Pipe Supports TRIZ Cases

A telescopic hold-down and elastic support let one clamp fit different pipe diameters with tool-free installation while reducing vibration and noise.

A winch-cable pivot lets a heavy hose tower be raised manually, reducing crane use while keeping the hose management base stable.

A multi-stage OTEC heat engine and offset staved cold water pipe improve heat transfer while cutting pumping losses and discharge impact.

A bracket and retainer clamp a wall lead-through in single wallboard, improving stability while avoiding moisture barrier disruption.

Injection-molded PBT hooks with glass fiber, flame retardants, and UV stabilizers support heavy cables and hoses in harsh industrial conditions.

A clip-guided vertical assembly lets long oil tubing be installed after housing insertion, easing compressor shell space limits.

A closed sleeve fixation design simplifies bend restrictor assembly while improving stability and multidirectional cable protection underwater.

A loose-fit holder and stop collar secure building pipes during seismic motion without clamp compression that can crack metal or plastic components.

A flexible conduit and adjustable clip place the webcam at monitor center, improving eye contact without blocking the display.

A sliding frame-and-connector layout secures plumbing boxes while allowing rotation and multi-direction line entry without fasteners.

Elastic vibration-proof brackets and separated vertical channels block pipe vibration from reaching structural steel and sensitive equipment.

A cover element shields roof drainage pipe clamps from weathering while matching gutter and downpipe color and surface finish.

A pivoting three-segment coupling simplifies pipe joint installation while maintaining gasket sealing and resistance to separation forces.

A pivot clip holds segment spacing during pipe coupling, cutting incremental tightening time and easing installation when access is limited.

A split clamp with a locking shaft lets sprinkler sleeves mount from the front, cutting installation time and avoiding ceiling damage.

A C-shaped IV pole holder secures pacemakers, ether screens, probes, and extra IV bags while staying cleanable, reusable, and shielded from contaminants.

A pivoting clip wedges a hanger rod against a surrounding strut to resist buckling while avoiding slow, costly welding or multi-fastener installation.

A low-friction pipe buffer with rollers lifts sagging fluid lines off support plates, reducing wear, preventing leaks, and signaling roller replacement.

Multiple groove sets in one adapter fit different shaft splines while a locking foot and plunger secure attachment to a track or surface.

Secondary compression reshapes the rivet nut bulge into a zigzag form, preventing tensile pullout and eliminating welding in conduit loop clamps.

Circumferential grooves and smooth transitions hold hoses axially and radially without sharp-edge damage, while reducing abrasion, noise, and vibration.

A rotatable hook, cam lock, and U-shaped pins let a sprinkler reducer be height-adjusted after coupling while staying securely fixed.

An endless screw and mobile frame let installers correct height and orientation errors in tubular supports without complex positioning.

Lead-filled and resilient anti-vibration mounts stabilize shifted frac manifold components, easing assembly while reducing handling hazards.

Integrated sensor docks in underwater cladding simplify subsea monitoring and retrieval while helping mitigate vortex-induced vibration.

A prefabricated dust-tight sheath with modular sleeve units lets cleanroom cable bundles be inserted or replaced without chain abrasion or full renewal.

Transverse bulkheads with complementary couplings join subsea bundle sections securely, cutting welding and inspection while maintaining leak-tight seals.

Interlocking split protection members shield offshore cables and pipes from impact and abrasion while allowing flexible, low-lift installation.

Protrusions and fitting grooves restrain inner-pipe rotation and axial shift while accommodating CO2 thermal elongation in a gas turbine combustor.

A closed chain of drive bearings extends only the needed hose length, cutting pressure loss, torque waste, and hose wear in aircraft ground cooling.

A pivot clip and monolithic pivot keep coupling segments spaced for faster pipe installation and a uniform gap, even with limited access.

A rotating hook and base mechanism adapts pipe hangers to different brace pipe sizes, cutting installation time while keeping support secure.

A curved cable tie head lets the strap run parallel to the bolt reception space, simplifying molds and improving attachment across bolt lengths.

A hand-pushed lever locks the sprinkler bracket to the ceiling support frame, avoiding elastic-member misalignment and complex side frames.

A conical shoulder and chamfered bore let the transfer tube slide under thermal growth while reducing axial resistance and fretting.

A pressure sleeve shifts nut force below the fastening opening, preventing clamping hook twist-out and preserving force absorption on T-beams.

A bonded elastic recess surface secures hydraulic hoses without crushing or chafing, while simplifying assembly and fitting varying diameters.

A gravity-driven pile tower embeds beside a subsea pipeline, cradles it from below, and lifts it with lower stress and corrosion risk.

Fluid pressure and floor-resting restrictors hold sludge laterals in place, preventing breakage without costly floor anchoring.

A P-clamp with a controlled-yield connecting section holds fuel lines in flight but deforms in crashes to prevent rupture, leakage, and fire.

Precision-drilled alignment holes let one optical fiber rotate without disturbing adjacent fibers, improving multicore fiber assembly accuracy.

Independent cable clamping blocks and a spliced partition plate keep wind turbine cables separated, cooled, and protected during nacelle rotation.

A nested accessory reinforces exhaust pipes with controlled diameter ratios, improving form support, code compliance, and assembly efficiency.

A holder-mounted fitting that rotates and shifts along the hose relieves strain and torque, extending hose life and easing maintenance.

Pre-assembled gasket, clamp segments, and an insertion boundary simplify pipe joining while maintaining a fluid-tight seal.

Elastic hose support absorbs decoupling forces and limits cross-loading, keeping railway brake hoses suspended and reducing hanger replacement.

Top-load open channels and an expandable support frame keep a flexible catheter axially aligned during insertion while reducing mechanism complexity and cost.

A snap-lock plastic hanger uses aligned prongs and one screw or nail to support pipe slope, enable reuse, and damp vibration in tight spaces.

Interconnected hose clamps counteract differential-pressure torque to prevent rotation, leaks, and failures in hydraulic connections.

A poly-welded barrier seals the tubing annulus so test fluid can reveal pipe breaches, kinks, and dents before operation.