Veneer Manufacture TRIZ Cases
- Long Cutting Knife Structure for Preventing Edge Plastic Deformation
A quenched steel base metal elastically absorbs heavy cutting loads, protecting the veneer knife edge from plastic deformation at lower cost.
- Long Cutting Knife Structure for Elastic Load Absorption
A quenched steel base metal bends elastically under heavy cutting loads, protecting the veneer knife edge from plastic deformation.
- Teak Plank Lamination Using Veneer Patching and Scarf Jointing
Peeling, defect patching, scarf jointing, and high-pressure lamination turn short teak logs into durable planks with higher yield and straighter grain.
- Adhesion-Free Wooden Straw Production via Modified Metal Processing
Modified metal processing machine shapes natural wood into reusable straws without chemical adhesives.
- Knife Carriage Pressure Bar Segmentation for Veneer Peeling
Segmented pressure bar supports move independently to prevent corner contact and water seepage in peeled veneer.
- Endless Wood Veneer Band Fabrication via Stacked Plate Cutting
A continuous fabrication method cuts and connects fiber plate elements from a single block into an endless band without intermediate storage.
- Wooden Panel Manufacturing Using Segmented Slat Layers
Segmented slat layers form wooden panels via intelligent end-to-end joining, reducing wood waste from uniform cutting requirements.
- Veneer Lathe Contact Member Arrangement for Small Diameter Cutting
Two spaced contact member groups allow insertion into adjacent spaces, enabling continued cutting to a 10 mm core without interference.
- Free-Form Wood Profile Manufacturing via Veneer Segmentation
A method segments adhesive-coated wood veneers into layers that are individually shaped and reassembled to create complex three-dimensional profiles.
- Veneer Lathe with Movable Spindles for Seamless Peeling Transitions
Movable spindles and transfer arms enable seamless transitions between spindle and spindleless peeling, eliminating separate rounding machinery.
- Scarfing Machine Pressing Unit Reduces Veneer Friction
A scarfing machine pressing unit positions downstream to reduce frictional forces acting on veneer edges during transport.
- Veneer Feeder Head Segmentation for Single-Sheet Transfer
Segmented gripping elements separate the top veneer sheet from the stack, preventing misfeeding and maintaining dryer efficiency.
- Wood Panel Manufacturing via Segmented Slat Assembly
Segmented slat assembly eliminates post-assembly sawing steps to reduce material waste and production complexity.