Pipe Supports TRIZ Cases

Inserted intermediate spacers keep dual inner tubes apart during foaming, preventing voids and thermal bridges in insulated conduit production.

A concave sliding support lifts concrete pump hose off pavement to reduce operator strain while preventing hose and surface damage.

Sliding and rotating cable guides improve routing in dense networking chassis by preserving bend radius and separating optical and electrical cables.

A hinged pipe collar uses non-circular lugs and a toggle clamp to change diameter without separating sections or losing parts.

A set screw scratches the tube outer surface to lock slip-fit tubing in place without narrowing the bore, enabling dense, low-cost fluid connections.

Cross-wound glass-fibre thermoset layers improve adhesion and mechanical protection on thermoplastic-coated metal pipes during trenchless laying.

Tubular sleeves let A&R wire pass through pipelay clamps without pad removal, protecting gripping pads and speeding subsea mode changes.

Oblique side supports and a load-bearing seat create a one-piece pipe clamp that resists deformation and slippage in vertical or horizontal use.

A tubular harness with anchor tabs consolidates bedside infusion lines to cut tangling, contamination risk, and nurse confusion.

Sliding support bodies on a profile rail let one stacking setup fit different lattice crane section diameters while reducing storage space.

A collapsible collar and bayonet fit secure aircraft fuel pipes through existing rib openings, cutting fasteners, tolerance issues, and assembly time.

Relief-hole soft projections deform more uniformly, helping a tubular clamp hold different diameters with steadier fixation and vibration damping.

Snap-lock ganged conduit supports cut concrete-form installation time while keeping cable pathways secure and open after curing.

A repositionable tension holder secures robot-arm hoses and lines quickly while preserving working range and reducing collision risk.

A sleeve retainer with barbs or O-rings holds and protects polymer liners during transport while preserving a tight pipe-end seal.

A rotatable two-plate bracket clamps onto T-bar beams faster while holding sprinkler heads against side and torsional forces.

Sliding-bearing support lets press heating lines expand with pressure plates, reducing hose stress, leaks, and chip contamination.

A U-shaped snap-fit bracket and rotating pipe seats simplify drop hose mounting, improve rod attachment durability, and speed spacing adjustment.

Threaded inner and outer casings adjust sprinkler head height and orientation quickly, cutting install time in variable drop ceilings.

A positioning and protecting base shields the tank truck sampling output port from impact while keeping hose connection access intact.

An angled support base creates an insulated underfloor housing that secures cables and pipes near the exhaust crank without added interfaces.

A pivoting stake and friction-fit clip keep a downspout extension off the ground to avoid grass damage, freezing, and mower interference.

A guided connector limits coil and hose movement to vertical travel, cutting bending stress, vibration, and fitting failure in waterjet delivery lines.

Nested air ducts inside fuselage hollow beams cut hose leakage and installation space while simplifying aircraft duct repair and maintenance.

A threaded perpendicular fastener lets pipe support fittings match variable mounting distances while staying secure under movement and dynamic loads.

A rim-mounted housing, shaft, and base route aquarium air hoses to bottom exits, hiding clutter while keeping installation simple.

A moveable head and lug let the tie deform around varying hose diameters, improving contact pressure and reducing leaks.

Bolt-set friction in a three-plate slide bearing support restrains pipe vibration while allowing thermal expansion and contraction.

Rotating rings and a perpendicular frame axis secure hydraulic lines while relieving torsion, reducing pinching, pressure drop, and hose strain.

Pivotable, releasable bend restrictor elements protect flexible pipes from over-bending while lowering tie-in loads and easing subsea installation.

Pre-installed riser clamps and a robotic arm automate MUX cable attachment, cutting installation time and reducing human exposure offshore.

Folded lock tabs stop nut rotation in pipe hangers, resisting vibration loosening and allowing quick visual inspection in ceiling installs.

A spring-loaded pawl clamp lets an air hose move one way while a hook suspends the tool, preventing retraction, tangling, and hand strain.

A vertical-and-inclined flexible hanger layout supports soffit-mounted components while damping vibration and easing seismic installation.

Concentration-specific syringe markings and color cues reduce unit-dosing errors when reconstituting and administering dry-form injectable drugs.

A coated foam-and-metal pipe support pad resists weather, humidity, vibration, and leakage while keeping large pipes stable on uneven ground.

A rotating comb and pin support holds heat-exchanger pipes against vibration while allowing thermal expansion with low mechanical stress.

A t-joint connector with flexible conduit drainage and bracket support cuts sprinkler footprint in tight freezer and cooler ceiling spaces.

Adjacent clamping bodies and a spring-like tensioning base simplify fiber insertion while keeping optical fibers securely positioned with low force.

A compressible clamp secures hydraulic hoses away from machine contact points, reducing rubbing, wear, and premature failure.

An intermediary adapter extends watering reach while preserving fluid pressure stability and reliable connection across different sprayers and handles.

A grooved spacer and bending sleeve keep coaxial tubes spaced, crimp-locked, and electrically grounded without collapse during bending.

Segmented housing and adjustable fasteners pre-position gasket sealing lips for reliable axial pipe joining with a fluid-tight seal.

Prefabricated bolted tunnel duct supports follow tunnel curvature, cut welding and assembly time, and improve maintenance access.

Rotating rollers and a wide leg support structure let heavy piping move axially during thermal expansion while reducing tipping, stress, and wear.

A rotatable saddle and fitting bore keep pipe fittings stable and sealed during tapping, even on variable pipe surfaces and under pressure.

A pivot clip keeps coupling segments evenly spaced, allowing pipe insertion and single-side tightening when one end is hard to access.

Engagement surfaces and rolling contact help umbilical cables pass through bent pipes with lower friction and tension while maintaining inspection data flow.

An adjustable stand with macro and micro height control supports uneven pipe runs, reduces wear from thermal expansion, and simplifies cap replacement.

A three-position end-hose holder secures the hose in travel mode, then pivots clear to prevent boom interference and accidental locking.