Layered Products TRIZ Cases

Photobase generation cures organosiloxane coatings at low temperatures, replacing complex physical vapor deposition equipment.

Configurable edge notches encode identifying information on circuit boards, eliminating separate marking steps and reducing manufacturing costs.

A magnesium-doped aluminum stamper base material achieves fine crystal grains through controlled forging.

Segmented mold geometry creates four radiating parting lines that distribute material flow evenly, preventing rupture during biaxial stretch blow molding.

A prepreg laminate structure uses a resin-free base material to achieve smooth design surfaces.

Segmented perpendicular conductors reduce eddy current losses and heating in microwave ovens.

Aminoguanidine scrubbers neutralize formaldehyde and acetaldehyde in crust leather, maintaining low VOC levels for automotive applications.

Multi-layer flexible pipe uses a polyphenylenesulphide barrier layer with elastomeric components to maintain tensile elongation at yield.

Upward-directed locking part extending over 0.1 times panel thickness prevents edge loosening in thin rigid thermoplastic floor panels.

A flexible display panel replaces rigid glass substrates with etching stop layers and flexible materials to enable bending.

A polymeric nanofoam uses a miscible acrylonitrile and methacrylic polymer blend to expand into a nanoporous structure with high porosity.

Nesting an optical fiber sensor in the adhesive layer preserves thermal transfer efficiency while enabling precise temperature measurement.

Contoured walls with uniform thickness enable stable nesting of stacked articles, reducing abrasive contact and paint requirements.

Disposable adhesive patches seal damaged healthcare device surfaces, preventing pathogen accumulation in cracks during routine cleaning.

Local heat-activated adhesive bonding reinforces hollow profiles without extensive foam coverage, reducing material usage and manufacturing complexity.

An intermediate member uses a plate-like supporting member to hold separated ceramic blocks for precise positioning between objects.

Curved screen plate conforms to bent substrate geometry, resolving flat plate interference and enabling precise deposition on complex surfaces.

A three-dimensional molded structure containing through-holes enables efficient volatilization of chemical agents from its internal surfaces.

Optimizing center of gravity and fiber ratios in a lightweight golf shaft resolves head control trade-offs while maintaining swing balance.

Vaporizing base film deposits a coating on carbon nanotubes, reinforcing mechanical strength while maintaining thermal conductivity for electronic components.

Controlled molar mass distribution prevents bubble formation during rotomoulding.

Mixed fiber yarns combine aromatic polyamide and polyester fibers to resolve weight and cost trade-offs while maintaining high temperature resistance.

Ring opening metathesis polymerization fills sub-millimeter features completely, resolving shrinkage and strength trade-offs in molded microstructured articles.

A PET preform incorporates polymeric additives to create an opaque, reflective surface that blocks visible and ultraviolet light.

Modified fiber orientation in composite laminates increases longitudinal strength and resists splitting from impact damage.

Mechanically interlocking adjacent honeycomb core panel edges avoids adhesive blockage, preserving open cells and maximizing sound suppression capability.

Embedded antennas reduce wind drag and environmental exposure while preserving structural integrity and ballistic tolerance.

Segmented double-layer textile carrier resolves abrasion resistance versus hand tearability trade-offs in automotive cable harness protection.

A compositionally gradient amorphous carbon film adjusts silicon and hydrogen concentrations to balance wear resistance and mating member protection.

Polyester composition with ABS modifier and epoxy compound maintains ductility and chemical resistance while minimizing permeability.

Dense WC coating on graphite base prevents peeling and cracking in corrosive semiconductor environments.

Replacing PVC with polyester eliminates plasticizer migration while a multi-catalyst system creates durable crystal patterns for weather resistance.

Segmenting wicking and absorbent layers in a reversible bamboo fabric resolves the trade-off between high moisture retention and wearer comfort.

Epoxy-based adhesive resolves PET film curling and weak adhesion under high temperature humidity.

A hybrid fabric combines textured and untextured multifilament yarns to create a durable textile structure.

Sol composition preserves three-dimensional network skeleton to maintain thermal insulation while improving handleability during ambient pressure drying.

Intermediate layer with lower thermal deformation temperature prevents separation and hides uneven electrode patterns.

Acrylic adhesive composition creates peel force gradients to inhibit light leakage in liquid crystal displays.

Selective surface photopolymerization increases local viscosity, resolving the trade-off between fiber impregnation ease and handling tack.

A photo-aligned liquid crystal display device uses an alignment film with a surface oxygen gradient to stabilize afterimage characteristics.

Interleaved Kevlar layers create a flexible hinge within rigid carbon fiber composites.

A cholesteric liquid crystal optical film maintains uniform phase difference during curved forming via controlled infrared irradiation.

A laminated panel structure with peripheral and connecting structural materials enhances slope device rigidity.

A polycarbonate composition combines an elastomer-modified graft copolymer and a polysiloxane-polycarbonate copolymer to improve low-temperature ductility.

Laminating drawn filament nonwoven fabric onto a porous sound absorber improves low frequency sound absorption while maintaining lightweight flexibility.

A thermally conductive sheet uses oriented boron nitride flakes in a binder resin to create tacky surfaces for secure electronic component mounting.

Adhering a fabric or leather pocket to an injection-molded rubber case consolidates device protection and card storage into one unit without adding bulk.

Noncrimped spunbond nonwoven web bonded to elastomeric material via ultrasonic bonds.

Porous carbon compounds absorb water to regulate cell size during polymer foam extrusion, enabling larger cells with low GWP blowing agents.