Building Constructions TRIZ Cases

Vertical truss ledge supports below-grade floor trusses, resolving complexity trade-offs via monolithic pouring and composite materials.

Back bond means offset eccentric moments from bolts, reducing bending stress on the column shoe.

Recesses in the veneer tie insertion portion accommodate wall reinforcement, reducing assembly thickness while maintaining structural integrity.

Sidewall concave portions align installation holes, preventing misalignment that reduces connection stability in prefabricated structures.

A resilient silicone razor accessory features a rectangular channel for handle insertion and an extension equipped with a magnet to secure the device.

A structured light sensor creates a 3D map of spray foam surfaces to calculate depth and material yield.

Dry-anchored modular building elements integrate renewable energy storage to resolve scalability and environmental impact constraints.

A universal longitudinal support beam connects interchangeable shallow and steep pitch brackets to form a dual-slope bleacher structure.

Application tool with holding recesses deposits coating liquid directly onto flooring surfaces, eliminating masking sheet waste and setup time.

A thermally insulating component connects a cantilever slab to a building structure using a hardening material pressure element.

Vertically stacked rotatable plates enable precise post alignment while a flow-through riser element prevents water accumulation and wood rot.

A notched moment frame connector system uses segmented T-shaped plates to accommodate larger bolts and shear tabs without physical interference.

Inverted nozzle positioning relative to a stationary air injector reduces device complexity while maintaining reliable coating application.

Integrated gear linkages synchronize accordion wall panel rotation, expanding RV cabin space beyond modest slide-out limits.

Integrating a spring-operated take-up device with a ratcheting split nut eliminates slack and maintains constant restraint force during wood shrinkage.

Cam surfaces expand anchor jaws radially during rotation to prevent loosening in concrete slabs.

Dual-access closets integrated into hallway walls reduce physical steps required for laundry handling while minimizing wrinkles.

A drywall finishing tool sprays liquefied compound while floating the surface in one motion.

A cementitious sliding pad dissipates seismic energy through controlled friction against PTFE surfaces.

Segmented blades combine flexible polymer webs and rigid steel strips to level uneven plaster while reducing mess.

Integrated spring catch slides along frame to engage stop, reducing assembly costs by eliminating separate brackets.

An intermediate height support adjusts cover profile elevation, resolving thickness mismatches in floating floor installations.

A movable barrier slides along a track to define selectable storage unit sizes within a compact demonstrative model.

A templating device uses a sliding rod and protractors to measure beam dimensions.

A removable hose hub stores the distribution hose on a chute inlet, enabling quick setup and compact storage.

Protruding beam end blocks nest cogging inside structural assemblies, raising ceiling installation lines while maintaining flexural rigidity.

A Gert Haunch moment frame connection uses a bend plate to enhance structural ductility and flexibility.

Segmented form panels and support members enable simultaneous cement pouring of walls and floor, reducing construction duration from months to one day.

Segmented plates and angled screws transfer bending loads between wooden beams, eliminating diagonal braces while maintaining assembly ease.

A V-shaped blade tool retains a sponge to spread and remove finishing material on drywall corners.

A multi-functional connector block with buttress elements receives structural elements at transverse angles.

A modular connector assembly system transmits structural loads through integrated bracing elements and joist plates.

A groove fitting paired with a spring fitting uses a parallel screw channel to join components across varying heights.

Segmented splice plates isolate a sacrificial fuse element that dissipates seismic forces, preventing beam and column damage.

An adjustable screeding element slides along a base to set precise bed depths, resolving the trade-off between alignment accuracy and handling complexity.

Inclined flexible lips on a solid plinth profile seal wall-floor junctions, eliminating retention zones that promote microorganism growth.

Transverse carriage movement aligns centering rollers with profile grooves, enabling variable angle installation without manual adjustment.

Segmenting the attachment flange, drainage leg, and lip prevents rain screen compression while directing moisture through gravity-driven flow.

Dynamic shell structures enable high-density housing by providing natural light and ventilation through reconfigurable openings.

A continuous process for making fire-resistant foam insulation panels with metal facing sheets.

One-piece insulating body with closed profiles and transverse reinforcing bars reduces manufacturing effort while maintaining force transmission.

Segmentation and dynamics principles resolve the contradiction between structural stability and portability in this reconfigurable training facility.

A concealed joist tie with a sloped center flange connects structural members using orthogonally bent fastening flanges.

A reusable epoxy applicator combines a rigid handle with a flexible portion embedded in a permanently lubricating film to reduce friction.

A tape dispenser with a rotatable hub and pivotable handle enables self-aligning tape dispensing.

Radial trusses distribute downward force to conform the float pan shape, resolving centering issues and surface grooves from direct rotor attachment.

Suction cup auxiliary tool secures window reveals without drilling, ensuring perpendicular alignment and reducing installation time.

Elongated moulding element features lateral adhesive bands and oblong holes for mechanical fasteners to secure flooring materials.

A toggle lever clamping device with adjustable screw connections aligns floorboards by maintaining a fixed joint distance.

An asymmetric insulating body with a single-sided support bearing transmits shear forces through an anchored element.