Pipe Supports TRIZ Cases

Multiple threaded sections catch a loosened nut before detachment, while distance sensing detects nut descent and alerts users.

Elastic cantilevered flanges retain the threaded shaft in an open clamp shell, keeping the assembly aligned during shipping and installation.

Modular interlocking spacers hold conduits at precise spacing in 4-inch or 6-inch wall forms while allowing easy lateral removal after curing.

Flexible arms create cam-like interference to hold different tube diameters with consistent retention and sliding force using one retainer.

A guided hose clamp support uses a base recess and upright bearing surface to prevent cable or duct friction and pinching during aircraft assembly.

A variable-width channel lets a bracket rotate in 90° steps on a cross member, then lock securely without rail removal or reassembly.

A modular aircraft line assembly cuts fuselage interface points by using flexible bracketed sections for easier routing and lower installation effort.

A thin foam plate with keyhole slots secures and labels medical tubing on varied surfaces, reducing clutter and contamination risk.

Varying spring stiffness and an undulating contact surface spread clamp load evenly on risers, limiting peak pressure during diameter changes.

A segmented snap-lock clamp supports fixed pipe sizes while fitting varied insulation thicknesses and preserving continuous coverage.

A connecting plate joins inlet and outlet plugs in one step, cutting liquid-cooling assembly time and labor for electronic devices.

A sliding bracket and support bar secure sprinkler hoses without tools or tape, speeding installation while keeping hose positioning reliable.

S-shaped tethers between inner and outer clamp frames isolate tube and panel vibrations while enabling single-operation molding.

S-shaped vertical and horizontal tethers let a one-piece tube clamp isolate panel-to-tube vibration without two-shot molding.

Pivoting rocker supports distribute load across rollers to turn 6-12 m pipes without deformation while adapting to different diameters.

A monolithic extruded rooftop support cuts on-site assembly, improves strength, and avoids differential weathering across components.

A shroud and bracket hood route and conceal the actuator cable to prevent pinching damage and avoid a visible transom hole.

A threaded, slotted adapter lets tubing or fittings attach during rough-in, cutting install time and leak risk with a pretested outlet box assembly.

A flexible elongated U-bolt body conforms to irregular shapes while the bracket receiver enables adjustable, secure temporary or permanent clamping.

Nonlinear strap and body engagement surfaces distribute cable load to prevent lock degradation and bundle loosening over time.

Dual screw and worm lifting with arc clamps improves loading and unloading of tubular parts while reducing manual handling risk.

Non-linear interlocking strap and body surfaces create a ratcheting cable bundle lock that resists loosening under long-term load.

Interlocking clamp sections let one pipe support clamp fit varying insulation thicknesses while simplifying inventory and preserving insulation coverage.

Spacer wheels lock clips to internal ribs to keep dual containment pipe elbows aligned, reducing parts while preserving flow radius and joint integrity.

A flexible clamp connector fits different pipe sizes on struts, cutting fasteners, preventing over-tightening, and limiting pipe movement.

Internal rollers and cam-driven jaws align and hold flexible tubing for accurate cutting while reducing jamming, slivering, and lubricant use.

A resilient retainer with interlocking tabs lowers insertion force, enables tool-free service, and improves radial force distribution in tight fluid connections.

A concave hose support lifts concrete slurry hose off pavement while allowing sliding movement to reduce surface damage and operator strain.

A flush hose guide uses rollers and a complementary stopper to limit hose wear while blocking dust and moisture from the reel compartment.

A tab-locking retainer with ribs and notches cuts insertion force, enables tool-free assembly, and protects brittle barbed tube connections.

A movable rod fastener changes hanger angle to fit structural supports securely and protect pipes, conduits, and sprinkler lines in seismic conditions.

A layered conduit pairs a nylon core with a flame-retardant polyolefin sleeve to meet aircraft seat cable fire standards without cracking.

Complementary conical members and a sealed fluid cavity create wedge locking for secure cylindrical attachment with easier detachment.

A cushioned multi-line clamp keeps flexible lines separated in tight spaces, reducing chafing, particle generation, and flow-kinking risk.

Guide grooves and pipe ridges stabilize gas turbine nozzle pipes, suppress vibration, and allow thermal elongation with a simpler support structure.

A flexible elongated U-bolt conforms to different workpiece shapes while preserving secure grip for temporary, hanging, or semi-permanent fastening.

A band clamp spreads tightening force around an umbrella pole to prevent dents, scratches, rust, and bulky mounting.

Geometric grooves and stop projections replace bolts and bonding, creating a reliable composite support for loaded cables and pipes.

Resilient angled fins grip medical conduits across varying diameters, improving bidirectional pull resistance without adhesive-related skin irritation.

Gravity-driven spherical sliding and jacking enable precise steel structure positioning and faster removal with less manual high-altitude work.

A repositionable fastener lets pipe bracing fittings span varying anchor distances while staying compatible with different orientations and dynamic loads.

A cam locking arm and safety stop retain the male fitting unless rotationally aligned for release, reducing accidental fluid-line separation.

A portable tire-edge guide blocks the tire-ground crevice and lets hoses slide laterally with low friction during washing or inflation.

A floating OTEC layout uses a continuous offset staved cold water pipe to limit motion, cut parasitic load, and improve deep-water discharge control.

Perpendicular handles on a removable hose-mounted grip shift force from hand strength to body leverage for safer, faster hose connection and disconnection.

A one-piece buttonhead tie with integrated head, dual slots, and bi-directional locking cuts mold count, handling errors, and installation effort.

A tapered entry with a tongue and wings guides misaligned conduit into the coupler, cutting installation time and tolerating prefabrication errors.

Load plates, lid positioning, and sensor feedback automate control line clamp installation, cutting manual red zone work near the wellbore.

Multiple magnets and adjustment screws let pipe supports fit curved fuel tanks without welding or drilling on flammable surfaces.

Pre-attached fasteners and a pivoting jaw let one brace clamp fit multiple sway brace pipe sizes while reducing installation effort.