Manual Lubrication TRIZ Cases

A reusable base-and-lid container collects waste oil, pours fresh oil through an integrated funnel, and seals for spill-safe transport.

A split air path and constriction nozzle let one pressure source deliver smooth, uniform grease spray on large component surfaces.

A bowl-shaped sealing ring with pressing plates and a spring lets one battery grease gun handle bulk, caterpillar, and sealed can cartridges.

A threaded adapter and open-end cartridge reduce grease spillage, prevent air locks, and show remaining grease during dispensing.

Direct lubricant channels coat chain links while a separate drain path captures overspray and runoff for cleaner, faster lubrication.

Servo motors, a pneumatic piston, and PLC control grease volume and rotation to coat lens holder threads uniformly with less waste.

A flow diverter and multi-stage discharge tube split one air source into grease ejection and atomization for smooth, uniform spraying.

A ball-valve connector combines grease refill and air release in one grease gun part, cutting complexity, cost, and leakage.

A press-fit holder aligns an injection portion and imaging unit side by side, enabling accurate insertion in narrow spaces without a guide jig.

A distal scraping surface clears mud and dust in narrow spaces before grease ejection, preventing contamination during maintenance.

A pressure-sensitive spool lets a dual-piston grease gun switch from high flow to high pressure to clear blockages with less user effort.

A movable-ball connector combines grease refill and gas release in one assembly, reducing leakage, splashing, and part count.

A bowl-shaped sealing ring resists deformation during sealed cartridge insertion, letting one grease gun handle bulk, simple, and can-type grease.

A single accessible zerk feeds branched grease conduits to multiple bearings, avoiding under-implement crawling and speeding lubrication.

Selective spray and direct grease injection improve lubrication coverage while a flowmeter and air vent help control grease use precisely.

A horizontal plunger-chamber layout equalizes inlet distance and improves oil injection consistency in an electric double-rod grease gun.

A collapsible inner reservoir and transparent outer body help grease guns dispense cleanly, simplify cartridge changes, and show remaining grease.

A valve core, elastic element, and overflow path stabilize grease-gun pressure near full injection to prevent over- or under-lubrication.

A spring-ball pressure regulating assembly stabilizes grease output by opening an overflow path when chamber pressure rises too high.

Side ejection ports on a closed-end supply pipe let grease be delivered across the insertion direction in narrow spaces.

A marked insertion jig guides a greasing pipe through the clutch housing to lubricate the fork-bearing contact without disassembly or inner-part contact.

Aligned projecting portions match partner thickness to lock the guide jig in place while maintaining accurate insertion guidance.

Wireless interchangeable control modules automate lubrication data capture and route distribution across fixed and portable dispensers.

A movable engaging member switches gear engagement positions so one electric grease gun can deliver different speed and pressure modes.

An integrated holder aligns an injection tube and imaging unit side by side to guide insertion in narrow spaces without a fixed guide jig.

A detachable guide seat lets operators swap bearings without reversing the pressing block, speeding grease filling and reducing labor.

A pre-dosed disposable lubricant set enables sterile post-sterilization lubrication of dynamic instrument holders without waste or contamination.

A porous plunger tip spreads lubricant evenly inside bores, protecting O-rings, reducing leak false positives, and limiting operator contact.

A threaded pin and sealed barrel inject lubricant through the steering cable to clear friction from debris buildup and restore smoother boat steering.

A pressure-sensitive spool switches this dual-piston grease gun to high-pressure mode to clear blocked fittings without external power.

An enclosed brush assembly with solvent inlet and drain channels cleans and lubricates drive chains more effectively with simpler maintenance.

A flexible housing and absorbent insert lubricate inner hinge parts without disassembly, preventing overspray and reducing mess.

A detachable guide seat and screw-driven press speed bearing grease filling by avoiding repeated reverse rotations after each fill.

A brush-fed spray attachment lubricates forestry winch drive chains through a housing opening, cutting service time without removing guards.

A dual-tube mount secures both the grease gun and hose on equipment, reducing tangling and keeping routine greasing tools ready.

A pre-dosed sterile reservoir and hollow tip lubricate dynamic instrument holders after sterilization while preventing lubricant loss and overdosing.

Rigid segmented supports and spring-biased locks hold a flexible grease tube at fixed angles for secure fitting contact in tight spaces.

A jig-guided greasing pipe reaches the clutch release contact point through the housing, cutting maintenance time and contamination risk.

A nested sleeve, jaw, and locking-ball layout enables secure grease nipple coupling under pressure while reducing leakage, hydraulic lock, and bulk.

A piston-actuated return port relieves line pressure and sends trapped grease back to the reservoir, reducing waste and stuck couplers.

Planetary gear reduction and a mesh filter help a battery grease gun maintain pressure, cut manual effort, and protect the pump from debris.

A threaded adapter seals the spark plug hole while delivering a fixed fogging oil dose, reducing contamination, leakage, and overfill risk.

A pivoting barrel and locking ring let the grease gun hold different operating angles, easing grease feeding in confined spaces.

A push-button retention fastener locks the grease reservoir without rotation, avoiding cross-threading, injury risk, and slow barrel changes.

A pressure-responsive relief valve switches grease discharge in two stages automatically, avoiding manual lever operation and overload damage.

Multiple capillary tubes matched to socket openings let one grease gun fill all ports at once, improving alignment and sealing reliability underwater.

A transparent oil injector uses a movable piston and flexible tube to dispense fluid while allowing direct visual observation of the stored amount.

Movable support and annular seal resolve sealing reliability versus cartridge compatibility contradictions.

A lubricator lid integrates a light diffuser to distribute optical signals from a central source to multiple outlets around the circumference.

A grease gun purge pin aligns an aperture to vent trapped air, resolving contamination risks from user finger contact during manual purging operations.