Pipe Heating/Cooling TRIZ Cases
- Multi-Chamber Resin Magazine With Static Mixing for Sewer Repair
Separate resin chambers and piston dispensing mix epoxy only at the pipe repair site, cutting waste and enabling fast-curing use.
- Multiphase AC Reaction Tube Reactor for Low-CO2 High-Temperature Heating
Electrically conductive bridges heat straight reaction tubes with multiphase AC, enabling >500°C chemical processing with lower CO2 emissions.
- Subsea Pipe Heating Cable Insulation Without a Heavy Outer Jacket
A water-permeable peripheral space and fluoropolymer insulation keep subsea heating cables operating for long-term hydrocarbon transport without heavy outer jackets.
- Internal Heating Trace Assembly With Ceramic PTC Overheat Control
Ceramic PTC elements in parallel bus bars create a self-regulating heating trace that stabilizes tube temperature and prevents overheating.
- Subsea Induction Heating With Counter-Current Flow Against Hydrate Blockage
A vertical annular-return subsea heater uses induction and counter-current flow to prevent hydrate and solid deposits with less bulk.
- Process Chamber Gas Line Insulation for Stable Heated Gas Delivery
A reflective heating jacket cover and air pocket layer limit external heating, cut heat loss, and keep process gas temperature uniform.
- Steam Injection Pipe Preheating to Prevent Condensate Loss
Heat traces preheat and hold long steam pipes near steam temperature, limiting condensate, heat loss, and water hammer in hydrocarbon recovery.
- Heatable Media Line Assembly Without Adhesive Residue
A high-temperature film blocks adhesive from the tubular media line, enabling faster assembly and cleaner laser welding surfaces.
- Composite Ceramic Reaction Tube With Integrated Electric Heating
A multilayer ceramic reaction tube combines gas-tight heat transfer with integrated electric heating to reach 1300°C and cut coking and energy loss.
- Multiphase Reaction Tube Heating for Higher Power Reactor Design
Multiphase AC and star-bridge tube connections raise heated length and resistance, cutting high-current supply complexity and losses.
- NiAl Tubular Microchannels via Laminated Reaction Forming
Laminated Ni and Al substrates with sacrificial aluminum wires enable precise NiAl tubular microchannels despite poor alloy formability.
- Heated Hose Fixing Layout for Cut-to-Length Conductor Access
Interrupted fixing-element application exposes hose conductors at set positions, enabling cut-to-length production without damaging them.
- Heated Connector Cover Structure for Full-Path Freeze Protection
A two-part insulated cover extends protection to the second connector area, using air cavities and heating to prevent media freezing.
- Continuous Heating Wire Layout for Vibration-Resistant Fluid Lines
A continuous double-laid heating wire along the fluid line and connectors cuts assembly waste, lowers cost, and avoids vibration-prone joints.
- Flexible Pipe End-Fitting With Isolated Electric Zones
Three isolated electric zones in the end-fitting ground leak currents and prevent potential shifts in electrically heated flexible pipes.
- Pipeline Hydrate Detection and Microwave Ablation Through Bends
A bend-navigating in-pipeline tool detects hydrate blockage by temperature and removes it with microwave heating, avoiding chemical inhibitors.