Covering/Linings TRIZ Cases

Protrusion-based routing hubs secure floor-heating wires at varied bends while reducing wire damage, uneven heating, and thermal loss.

A layered glass-fibre wall sheath waterproofs and decorates moist-room surfaces without removing existing coatings, reducing renovation steps.

Monotonic void-cell collapse gives cushioning a controlled spring rate, lower force transmission, and better durability under impact.

Embedded magnets, barrier layers, and parchment protect magnetic tiles from damage while enabling durable wall attachment and surface aesthetics.

A non-uniform spring tongue boosts panel locking force at the center while keeping edge sections flexible for easier assembly.

A dual-layer coating on glass non-woven fabric creates smooth printable surfaces while meeting strict fire protection needs for decorative coverings.

A phase-change aluminium collector and vertical elements improve wall heat transfer while avoiding plastering in dry wall installation.

Thermal shunts in floor, wall, or ceiling cladding bypass insulating layers to cut temperature drop and improve low-temperature hydronic efficiency.

Graphite-filled mortar and metal piping improve heat conduction and even temperature distribution in heating or cooling building boards.

Heat-activated lamination bonds backing and facing layers with low-solvent processing, improving recyclability, uniformity, and tile durability.

Mechanical engaging elements replace adhesive layers, preserving insulation pores for stronger sound absorption and thermal efficiency.

Partially open walls retain wood chips while letting pine aromas diffuse, enabling interchangeable shelf-mounted interior wall elements.

Micro-fine aqueous dispersion creates a smooth, low-permeability inorganic fiber mat for direct printing without excessive coating weight.

A polymer barrel with embedded metal bush and sleeve cuts stand-off bracket cost while preserving strength, durability, and safer glass mounting.

Identical wall and panel plates simplify cladding assembly, cut cost, and allow accurate horizontal positioning with limited lateral movement.

Recessed adhesive joins adjacent stone slabs within their thickness, preserving a continuous worktop surface while strengthening the joint.

A spring-loaded regulation bracket lets coating panels be height-adjusted while fixing screws stay in the panel's strongest section.

A 100% solids radiation-cured polyurethane top-layer cuts VOC emissions and blocks phthalate migration while improving PVC flooring wear and stain resistance.

A phase-change aluminium collector built into drywall removes plaster finishing while improving wall heating and cooling heat transfer.

An open insulating acoustic coating on radiant ceiling panel sidewalls cuts lateral heat loss and sound reflection without major retrofit changes.

Protrusion-based underlayment secures heating wires at controlled bends and spacing, improving floor heat uniformity and reducing wire damage.

A flexible membrane uses projections and flange overhangs to hold different heater cable sizes while decoupling flooring and distributing loads.

Adjustable modular floor panels use heat-radiation holes and lifting legs to improve heat transfer, comfort, maintenance, and deformation resistance.

Hinged brackets and angled panel slots enable tilt-free locking, simpler wall installation, and secure single-person mounting.

Heated laminate is bent, bonded, and clamped onto a shaped substrate edge to create custom countertop corners and cut-outs without a thick lip.

A compact bracket uses screw-and-cam adjustment to align coating panels vertically and horizontally within a narrow wall interspace.

A screw-and-slide wall mounting keeps lining panels vertically aligned and securely anchored without extra panel processing or a wider interspace.

A glass textile, open-pore foam, and discontinuous adhesive keep thin wall coatings paintable while preserving sound absorption.

Layered coatings on a support substrate create durable visual surfaces that resist moisture and wear while keeping production cost-effective.

By adding a set resistor at specific input voltages, this DC-DC converter suppresses pulse skip mode to stabilize battery power and prevent display flicker.

A softer continuous juncture lets an archway drywall trim strip curve to larger radii while preserving nose shape and compound adhesion.

A pivotable spring-loaded break-away bracket lets architectural mesh deflect under extreme wind loads while reducing tension and added weight.

A clench tool closes lock seam duct blanks in-line, eliminating manual hammering while reducing metal deformation and handling steps.

A bead clear coat plus a thick transparent edge film prevents corner cracks and pinholes while preserving glossy-matte contrast.

Wall-mounted casket display cabinets use lid-like doors, corner-cut shell sections, and visible info modules to raise display density without customer confusion.

A porous metal coating leaves vapor paths open while resisting oxidation, preserving low emissivity and breathability in building wraps.

Smooth curved mating grooves let split-tongue connectors lock flooring panels with circular saw fabrication, reducing tolerance sensitivity and easing board replacement.

Interlocking panels, starter pieces, and cleats create tile-like bathroom walls with faster installation, lower cost, and water-protected joints.

Segmented cover strips limit drying-induced surface tension, keeping tempering wall elements flatter and reducing adhesive use.

Dual rails, brackets, and faceplates mount office furniture without visible fasteners while simplifying installation and retaining wall tiles.

Progressively collapsing void cells absorb kinetic energy across load ranges while maintaining cushioning integrity and a controlled spring rate.

Using reinforced plaster that matches wall composition, this case prevents cracks at integrated wall and ceiling elements while keeping a seamless finish.

A ribbed triangular shower corner seat mounts with screws and supports immediate tiling, removing the overnight concrete curing delay.

A coated carrier laminated with a calendered plastic layer delivers plate products with high stiffness, dimensional stability, and lower capital cost.