Pipe Supports TRIZ Cases

A hinged steel clamp with rubber gaskets secures telecom cables of different diameters by hand, avoiding tools and clamp separation.

A movable clip cartridge on a fastener gun pre-positions pipe clips for faster, more accurate support fastening with safer operation.

An elastic sleeve ring with snap-in rail projections secures cables, damps vibration, and enables tool-free mounting rail attachment.

A gravity-balanced pivoting arm keeps milking pipes correctly positioned, then stows clear of backing cows to cut manual handling and obstruction.

A manifold with alignment guides and a rotatable joint connects multiple material lines at once, cutting hose handling time and damage.

A curved roller path with varying channel width or depth improves IV flow precision, reduces slippage, and supports automated adjustment.

A hinged ratchet retainer secures tubes or wire bundles across multiple diameters while maintaining strong retention and slide resistance.

A ring-supported sleeve joint cuts conductive heat paths while sharing loads between inner and outer pipes during bending and straightening.

A two-part pipe support collar clamps and mounts aircraft fluid pipes in one step, cutting fasteners and preventing incorrect assembly.

Adjustable feet and legs let a flexible mounting module fit curved robot surfaces while keeping the upper substrate stable for integrated sensing and display.

Pivoting skid-mounted booms carry cables, hoses, and pipes across uneven pads, cutting utility setup time as drilling rigs move between wellbores.

A movable raised pipe bridge carries nutrient hoses over crops and roadways, maintaining field coverage while reducing crop damage and runoff.

Integrated longitudinal rails let nuts slide and self-center in heavy-duty strut channels, cutting extra parts, assembly time, and install hazards.

Shrouds and a mounting-bracket hood route and conceal trim tab actuator cables to prevent damage and avoid visible transom holes.

Low-friction pipe buffers and rollers reduce sagging wear against support plates, helping prevent leaks, breakage, and downtime.

A rail-and-connector frame lets plumbing lines enter from multiple sides and supports rotation or stacking for easier installation and access.

Axial insertion of rod supports lets this height-adjustable pipe holder fit around rebar and secure pipes in tight concrete mounting spaces.

Bent lock tabs stop washer and nut rotation in clevis pipe hangers, preventing vibration loosening and enabling visual inspection.

A dual-snapping flexible tie adapts to battery connector sizes, improves locking reliability, and maintains electrical isolation.

Controlled axial compression expands a flexible pipe seal against the bore while a hard stop prevents over-torque and eases assembly.

A spherical bearing and tie rod let aircraft pipework move with wing flex while separating axial and radial loads to reduce stress concentrations.

A clamp spring with stiffer ends and a more flexible center spreads radial load evenly on risers, preventing collapse and slip.

Oblique mating surfaces convert longitudinal load into radial clamping, securing flexible-pipe equipment with less complexity and pipe damage.

A graded plate with lower heat capacity at its inner side suppresses thermal stress, deformation, and peeling in welded pipe supports.

Axial compression drives a flexible seal to expand radially against a pipe junction, improving sealing while simplifying installation.

A force-generating device counteracts stored spring force so a pipe support can be opened and dismantled without uncontrolled relaxation.

A pinned hinge lets one eyelet hold suspended articles from 0° to 180°, replacing rigid fixed-angle hardware with simpler installation and inspection.

Heating the tube end before sleeve insertion creates a shrink-fit joint that resists pullout, stays leak-proof, and preserves fluid flow.

Self-locking grip rings secure stop collars on well casing, preventing axial slip and centralizer movement across varying diameters.

A reinforced fabric sling with a backing element supports corroded pipes during lifting, reducing extra cuts, crane lifts, and failure risk.

Multiple channel slot positions let a wellbore cable clamp avoid sensors and splices while maintaining secure downhole cable support.

An internal hydraulic gearmotor and pivoting support let the reel rotate in a compact enclosure while freeing storage and access space.

A driven-arm linkage isolates torsional and vertical span motion so mobile irrigation systems detect true lateral misalignment and avoid false corrections.

A guide and abutment element keeps bracket screws from falling out of the slot, making AC unit installation easier at height.

A self-expanding pivot joint varies irrigation radius to reach field corners, reducing unwatered land and water waste in rectangular fields.

Weld cooling shrinkage draws clamp shells and cradle together to grip a pipeline securely without bolts, long clamps, or direct pipe welding.

A split upper and lower clamp with a locking bar and concave holder nails speeds sprinkler sleeve removal while preventing slippage during spraying.

Elongate slots retain and guide anchoring screws so air-conditioning units can be fixed more securely and conveniently, especially at height.

A friction-fit retaining clip lets tent material, nets, or tarps be repositioned on a frame while maintaining adjustable tension and stable attachment.

Rollers and low-friction buffer surfaces protect fluid pipes from support-plate wear, extending service life and reducing leakage risk.

T-slots lock fasteners against rotation, giving pipe and tube supports secure weld-down mounting on curved reactor vessel surfaces.

A thermoplastic pipe surface plus a cross-wound glass-fiber thermoset sheath improves adhesion, corrosion protection, and trenchless laying durability.

A curved roller path improves IV flow adjustment resolution, reduces slippage, and supports motor-driven regulation in compact clamp assemblies.

A slotted pipe support and retaining member enable side-on threaded rod attachment, cutting lifting, dropped parts, and install errors.

Locator tabs pre-position the hose clamp and hose for faster pipe assembly while avoiding interference with sealing efficiency.

A lever-driven U-shaped edge clip uses frictional clamping to hold components securely while allowing removal without scratching or denting surfaces.

A ring adapter with holding legs and a lock arm secures a flow control valve to a plate without tools, reducing installation effort.

Aligned templates and pipe extrusion enable prefabricated duct banks that cut on-site labor, waste, and safety risks.

A ribbed positioning fitting and removable clamp secure tubular structures while reducing stress concentration, vibration, and maintenance difficulty.

Pressure-sensor-triggered booster pumping keeps firefighter primary air tanks above threshold pressure while avoiding continuous energy use.