Pipe Supports TRIZ Cases

See how internal expanding structures tension fabric duct walls to prevent sagging when deflate

See how a magnetic detent and ferromagnetic target resist tool trolley drift along assembly rai

See how a third rail and supporting structure together support two portions of the second rail,

Two-plane base blocks and retainers seat and constrain vehicle hoses, lines, and harnesses for repeatable installation across complex layouts.

See how a polymeric support block with U-shaped recess and integrated clamps reduces roof damag

See how a wavy fleece surface with macroscopic relief structure increases contact area and hold

See how an annular exhaust adapter nests a new exhaust tube inside an existing pipe, preventing

See how a segmented bracket assembly with nested compressor accommodation and pre-installed dam

See how an internal raceway segments wiring, outlet housing, and cord storage to protect outlet

See how ridge portions on the inner pipe create segmented contact points that prevent resonance

See how a multi-arrangement fastening mechanism enables one-handed axial positioning and secure

See how collapsible hoops and distributed hangers keep pliable air ducts taut when deflated, pr

See how a third rail and perpendicular supporting structure together support two portions of th

See how boss protrusions on an underlayment base frictionally secure heating wires, enable adhe

See how a wrap spring unit enables adjustable clamping force and easy repositioning on rods of

See how an elongated slot and nut receptacle enable adjustable attachment positioning on standi

See how a clamp assembly enables dynamic solar panel tilt adjustment through pivot mechanisms,

See how an adjustable housing bracket with curved supports protects embedded tubes from constru

See how a clamp assembly with pivoting torque tube enables independent solar module angle adjus

See how a wall-integrated gas raceway hides piping, vents leaks above the ceiling, and supports

See how a heat transfer device recovers lost heat from the supply pipe to the return pipe, redu

See how a circumferential support structure with projecting retention walls secures cables to r

See how a resilient-member connection device uses elastic force and asymmetric blocking to enab

See how side flanges with shear-resistant elements prevent cupboard misalignment and falls unde

See how a pipe clamp with multiple recesses secures pipes of varying diameters to mesh reinforc

See how integrated holding devices on the outer wall route the drain hose externally, eliminati

See how a flexible cable guide with decreasing radius of curvature prevents cable damage during

See how a blockage element with locking channel prevents gas pipe rotation during mounting, ena

See how hook-and-loop mechanical fastening reduces tube installation time and enables flexible

See how an elastic holder with movement-preventing protrusions secures the drain hose to the ca

See how straight metal tubes with curved foam inserts guide drying air efficiently, cutting man

See how an elongated umbilical with internal passageways routes power and water lines through v

See how snap-lock telescoping links enable manual adjustment of air hose separation distance to

See how a conical indentation and flow channel in an intermediate element enable leak detection

See how pressure mats and ultrasonic sensors enable automated desk height adjustment based on u

See how a snap-engagement receptacle secures gas hose quick disconnect fittings off the floor d

See how pivotable arms and flexible bands replace hydraulic cylinders to secure monopiles of va

See how wiring harness guides maintain predictable loop radius in appliance drawers, reducing s

See how biometric sensors and adaptive control enable a sit-stand desk to personalize height sc

See how a wiring assembly mounted above the work surface eliminates drilling, preserves usable

See how individual wire pre-tensioning eliminates twisting and coiling in parallel wire cables,

See how rectangular grooves and fastening elements in facing bricks simplify pipe installation

See how a bracket with pivotable jaws secures wiring 1.25 inches from the wall to prevent faste

See how a wall-mounted remote control holder uses flexible arms and integrated channels to secu

Straight metal tubes with internal foam or plastic elbow inserts cut fixture cost while limiting pressure loss and supporting fast air drying.

Bosses on an underlayment base hold heating wires in place while openings let adhesive layers bond for more even floor heating.

Biometric and pressure-mat feedback adapts sit-stand timing to user fatigue and activity, improving movement compliance and comfort.

