Domestic Articles TRIZ Cases

A forming apparatus uses movable stomp feet and swing arms to compact composite plies over a tool surface.

Extracting heating elements to stationary support shells eliminates cable tearing risks during blow mold part replacement.

Flexible film reduces friction between mold and aerodynamic element, preventing shear damage to riblets during demolding.

Modifying the substrate surface creates distinct regions that control resin adhesion, preventing edge splay and ensuring uniform fastener edges.

A side wall around a plate hole guides long fibers into the thickness direction, preventing waviness and maintaining strength near fastening areas.

Infrared welding joins metal reinforcements to thermoplastic panels, reducing weight while maintaining structural integrity.

Localized conductive glue injection along pultruded carbon fibers establishes electrical pathways for lightning protection without degrading adhesive capacity.

Milled socket receives a cured thermosetting patch, eliminating high heat and specialized tooling.

Segmented machining and welding of polyethylene pipe stock reduces manufacturing costs for large diameter fittings.

A multilaminar foamed polymer wall uses a combined blowing agent system to form distinct cellular microstructures within the core layer.

A two-stage nozzle descent displaces internal air through a gap before sealing, preventing entrapment and bubbling during high-pressure molding.

Separate supply paths and a suck-back step enable uniform mixing of immiscible liquids like oil and water during container molding.

Delaying pressurized liquid supply until after the seal member opens prevents pressure buildup that causes misalignment and uneven wall thickness.

Overlapping seal sections in the closed mold prevent polyurethane burr formation during high-pressure injection, simplifying manufacturing and reducing costs.

Replacing pneumatic expansion with hydraulic pressure eliminates toxic acetaldehyde byproducts and integrates sterilization during blow molding.

Rotating the turret block transfers inserts between forming and overmolding stations, enabling overlapping operations that reduce cycle time.

A pneumatic grip device uses Bernoulli nozzles to hold plastic preforms without mechanical contact.

Compression blow forming controls HDPE crystallization kinetics to lower moisture vapor transmission rates and improve thickness consistency.

Partition parts divide the covered space into closed zones, balancing energy saving with temperature control responsiveness in injection molding machines.

Composite welding sleeves withstand higher operating pressures by using oriented thermoplastic strips wound onto a cylindrical support.

Multimodal metallocene polyethylene resin improves creep and stress cracking resistance in injection-molded fuel tanks.

Liquid filler in flexible bag suppresses pressure fluctuations and rocking to reduce leakage.

Propylene-1-hexene copolymer with glass fibers and compatibilizer overcomes flowability limits to enable thin-wall automotive parts.

Piercing elements displace fibers to create through holes before solidification, reducing fiber damage and operator time during assembly.

Extruding a recycled PET and ethylene vinyl acetate blend with a compatibilizer at controlled shear rates to improve homogeneity.

A movable plunger seals protrusion cavities in foam molding tools, eliminating post-processing flash removal and ensuring uniform hole openness.

Assembling thermoplastic composite shells with overlapping straight edges and butt-jointed curved segments to form a complete bicycle frame component.

Pressure overcomes viscosity and temperature barriers, forcing adhesive into fractures to seal damage without spontaneous leakage.

A swirl imparting element rotates pressurized liquid to expand preforms radially during hydroforming.

An FRP member in a golf club head maintains a modal damping ratio below 0.6% to resolve short sound duration issues.

Vibrating punches via oscillation generators prevents air inclusion and crack formation, lowering compression forces and wear.

A golf club head weight of 195 g or more paired with a butt-end weight member creates an anti-off-plane moment.

Lock control unit inhibits safety cover opening when injection pressure detection detects high pressure, preventing resin jetting hazards during maintenance.

Add invar substructure to composite mandrels to limit hat wall rotation, reducing thermal expansion mismatch and preventing part sagging.

Exposed front and back surfaces on a molded die enable fluid delivery through feed holes, eliminating substrate slots that weaken structural strength.

An automated changing device removes and positions blow molds to reduce manual changeover time.

Combines upper and lower mold modules into movable carriers to merge injection molding with protective layer application, eliminating transport damage.

Applying a thermal gradient across the film thickness allows deep drawing without generating internal stresses that distort printed graphic designs.

Segmented injection head nozzles seal directly against preform surfaces, eliminating liquid retention spaces that cause contamination and malformations.

Amphiphilic modifier channels water vapor through non-porous plastic film, resolving breathability and contamination trade-offs.

Segmented mold sections press thermoplastic resin sequentially, suppressing insufficiently pressed areas while avoiding expensive high-load press machines.

A male surface fastener member uses lateral resin intrusion prevention walls to protect the engaging element zone during foaming resin molding.

Pad printing transfers color patterns to the mold surface, eliminating leakage risks and complex masking systems during rotational sintering.

Differential heating of polypropylene preforms enables hot fill resistance up to 212°F without expensive heat-set machinery or vacuum panels.

Coordinated nozzle and container motion distributes multiple fiber bundles evenly, reducing stress concentration and pore formation in storage containers.

Dynamic handle molds resolve the contradiction between connection reliability and processability in injection stretch blow molding.

Segmented sliding molds move in intersecting directions to eliminate clearance gaps, preventing burr formation during integrated panel body and frame molding.

Segmented molding and parameter changes produce a durable silicone ring with a symmetrical inner-band, eliminating surface texture flaws.

A laser-permeable thermoplastic functional part connects to a substrate via a laser-absorbing barrier layer that generates localized heat for fusion.