Pipe Supports TRIZ Cases

Surface slits on the cable tie tail allow manual detachment by twisting, preserving load-bearing cross-section strength.

Adjustable mounting fixtures with overlapping circular passages allow the brace to transition from loose installation to tight seismic restraint.

An adjustable mounting plate with perpendicular fastening elements enables precise height positioning of concealed plumbing fixtures.

A boom guard assembly with a polymeric layer stabilizes pipe sections during transport.

Segmented discs and bridge pieces enable variable rotation between clamp bands, reducing manufacturing complexity.

An elastic membrane seals fluid channels in a slide valve, eliminating dead volume contamination and ensuring precise flow control.

A flexible cable support apparatus uses a single-piece wire stock spine to define a longitudinal passageway for secure cable retention.

Coupled rink chair support sections reduce movement between segments to maintain proper spacing for cooling pipes and reinforcing bars.

A seismic bracket secures conduits using close-spaced sides and stackable design.

A cable tie features a pawl hole and movable portion that engage to secure objects while storing excess strap material.

A spring-biased cable chain return system organizes conductors into sequential folding curves during chassis insertion.

Adjustable screw mechanism secures nuts into fuel hose lines, preventing metallic jacket diffusion and protecting workers during assembly.

A hose holder system uses a flexible sling to support heated liquid hoses without rigid contact.

Integrated holding members secure cables within multi-joint links, preventing abrasion while reducing inertial force for precise positioning.

Separate seats and flexible hinges eliminate the need for precise initial positioning of coaxial wires on supporting cables, simplifying installation.

Slurry provides buoyant support and lubrication to maintain grade accuracy, preventing dips and sags in gravity flow sewer pipes.

A dedicated compression member transfers seismic forces away from the hanger rod, eliminating destructive compressive impacts on the supported conduit.

An integrated mounting bracket with molded bosses electrically isolates the conductive faucet from the sink deck to maintain capacitive sensing performance.

A segmented standoff with flexible connectors creates a temporary gap between a pipe and its support.

An extendable cable management device increases arm length via a movable auxiliary member, accommodating longer cables without occupying excess rack space.

A resilient clip with bendable side walls secures flexible armored conduits to structural objects using a snap-fit mechanism.

A cable fixing member uses arc-shaped convex and concave fitting parts to rotate bracket members, allowing easy opening and closing for secure cable holding.

Folded ribs in a single blank reinforce the bracket, eliminating welding and reducing manufacturing time.

A rotating air hose hanger mounts to rail car couplers using a pivot joint that accommodates movement.

Multiple curved segments distribute clamping force evenly, preventing stress concentration during thermal expansions.

An elastically deformable hollow tube aligns and retains an electrical wiring harness within a support aperture through interference engagement.

A trencher boot guides three cables through an orienting structure into a V-shaped configuration for direct burial.

Segmented tray sections with dynamic slider brackets resolve installation complexity by enabling flexible alignment without cutting or reassembly.

Inclined hose tray stores large diameter drain and vent hoses using spring-powered retracting mechanisms to prevent fluid leakage from previous operations.

Guy wires and a tension reel suspend conduits above the ground, preventing dragging and kinking during tandem slider movement.

A cable guide apparatus uses a locking tab to secure wires along support structures.

Segmented linking members rotate under trampling stress while elastic belts restore original alignment.

A rotating wall-mounted tube holder secures conduits via an elastic clamp mechanism.

Segmented synthetic resin blocks prevent abrasion powder scattering while maintaining structural rigidity for reliable cable protection.

Segmented support shells anchor via radial screws to transmit loads, preventing vapor barrier tears from thermal expansion.

A substrate support system with a cover plate and utilities feed manages gas flow within limited physical space.

A transponder embedded in an energy chain guide changes electromagnetic behavior upon reaching a wear limit, enabling contact-less deterioration monitoring.

Slideway elements guide pre-assembled aircraft ducts into the fuselage, bypassing complex butt-jointing in confined triangle regions.

A hydraulic cylinder manifold mounting portion with fluid passageways and apertures for flexible positioning.

A flexible neoprene sleeve with hook-and-loop fasteners secures accessory cables without disconnecting them.

Conduit spacer arranges power cables in a triangular configuration to achieve phase cancellation effects.

A mounting guide with an extendable box member positions gang boxes accurately on wall structures.

Adjustable delivery lines and fixation brackets enable flexible configuration across engine shapes, resolving inflexibility in traditional designs.

Friction-reducing wheels on a clamping device distribute pulling forces to prevent cable damage during long borehole installation.

Polygonal clinch connection joins clamp band to mounting element via cold-forming, enabling mixed-material assembly without thermal welding.

Sawtooth outer ribs on elastic plugs enable easy cable insertion while inner ribs guide alignment and maintain sealing integrity.

Curved fins redirect exhaust air laterally around a support stand, preventing recirculation into inlet vents.