A frame-mounted clip replaces brittle nylon ties by securing photovoltaic wires at multiple angles with longer outdoor service life.

An elongated base and spaced saddle connectors route wires in straighter lines while reducing adhesive failure and installation effort.

A rotatable cable cam inside the cleat guides heavy high-voltage cables with less friction, reducing external roller use and installation time.

An integral roller and rotatable clamps let high-voltage cables move through the cleat with less friction, reducing installation effort and time.

Integrated ball transfers cut friction in a high-voltage cable cleat, guiding cables during installation without external rollers or machinery.

Quarter-turn fastening and preformed passage holes let cables be secured quickly to a primary structure with less manual handling.

A one-way lock and integrated slack opening keep solar panel wires tight, supported, and protected from sagging and weather-related damage.

An elongated base and saddle rail replaces separate cable tie mounts, improving wire support, routing flexibility, and attachment reliability.

A bent fixing extension and claw lock keep the holder engaged in the cylinder opening, reducing pullout during wire winding.

Flexible joints between inner and outer clamp ring structures absorb pipe vibration while enabling one-piece molding and tunable damping.

A corrugated sheath with asymmetric bending contains abrasive particles, supports 3D cable motion, and reduces cleanroom cable-guide complexity.

An integrated cable tie and multi-cradle fixing holds components during routing, cutting repeated strapping and installation time.

An integrated elastic locking fastener clamps supports one-handed, avoiding screws, debris, and misfastening in tight aircraft spaces.

A separated retainer and cable tie hold varying diameters without direct contact, reducing abrasion and heat transfer above 100°C.

Elastic retaining arms and rotatable side portions let one collar securely hold different cable or tube diameters while reducing PIM.

Inserted compensation elements let fluid connectors shift in x and y while staying fixed in the holder, preventing detachment under transverse loads.

Asymmetric protrusions and grooves lock wire orientation during coupling, reducing distortion, connector complexity, and disconnection risk.

E-shaped cable holder fingers secure communication cables on studs without tools, improving stability and preventing cable or drywall damage.

A one-way roller lock secures solar panel wiring along shorter paths, managing slack without jacket damage or weather-driven failure.

Pivoting nested segments cradle sewer, water, and power hookups in one organizer, improving drainage support and compact storage.

Sliding frame attachments on a rigid beam let elongated media mount easily on different vehicle frames while limiting deflection.

A grooved cover and movable blocking device let underwater cables be inserted without pulling through the tube, reducing stress, friction, and wear.

Opposed adjustable clamp elements and spring spreading enable translational insertion into undercut channels where pivoting space is limited.

Segregated cable channels in FRP crown molding prevent damaging bends, support secure hardware mounting, and improve lighting efficacy.

Separate cable cavities and numbering keep thermocouple bundles organized, untangled, and easy to transport or replace.

An insulated clip assembly creates direct bus bar to coolant conduit contact, improving heat transfer while maintaining secure routing and electrical isolation.

An elastic return element replaces bulky reset rollers, letting a 3D robot line guide retract excess length without sacrificing motion space.

Dust-tight closure profiles let cleanroom conduit lines be inserted or replaced laterally, cutting particle release and maintenance downtime.

A hard-frame and soft-grommet fairlead uses double tongue-and-groove engagement to maintain water-tightness and strain relief under stress.

A docked magnetic wire connector lets users charge high window blind batteries safely without ladders, long cords, or hard-to-reach motor access.

A spring-supported cable harness adapts to vehicle cornering, limiting sag and damage while keeping cable routing compact.

A double tongue-and-groove form-fit locks soft grommets in a hard frame to maintain cable strain relief and IP6X-tight sealing under stress.

A clip-on bracket with hanger portions and cradle arms secures solar cables on workpiece edges while limiting rotation and preventing cable damage.

Vehicle vibrations and impacts are turned into added clamping force by a resilient support clip that keeps tubular components from shifting.

