Pipe Supports TRIZ Cases

Segmented pins with biasing members prevent thermal deformation of optical scanner housings.

Segmented rolling bodies guide welding wire through curved paths, reducing friction and preventing tension buildup during insertion.

Rotatable upper and lower support blocks on a flexible plate disperse load to prevent transmission line sleeve sagging while reducing friction-induced noise.

An annular groove accepts a guide tab on the coupling clip, preventing loss and damage during transport.

A wedge retention apparatus with a deflectable spring stabilizes jet pump assemblies against vibration-induced wear.

A beam clamp uses a torsion spring to pivot a rotational portion for secure attachment.

Telescopic legs nest within each other and lock via a fastening screw to stabilize cable ducts against wall deviations without adding underlayment.

Cuttable bracket bases allow retrofit installation of cable trays that prevent conductor sagging and maintain data transmission quality.

Fire-retardant plastic cable tray with snap-fit couplers reduces weight while maintaining structural strength.

A flow cell fluid reservoir uses a projecting foil layer bonded to a support surface via fusible coating.

External welding on junction forgings simplifies undersea pipeline assembly and reduces fatigue risks.

Segmented pole engagement portions clamp via biasing force, resolving the trade-off between storage capability and assembly complexity.

A one-piece formwork box uses integral sealing discs and flexible rosettes to guide protective pipes through concrete.

A wireless pipeline inspection system overlays distance data on video feeds for real-time monitoring.

A metal flexural fixation member surrounds a fuel filler pipe to apply stable holding pressure, suppressing rattling caused by resin creep deformation.

A pipe suspension bracket uses an overlie part and bridge hole to secure pipes against profiles.

LEDs illuminate a cable ramp through a translucent rotatable lid to prevent tripping in dark conditions.

An elastic support plate absorbs differential thermal expansion between the aluminum cylinder head and steel manifold to prevent exhaust leaks.

A harness protector crushes wire harnesses into an oblate cross-section to resolve axial load instability and improve wiring operability.

Integrally molded synthetic resin cable guide suppresses lateral shifting of side walls while maintaining easy access for cable examination.

Bent wire rod support members in a cable rack create large open spaces that reduce shielding area and improve heat dissipation.

A co-extruded electrofusion strip uses conductive plastic to deliver homogeneous heat across the welding zone.

Radially aligned webs and retaining wings guide cables without tools.

An offset anchor bracket encapsulates toggle bolts within bored pedestals to secure pipe hangers.

Dual-side fitting grooves enable flexible assembly of structural channel framing, eliminating permanent welding to improve disassembly and modification.

C-shaped retaining brackets constrain tablet motion while allowing lateral edge access, resolving rigidity and accessibility trade-offs.

A polyester webbing sling device secures tractor trailer hoses and cables in a stationary position.

Overlapping flanges on engine and cooling hoses direct rainwater away from the engine compartment, preventing water intrusion along hose surfaces.

Segmented hanger structures with diverging adhesive panels replace labor-intensive duct tape, accelerating installation of drying systems.

A segmented seal system fastens to outer and inner casings to create a fluid-tight annulus for reverse circulation cementing operations.

A magnetic bracket attaches communication equipment to steel structures using embedded magnets.

Flexible bellows and universal joints absorb longitudinal displacements in rigid piping, preventing rupture while maintaining a straight configuration.

Pre-marked hanger indicators enable accurate pipe installation without external measuring devices, reducing time and waste.

A port connector securement device uses projections to engage USB ports and prevent unauthorized removal.

A twisted clamp joins a spiral hanger to a support wire using integrated clamping portions.

A modular elastomeric pipe support uses interlocking teeth to wedge the top into the base for secure retention without additional fasteners.

Interleaved hinge leaves house conduits for wires, preventing structural compromise while enabling omni-directional movement.

Segmented elastic design prevents cable slippage in automotive brackets while maintaining simple manufacturing.

An angled attachment flange mounts a cable trough to rack structures, securing media cables against sagging.

A pivotable wire guide cover engages the link body on the inner bend side to maintain secure attachment during cable movement.

Interposing a metal mounting bracket between resin holding portions reinforces structural rigidity while reducing overall component size.

Coaxial passages in a stuffing box flow diverter separate injection and removal streams, reducing flush water consumption while maintaining pressure.

Segmented perforated tubing adapts to irregular landscape shapes while reducing evaporation losses.

A cable tie fastener uses a ratchet mechanism to lock onto electrical connectors, resolving the trade-off between connection strength and adaptability.

Spacer elements between the cover and cable guide absorb impact forces to prevent contact conductor damage during wheel assembly.

A vertically mounted support device guides hoses and cables along the tractor frame using elongated members.

Segmented locking arms flex during insertion to resolve the trade-off between installation ease and retention reliability.