2026. Accessed 17 November 2026.
Disclaimer

General information only. This page explains a term and is provided for general information and reference only. It is not legal advice and must not be relied upon as such. It does not create an attorney-client relationship.

Sources and accuracy. Statements on this page are intended to be either general background or linked to a source listed under Sources. The explanations summarize and simplify those sources and leave out detail. Where this page differs from a cited source or from the current official text of a law or standard, rely on that source or text.

Rules vary and change. The law, standards and practice described here differ between jurisdictions and change through legislation, court decisions and revisions to official guidance and standards. This page was last checked against its sources on 17 November 2026 and may not reflect later changes. Check the current rules and official guidance in each jurisdiction that applies to you.

No FTO or validity opinion. Nothing on this page constitutes a freedom-to-operate, novelty, validity or infringement opinion. Any decision touching a live patent dispute should be verified independently and reviewed with qualified patent counsel.

Third-party names and marks. Party, attorney, judge and company names appear for identification only. Company names may be trademarks of their owners; their appearance does not, by itself, imply affiliation with or endorsement by Patsnap.

Corrections. If you believe a statement on this page is inaccurate or out of date, use “Share feedback” at the bottom of this page and tell us which statement and why.

R&D AI AgentAsk Eureka Engineering in Patsnap EurekaStart →

Help us improve

Something wrong, out of date, or missing on this page? Tell us and it goes straight to the team that maintains it.