Stabilizing members and a slack-to-taut tying section help one hanger grip multiple cable sizes and resist wind-driven side loads.

Elastic deformation regions let one wire clip snap into different groove sizes while resisting rotation, sagging, and dislodgement.

Separating wires inside a conduit creates sealant space for precise injection, enabling faster, repeatable sealing with better adhesion.

Nesting redirector parts and bolted joints replace welding, reducing assembly time and shipping volume while preserving cable tray grounding.

Modular internal and external rollers cut friction, abrasion, and buckling when pulling cables through bends, conduits, and tight spaces.

An integrated adhesive receiving clip secures cable harnesses to vehicle bodies without tape or ties, cutting assembly time and part count.

A pre-applied adhesive receiving surface secures cables and wiring harnesses directly to vehicle bodies, cutting assembly steps and part variants.

Connector housings let a tubular body cross cracks and expansion joints while absorbing movement and stress to prevent cable rupture.

An attachment clip reroutes and grips the wiper motor harness to break capillary water flow into the connector, reducing oxidation and short circuits.

An open annular cable support with self-locking jaws speeds secure aircraft cable installation in cramped spaces while reducing tool steps.

A spring-loaded clamp with rotatable brackets and clips secures medical tubes while preventing tangling and easing patient transport.

A hidden scannable marker becomes visible only after hose attachment, confirming correct coolant hose positioning and reducing kinks or damage.

A slotted bolt, yoke, and strap simplify cable cleat installation while securing different cable sizes against short circuit forces.

A low-profile interlocking strap and buckle secures polymer tubing on skin while reducing dislodging and mechanical occlusion.

A profiled guide strand replaces rigid side-wall troughs to keep an articulated line guide on course with lower installation cost and effort.

Sliding bobbins and removable gate plates keep conveyor emergency cables tensioned while reducing pull distance for faster stop actuation.

A rotatable coupler lets liquid-cooled EV charging cables turn inside the holder, improving handling while reducing clamp damage.

Pinned jaws, bearing surfaces, and a threaded fastener secure the seismic brace end and inhibit rotation to prevent disconnection during seismic events.

Monolithic pipe-clamp projections and deformable segments maintain pipe grip under vibration, settling, and seismic movement.

A two-stage holder corrects stretched male connector neck misalignment to ensure full fastening and uninterrupted chemical supply.

Rotatable eccentric bushings let tube clamps align without match drilling, cutting assembly time and foreign object debris risk.

A one-piece fixation uses tube insertion to trigger locking, securing coil heat exchanger tubes without extra parts and supporting automated winding.

Pivoting Mecanum rollers cut drag while allowing controlled pipe-string rotation in HDD reaming and installation beneath obstacles.

Adjustable low- and high-pressure manifolds cut hose clutter, improve equipment access, and support safer well fracturing setup.

A one-piece extruded rooftop support removes on-site assembly, cuts installation cost, and improves uniform wear and structural strength.

Automated feeding, cutting, and polishing of tie-rod stock reduces hand-tool exposure, material waste, and vibration-related HVAC failures.

Rotatable rings and a pivoting frame support hydraulic hoses while reducing torsional strain, dislodgment, and pressure-drop issues.

Pinchable flanges and a flexible hinging zone let this plastic pipe clip open with one hand and mount pipes in multiple orientations.

Staggered arc support sections guide pipe insertion with low force while resisting axial sliding under vehicle vibration.

An adjustable scaffold claw shifts relative to the coupling device to expose blocked maintenance areas without moving the whole platform.

Modular conduit tracks organize disposable tubing into clean, swappable flow paths that cut setup complexity, downtime, and sterilization burden.

A slotted wire retainer secures guidewires and catheters to prevent contamination and tangling while allowing guided exchange.

Recessed spacer sections keep sequentially tightened straps effective, improving clamping distribution and pipeline bundle stability.

Sensor nodes and pan-line transceivers detect bretby dislodgement risks early, enabling remote alerts and less hazardous monitoring.

