Pipe Supports TRIZ Cases

Resilient gripping hooks and shape-retention wire keep cable hangers attached during loading while separating AC and DC runs for faster installation.

Mechanically printed protrusions keep vehicle conduit clips accurately positioned during transport and installation without welding.

A two-part latching cable retainer replaces ties or tape, enabling robotic wiring harness attachment with lower assembly complexity and cost.

Hinged shells and linear-motion bearing joints let one cable holder open within a stack without loosening adjacent cables or adding tool-heavy assembly.

L-shaped interlocking fingers keep adjacent pipe clips securely joined during pipe removal, while allowing deliberate release by pivoting.

A flexible foam channel grips charging cords by surface friction, keeping them visible, easy to retrieve, and less likely to fall.

Parallel clamp rails separate and label sheathed cables of varying thicknesses, improving heat dissipation and allowable amperage.

Rotatable guides with radial and axial locks hold flat flexible cables at set angles while avoiding sharp bends in dense electronics.

Orthogonal tabs lock into T-channels by rotation, cutting T-slot bar assembly time while keeping grow-light frames secure.

Flexing finger pairs let one routing clip hold different tube diameters while limiting axial shift and relative movement.

Rubber stackable pole guards replace crack-prone concrete to protect dip cables with faster installation, easier repair, and below-ground coverage.

Modular profiles, crossbars, and extension sections let lab media supply layouts adapt in width and depth while supporting electrical, sanitary, and gas lines.

A stepped securement member combines spacing and tie-down in one part, using ratcheting apertures and adapters to adjust cable position.

A rotating clip with cantilever arms grips different cable diameters in one gesture while allowing quick release without added stress.

Cap-and-base channels and ratcheting plungers secure solar module cables, preventing entanglement, damage, and disorganized routing.

A hinged hook-and-pin mount with pliable inserts keeps Rogowski coils concentric on varied transformer geometries for accurate, faster installation.

Adhesive-filled housing and sealing gaskets secure cables without clamp pinch points, preserving signal integrity and easing installation.

Laser-fused plastic refrigerant pipes and flanges cut vibration damage, avoid diameter deformation, and reduce pressure loss in air conditioners.

A barb that pierces the strap locks cable bundles against loosening under load, improving long-term support in hard-to-access installations.

Snap-fit and pivotable cable modules organize optical and electrical tower connections, cutting FTTA routing complexity and easing expansion.

J-shaped hook arms let wire basket brackets mount around building obstructions while supporting multiple wire positions and reducing deflection.

A tapered adapter with ribs and grooves spreads bending loads away from conduit ends to prevent kinking, damage, and robotic downtime.

An integrated aircraft clamp secures cables and conduits together while an insulating shield blocks arc propagation and cuts mass and anchor points.

A ramp-guided latch lets a hinged P-clamp bend and lock by hand, securing wire bundles with radial and lateral reinforcement.

An integral hose guide and film-hinged clamp secure the motorcycle brake line without separate holders, cutting parts and installation time.

Multiple clip pockets and structure-engaging members secure cable routing on reduced PV frame and rail flanges while allowing easy cable handling.

Using polymer concrete or plastic support stands, metallic pipes stay safely supported without electrical bonding or grounding labor.

A notched bracket frame and locking plate secure cable cleats to wire baskets, preventing cable displacement during short-circuit forces.

A segmented holder sandwiches the wire to stop rotation, fit varied cross-sections, and reduce vibration wear in wire harness joints.

Voltage-driven braided reinforcement expands for tube insertion, then contracts to lock profiles without drilled holes, heat, or added fasteners.

An integrated strap-and-head tie uses dual slots for bi-directional insertion, cutting mold count, assembly effort, and installation errors.

Flexible clamp arms and movable distribution openings organize mixed-size chassis cables, keeping routing aligned and tangle-free.

A hollow cylindrical bracket nests inside the wiper arm spring to snap-fix the fluid tube with less bulk, lower cost, and easier assembly.

A semi-circular cord cuff clips the distal cord end back onto the cord to prevent unraveling, tangling, and loose coil storage.

A decoupling element between the cable and drag chain wall absorbs impact energy, reducing crack growth, insulation damage, and transmission issues.

Movable barrels skew cable bores to stop rotation and hold a desired bend, avoiding tape or ties while protecting cable life.

A stud-mounted retainer uses friction, elastic grip, and adjustable fastening to keep Rogowski coils accurately positioned in tight spaces.

Spacer-mounted pins keep cable track sections apart to prevent snagging, protect cables or tubing, and preserve smooth low-friction movement.

Staggered C-shaped clips and ribbed holding members secure microducts and cables of varying diameters while simplifying surface mounting and reuse.

A ceiling-mounted rotating tube with retractors lifts a VR headset power cord off the floor to prevent tripping while preserving user movement.

A wrapping insert adds adaptable gripping force so conventional cable hangers can securely mount multiple fiber optic cables with less structural stress.

Keyhole slots and an in-line sliding lock let fiber cables snap in laterally for faster installation, secure fixation, and easy individual access.

A movable roller tube in the clamp base lets cables shift during mounting, reducing bending and torsional stress while allowing easy reattachment.

Releasable encasing units let clean room cable guides replace single lines or support chains while limiting particle release and downtime.

A pivoting latch and segmented collar protect pump cables on changing tubing diameters while cutting installation time and part loss.

A dual-contact holder isolates heater hot water pipe vibration from the HVAC case, cutting cabin noise while keeping pipe positioning stable.

Dual attachment points and a spacer rod stabilize modular cable enclosures while preserving access, visibility, and easy assembly.

Independent brackets and line clamps replace bundled conduits, reducing line weight and stiffness so collaborative robots can carry heavier tooling.