Pipe Supports TRIZ Cases

Parallel tongues with slots secure cables to struts, reducing installation time and labor costs compared to conventional single-piece cleats.

Co-moulded plastic materials distribute damping across the attachment portion to resolve insufficient noise reduction in threaded stem connections.

Segmented linking parts join coaxial pipes to prevent thermal bridges that reduce efficiency and cause embrittlement.

Discrete plastic hooks on the insert edges provide anchoring retention while the softer main body bends easily to fit annular pipe shapes.

Flat spring initiates folding curves in articulated cable chains to prevent entanglement and wear during disk drive replacement cycles.

An internal fastened portion secures fluidic devices without through-holes, preventing chemical solution stagnation in diagonal channels.

A plastic syringe holder uses a pivoting finger and clip to mount on medical pumps.

A one-piece cable guide uses a u-shaped throat and pliable fingers to retain flexible members on mounting surfaces.

A releasable cable tie uses a backward-facing lever to disengage locking teeth for strap removal.

Segmented tubular sleeves with hinge abutments control minimum radius, preventing lateral drift and simplifying seabed-to-surface installation.

An elastomeric damping component within a cylindrical sleeve absorbs axial and radial expansion stresses, simplifying offshore pipeline installation.

A valve box platform uses knockout portions and U-shaped recesses to enable versatile sizing compatibility for irrigation systems.

Hinged bracket with opposing legs engages posts to accommodate various cable tray configurations and reduce specialized hardware costs.

An S-shaped wire harness routed through a pivotally supported link arm reduces bending stress and absorbs redundant length during sliding.

Segmented piston mechanism with wiper seal reduces environmental contamination exposure while distributing bending and shear loads from drill pipes.

A C-shaped attachment element connects a vehicle lock bar to an actuation lever using a hinge mechanism.

Sensors in a securing tool analyze contact signals to verify proper hose clamp tension, resolving verification delays caused by rapid retraction.

A thermoplastic mounting ring isolates seat belt cables from frame edges, preventing friction damage during installation.

Segmented locking pins replace screw fasteners to eliminate coupling deviation under external force while maintaining installation efficiency.

A riser lock unit retains an elevated sprinkler riser in position using an L-shaped base and open-sided plates.

A sensor unit buffers recent orientation measurements to compensate for platform motion interference and ensure reliable rotational position detection.

Sliding clamps with foam intermediaries fix guide tubes firmly while preventing diameter reduction, reducing installation labor.

Segmentation and dynamics principles enable a single-piece bottom gate to retain media bag tubing, resolving complex clamping access issues.

Nested housings with flexible seals protect leadscrews from subsea encrustation while allowing adjustment.

Radial bellows mount defines a sealed volume around a pipe to dampen vibrations using strained layer damping.

Merging multiple longitudinal bores into a single integrated flow passage reduces valve construction complexity while maintaining precise flow control.

Pivotable plates on a U-shaped clamp rest against rib support sides via an adhesion promoter, preventing carrier surface damage during installation.

A galvanized steel hanger bracket merges duct reinforcement and suspension into one unit.

Flat adhesive surface and curved support unit secure pipes while enabling regulation compliance through extension flanges.

A ratcheting clamp assembly secures elongate elements to cantilevered supports using interlocking saw-tooth jaws.

An aramid fiber protective shell eliminates sliding contact noise and prevents fine chip entry by replacing rigid frames with a conforming flexible barrier.

A retention bracket uses a flexible intermediate portion to flexibly engage and disengage male and female detents for secure line holding.

Segmented tie heads with integrated dampeners distribute pressure and increase friction to prevent slippage of secured bundles.

A pipe clip employs a curved threaded element that rolls within a concave recess, resolving the trade-off between holding force and assembly effort.

Segmented cable extenders attach to narrow hooks, reducing unsupported spans and strain while lowering installation costs.

Replacing threaded connections with a conical wedging mechanism eliminates tensile failure risks while maintaining simple assembly.

Offset flanged rollers convert sliding friction to rolling motion, extending service life while simplifying maintenance access.

Curved mounting clips secure a waterfall base to cable pathways, reducing cable lengths and improving port access.

Adjustable weight chains counteract buoyancy changes from fluid density shifts, maintaining stable pipe configuration.

A plastic bracket body with integrated pipe clamps connects to a locked telescoping metal bracket for secure stud mounting.

A bracket assembly with a sliding tether latches to ladder rungs, eliminating complex figure eight configurations and reducing installation time.

Mechanical clamping replaces welding to dampen vibration in nuclear reactor piping, reducing installation time and operator radiation exposure.

Spring-loaded hinged holders clamp cables in modular receptacles, reducing installation complexity and chafing risks in rotating wind turbine structures.

Mechanical vibration replaces ineffective electromagnetic detection for non-welded girdle wires, enabling precise spacer repositioning.

A controlled drive mechanism moves mold shoulder parts between open and closed positions to facilitate material handling.

A tube fastener uses a projection to deform the tube surface, creating a self-locking mechanism that resists pull-out forces.

Segmented links with detachable ends allow rapid reconfiguration of the drag chain, reducing assembly time while protecting cables during drilling operations.

Segmented securing apparatus adheres to studs and constrains pipes, resolving installation complexity and regulatory compliance issues.

Slidable attaching portions on non-bendable straight pipe sections absorb dimensional tolerances, simplifying routing work while maintaining fixing stability.

Interlocking curved sheet piles span excavated openings to support underground conduits without damaging the pipe.