Machine Supports TRIZ Cases

Gas springs and scissor links replace noisy screw adjustment to give a piano seat quiet, low-effort height control with minimal rebound.

Balanced positive and negative ion generation in an air handler cuts recombination losses while reducing allergens, pathogens, and odors.

A compact butt mount uses magnetic, screw, and strap attachment options to secure long guns in tight quarters without bulky permanent racks.

Two-point mounting and a spacer let sport boards hang parallel to walls or ceilings at varied angles without cantilever damage.

Four corner columns with separate support and covering parts keep the tool cabinet cover board fixed under load and prevent bending.

A bracket arm and finger lock into preformed beam channels to hide fasteners, speed assembly, and improve structural appearance.

A swivel shelf with adjustable attachment points adds stable accessory space to thin monitors without blocking the screen or damaging the housing.

Embedded conductors in a rigid electrical raft with a visible map replace bulky engine harnesses and speed assembly, repair, and fault diagnosis.

An adapter bracket and telescoping actuator retrofit existing desks for affordable motorized height adjustment without tools.

Tilt tracks and slider blocks keep pressure focused on the seal, reducing air leakage and extending heavy-load suction attachment.

Open-corner supports and a modular frame improve item placement, reduce swinging, and allow compact disassembly of overhead storage racks.

Magnetic attachment and segmented pockets keep phones, tablets, drinks, and tools off the floor yet easy to reach during workouts.

A J-shaped hinge and sandwich brake create an adjustable hidden joint that rotates through flat faces while carrying heat and electrical power.

Single-piece metal support and moving members with bearings and SMA wires cut suspension thickness while enabling robust optical image stabilization.

A friction-cinched cable secures signs or feeders to living trees without nails, then disengages automatically as trunk growth exceeds cable length.

Adjustable serrated stop arms and housing-mounted shock absorbers extend pivot range while reducing impact loads and component fatigue.

Multiple angled stakes and an adjustable holder stabilize umbrella poles in soft sand or tough grass while allowing compact storage and setup.

Air channels, apertures, and thermal insulation cut heat transfer from machinery surfaces, helping mounted data acquisition devices run reliably.

Meshing toothed plates and an eccentric pull-rod lock spread loads beyond hinge bolts, improving folding-joint strength and safety.

Vertical tracks, O-rings, and a rotating mount let hunters secure different bows on a tree stand without sacrificing adjustability.

An integrated limiter and guide replace pin-latch parts in a hay rake spring assembly to improve rigidity, reduce wear, and simplify assembly.

A stepped sliding support lets the elevator brake float relative to the car, preventing roller guide compression and preserving running clearance.

Jaw spacers and retaining members control clamp compression for accurate, repeatable holding without specialist tools or slow reopening.

A single spring and re-routed force transmission element deliver two arm-support modes while reducing exoskeleton weight, complexity, and dust sensitivity.

An adjustable pressure element enlarges the air space in a composite suction bracket, improving wall or glass attachment security and installation ease.

A welded enlarged pin head and clasped beam channel reinforce adjustable J-cup brackets to resist deformation and improve lifting safety.

Slidable supports with ribbed locking couplers secure varied utility modules on a wall-mounted platform while allowing easy repositioning.

A bent sheet metal blank forms a one-piece boom part with integrated bearing seats, cutting joining complexity and failure risk.

Actuators, linkages, and tether release let a multi-arm UAV unfold from compact storage for faster autonomous deployment and transport.

A heat-treated one-piece steel anchor plate creates a compact escape point that supports heavy loads without bulky fixed fire escape structures.

A deformable top-mounted camera support enables remote door coupling inspection while bending during car jump to preserve overhead clearance and avoid impact.

A gas-cylinder support arm and timing link keep a medical device level while raising, lowering, and locking it with less operator fatigue.

A hung fitting sleeve and bending-edge positioning units simplify ceiling fan assembly while resisting vibration-driven loosening.

Splitable rope connectors let auxiliary winches extend hoisting reach while simplifying rope handling and load transfer at a hang-off point.

An elastic hoop locks into pole holes to support heavy plants while avoiding root damage, stem constriction, and difficult soil installation.

An integrated spacer clip and anchor pin keep grid reinforcement at a set offset, preventing detachment and deformation during construction.

A separate mounting adapter lets one field device snap, screw, or bayonet into multiple orientations, simplifying installation and preserving signal accuracy.

Elastic mounting arms replace straps to spread headset weight across the skull, easing nose bridge pressure while keeping a secure fit.

A planar contact section replaces knife-like channel edges, boosting sheetrock anchor holding strength while reducing substrate failure.

Attachment means and external mounting structures let trusses carry varied suspended loads without overstressing cross members.

An adhesive threaded insert mount attaches helmet devices without drilling, preserving ballistic shell integrity and modular compatibility.

A sacrificial alignment pin yields below service loads, preventing unintended load paths and thermal restraint in bolted mating components.

Spring-loaded roller units replace fatigue-prone cantilevers to keep bicycle wheels securely positioned and adapt to different rim sizes.

A hinged kickstand with separate hinge mounts and mounting pockets gives tablets stable multi-angle support without bulky integrated structure.

A flexible groove-fit hanger suspends loads without drilling, cutting noise and vibration while protecting metal decking and concrete in seismic events.

Inner and outer pressing blocks compress the sucker body during rotation to remove trapped air and secure stronger surface attachment.

A knob-driven gear and elastic locking member let telescopic arms adjust easily and lock securely for different head shapes.

An inflatable body-conforming optic support uses straps and tethering to steady binoculars or cameras while reducing user movement transfer.

Magnetic attraction plus a protrusion secures surface-mounted articles while simplifying installation and keeping removal quick and accessible.

Electronic rail and post locks let a portable security case mount securely to fixed locations while still allowing fast authorized access.

A universal pegboard base uses ramps, detents, and mechanical stops to swap hooks, clamps, or magnets without over-rotation.

Dual docking cups and internal security levers lock life support equipment during transfer while reducing misalignment, cleaning issues, and staff effort.

Simultaneous dual-lever release with a spring ring improves latch reliability, prevents accidental separation, and supports scalable manufacture.

A hex-pattern mounting plate adds four auxiliary spindle positions, enabling more arm configurations without reorienting the plate.

A spring-loaded swiveling gate supports heavy drill stems during loading, reducing hydraulic lift resistance, rod skewing, and breakage.

An aligned back housing and module layout creates an accommodation space that cuts wall distance while keeping a large multi-screen display slim.

Angled and corner connectors align with standard beam slots to build suspended ceiling grids for triangles, trapezoids, and other ornamental panels.

A magnetic key couples to the rotor to lock or free the screw head, blocking standard-tool access while allowing repeated removal.

Segmented drum grooves, a cable keeper, and wire routing cut cable noise, abrasion, and support stress in stage lift assemblies.

A freely placed touch panel tilted 5°-45° improves visibility across connected image forming units and reduces user movement.

A built-in weight or magnet shifts the razor handle's center of mass so the cartridge stays off resting surfaces and avoids mess.