Adhesive Processes TRIZ Cases
- Jelly-Roll Battery Fixing Tape That Releases to Fill Cell Gaps
Electrolyte-weakened fixing tape lets a wound electrode assembly expand, fill cell gaps, prevent movement, and lower battery resistance.
- Flexible Shielded Ribbon Cable Assembly for Precise Conductor Spacing
Automated foil joining with rollers and a linear actuator stabilizes insulated conductors for denser ribbon cables and better impedance control.
- Display Panel Bonding Dam for Bezel Gap Adhesive Control
An angled UV-curing dam keeps low-viscosity resin out of bezel gaps during transparent panel bonding, reducing shorts and contamination.
- Surface Activation Bonding With a Sacrificial Species Layer
A deposited sacrificial species layer is fully consumed during ion bombardment, preserving surface composition and bond strength.
- Display Panel Bezel Dam Curing to Prevent Adhesive Leakage
Angled UV curing forms a resin dam at the display panel bezel gap, stopping adhesive leakage that can cause shorts or optical contamination.
- Photocurable Resin Composition for UV Blocking Without Yellowing
A specific UV absorber and photoinitiator balance 385 nm blocking with low yellowness, transparency, photocurability, and adhesion for displays.
- Printable Structural Adhesive for Fast Large-Area Bonding
A low-viscosity printable epoxy adhesive enables fast, precise large-area bonding and sealing while maintaining structural strength.
- Ribbon Laminate Adhesion Structure for Cylindrical Honeycomb Cores
Dual curing adhesives let honeycomb ribbons expand into cylindrical cores without saddle deformation, bent cell walls, or lost shear stiffness.
- Laser-Textured Aluminum Bonding Layer for Stronger Adhesion
Pulsed-laser surface texturing and isocyanate adhesive bonding strengthen adhesion on aluminum members beyond roughness alone.
- Back Cover UV Tape Bonding for Reliable Bezel Assembly
UV-curing tape bonds the back cover ink layer to the middle bezel, raising shear strength while simplifying assembly and lowering processing cost.
- Anaerobic Sealant Thread for Leak-Resistant Threaded Joints
A flexible thread coated with anaerobic sealant seals and locks threaded joints against vibration, corrosion, and dynamic-load leakage.
- Adhesive Dispensing Nozzle for Corrosion-Protected Pipe Joints
A shaped nozzle applies a uniform adhesive layer on male pipes, combining joining and corrosion protection in one faster HVAC assembly step.
- Anaerobic Thread Sealant for Leak-Resistant Pipe Joints
A solid anaerobic coating on flexible thread seals and locks threaded joints under heat, pressure, and vibration without re-torquing.
- LOCA Assembly for Thin Components Without Clean-Room Processing
UV-cured LOCA and a release liner support precise thin-component placement without costly clean-room steps, masks, or complex tooling.
- Silane-Functional Acrylic Sealant Composition for Class 50 Joint Movement
A two-stage silane-functional acrylic dispersion boosts sealant joint movement and adhesion to meet ASTM C920 Class 50.
- Ribbon Laminated Honeycomb Core for Cylindrical Shaping Stiffness
Rounded adhesive geometry lets honeycomb cores form cylindrical shapes without saddle deformation or loss of shear stiffness.
- Laser Carbonization of Print Layers for Glass Separation
Laser carbonizes the print layer between glass and adhesive, enabling fast sheet-form glass separation without damaging the adhesive.
- Bi-Material Putter Shaft Mass Distribution for Speed and Stiffness
A bi-material putter shaft shifts mass to the head and butt to cut weight while preserving stiffness, durability, and club head speed.
- Hot Melt Adhesive Flow Tracking at the Manifold Level
A single manifold flow meter with product detection tracks total hot melt adhesive output per product while cutting meter count and maintenance.