Lamination Ancillary Operations TRIZ Cases

Rotational slicing cuts foam insulation cleanly, reducing wear and operational costs.

Chlorinated polypropylene primer resolves poor adhesion of aqueous inkjet inks to oriented polypropylene films, preventing packaging breakage during handling.

Projecting a plasma flume near the compaction nip provides uniform heating across complex curved surfaces, resolving uneven thermal distribution issues.

An intermediate polymer layer protects reverse printed ink from moisture and grease migration in woven bags.

A low-adhesion coating on ink chamber surfaces separates frozen ink from actuator membranes.

Embedding the structuring layer within the support matrix resolves lamination strength issues while maintaining air permeability for efficient drying.

Thermoforming composite fabric with high softening point polymer core and PVC sheath for automotive equipment parts.

A high temperature grinding and dicing tape supports ultra thin wafers during backside processing.

UV-polymerized microtruss cores replace solid materials to lower beam mass while maintaining flexural rigidity and energy absorption during collisions.

Stiffening films mediate ion implantation transfers to prevent blistering on flexible substrates, maintaining structural integrity for microelectronics.

A method for producing continuous lengths of flexible ballistic-resistant laminates by bonding individual sheets of lightweight anti-ballistic materials.

Segmenting non-tearable foil into isolated patches resolves the contradiction between structural strength and clean break consistency during transfer.

A casting support with controlled adhesion forces enables paint film application, while an extraction support peels the layer for transfer.

Bonding graphene films with low-volatile adhesive resin and burying surface roughness in a transparent layer reduces haze values.

Laminating cotton and wood wicks with a wax coating resolves flame height inconsistencies caused by natural wood variations.

Segmented rigidity in a friction stirring pressing shaft cancels opposing moments, suppressing unevenness while preventing shaft damage from excessive pressure.

Acid post-dip treatment prevents copper oxide dissolution during metallization to stop delamination.

A method for manufacturing thick polyimide film uses laminated polyamic acid gel layers to achieve high processing speeds.

Resilient sliding shoes on pressure lamellae adapt to fiber layer surfaces while reducing friction via compressed air channels.

SEBS penetrates fabric interstices to consolidate a transparent laminate, resolving ink adhesion and durability issues while maintaining water repellency.

An offset anchor creates a preliminary peeling action that sequentially exposes segmented setae, reducing release force and preventing skin discomfort.

A method for forming polymeric laminated wafers using infrared heaters to selectively soften distinct film layers at different temperatures.

A decorative film structure uses a dotted metal luster layer and an achromatic gap filler to create a soft metallic shine.

Tumbling green chips creates uniform open surfaces for side ceramic sheet adhesion, reducing protective area dimensions while preventing short-circuit risks.

Continuous roll production cuts optical film to precise lengths for direct bonding.

Selective laser irradiation removes catalyst residue from the fuel cell membrane while preserving the required catalyst layer and preventing membrane damage.

Inverting the air-to-polymer interface reduces reflection losses and power consumption while enabling thinner backlight designs.

Segmented base materials in a flexible display back film resolve the trade-off between AOI transparency and bending resistance.

Coextruded biaxially oriented composite film with a strippable sacrificial layer protects the substrate surface during storage and transport.

Antenna radiator with cable troughs and inserted protruding metal strips extends current paths to increase operational bandwidth.

Segmented wire reinforcement creates non-wire zones for safe drainage hole drilling in kink-resistant medical tubing.

A multilayer structural adhesive film with a porous layer enables robust bonding and sealing of automotive hem flange connections.

A printer thermal head divides heating elements into independent groups to apply selective thermal energy.

A pre-embossed carrier film transfers a precise inverse profile to fixable material, eliminating high voltage requirements from non-uniform alignment.