Moveable low-friction pipe supports let submerged cooler piping expand without abrasion, protecting oxide layers and seawater flow.

Detachable manifold units create flexible water supply paths while reducing transport weight and connection effort in tight spaces.

Independently compressible comb teeth seal around varying cable bundles in an IHS chassis to block hot airflow recirculation and hold inlet temperatures.

An elastic return mounting assembly holds turbine housing cooling tubes at minimal clearance, improving cooling while avoiding contact during expansion.

A one-piece worm gear strut clamp cuts alignment and part-handling effort while securing various pipe sizes against vibration.

A removable locator tab holds and aligns the clamp band on the hose, cutting assembly time while preserving sealing and hose conformance.

A pivoting leg stand holds a conduit at adjustable angles, keeping the fluid stream stable so hands or objects can stay in the flow.

Separate freight, utilities, passengers, and pedestrians into stacked city levels to remove traffic conflicts and speed urban movement.

Pivoting rings with different leg lengths hold a fuel hose in a downward slope to improve flow and reduce manual support risk.

An adjustable keeper with multiple clamping surfaces secures fiber cables of different sizes and shapes while preventing slippage and misalignment.

Interchangeable clamps secure hydraulic hoses through the machine frame, reducing routing bulk, assembly complexity, and cost.

Interlocking block connectors secure flexible tubes of varying diameters to reduce tangling, snagging, and accidental disassembly.

Interconnected tubulars redirect excess stormwater from saturated drainage areas to lower fluid levels and help prevent flooding and structural damage.

A ratchet-pawl clamp with tapered grooves secures sanitary fitting flanges for fluid-tight sealing and easy sterile operation under pressure.

A radially compressible split ring in a groove simplifies pipe joining while maintaining sealing and resisting pipe separation.

Inner and outer annular grooves with rotating support rollers keep hydraulic lines ordered and unwound during shield machine rotation.

A nested housing and guard plate hide U-bolt nuts, securing a lockable key container to poles while limiting unauthorized removal.

A detachable railing-mounted water outlet delivers stable hose access on decks or balconies without surface damage or permanent installation.

A rotating locker protrusion and spring lock the cam lever against reverse movement, securing sprinkler fixation without slow bolt fastening.

Four-directional beam channels let truck bed assemblies attach and slide components smoothly without welding or drilling.

An elastic compensating member keeps a pipe-mounted strap under tension as the pipe shrinks, preventing secured elements from shifting over time.

A recessed saddle and hollow support structure hold pipe sections securely during assembly while cutting weight, damage risk, and storage burden.

Retention geometries lock the rubber profile to the clamp band without edge loading, easing assembly while preventing clamping damage.

An elastic U-shaped connector links two cartridges into one cassette, simplifying pump installation while preserving tube positioning and dosing precision.

A spacer between the pipe and U-shaped support spreads load, prevents insulation crushing, and makes insulated pipe installation easier.

Curved elastic plates inside a two-part duct holder damp vibration uniformly, reduce wear, and fit varying duct diameters without redesign.

Added rail or friction-slide support stabilizes extended cable management arms, protecting longer heavy cables from damage in racks.

Dielectric L-shaped brackets and polymeric hangers secure antenna cables on poles while limiting passive intermodulation and wind sway.

Curved appendages and a U-shaped bracket lock a vertical drop hose to an irrigation rod with fast mounting, repositioning, and durable support.

A continuous fluid pipe mounted outside wing ribs cuts joining steps, simplifies wing box assembly, and eases maintenance.

An angled snap-on bracket mounts sprinkler supports to T-bar grids, preserving ceiling tile clearance while resisting torsional loads.

Sliding link members in T-shaped guide formations limit pipeline bending while avoiding tension stress and component failure.

A sliding frame-and-connector layout lets plumbing boxes rotate and stack while keeping supply and drain line access secure and fastener-free.