Large Containers TRIZ Cases

Sewn reinforcement straps eliminate sling requirements, preventing tears and ensuring stability during heavy load transport.

Silicone elastomer particles in a polyurethane matrix prevent residue adhesion, enabling easy peeling and eliminating complex mechanical cleaning.

Plasma generation oxidizes ethylene to harmless byproducts, eliminating ozone-related carcinogens while extending perishable goods shelf life.

Leverage structures tension flexible panels on support frames, enabling inspection access without compromising structural integrity.

A single-piece cargo net uses ratchets to tighten straps for secure load holding.

Bevelled surfaces on the transport container roof guide forklift arms to lift the structure, eliminating dangerous manual handling steps.

Real-time sensors feed a computing algorithm that calculates evaporative loss, resolving the trade-off between measurement precision and system complexity.

Welded floor rails segment contact points to prevent freezing adhesion and act as slide members, resolving dumping difficulties in roll-off tubs.

A trough-like depression in vertical bars redirects buckling forces away from the inner container, preventing damage without adding corner reinforcements.

Opposing auger motors minimize torsional strain on the drive shaft while enabling cascaded granular material flow between storage units.

Thermal sealing creates a flat mesh floor that maintains uniform air pressure, preventing hose damage during container tilting.

Segmented compartments on a single base structure enable gravity-fed additive metering, eliminating manual handling dust.

Hinged orthogonal rails enable rapid size adjustment, eliminating multiple tank inventory needs.

Controls halftone dot area ratios to maintain uniform ink layer thickness and prevent neck wrinkling during processing.

An elastomeric drop tube with a tapered transition prevents aeration in engine cooling systems by maintaining submerged outlet flow.

Interlocking ceramic projections constrain piece movement during vulcanization, ensuring uniform joint width and preventing shear-induced peeling.

A twistlock assembly slides along a pin axis to reach a stowed position.

Nested bulk bag receptacles use inclined beams and lifting eyes to stack vertically, reducing storage area while maintaining structural strength.

Hard plate inserts and soft wear bars space the sliding frame off the floor to prevent direct contact erosion.

A foldable water tank uses a hinged frame to adjust its width for compact storage and transport.

A foamed polyamide cover floats on hydrocarbon liquids to impede thermal energy transfer and vapor emission.

Thin film polyethylene modules use ballast and pneumatic chambers to withstand wind forces while maintaining structural rigidity.

Continuous stiffening members and movable hinges resolve lateral force damage and folded height trade-offs in transport crates.

Powered winches and pulleys fold the structure to reduce transport space while maintaining standard compatibility.

Curved sidewalls lift the base over obstacles, preventing wear and maintaining integrity during dragging.

Segmented support points aggregate distributed weight data to maintain measurement precision without requiring a floating bunker structure.

Segmented reservoirs and atmospheric air injection eliminate complete refilling delays, optimizing compressed air usage for high-power shock wave generation.

A vertical storage container uses an airtight conveyor belt to load granular materials without generating dust.

A composite pallet underframe combines wood boards with plastic skids to support liquid containers.

Spirally fluted supports swirl backwash water to eliminate channeling and reduce chemical discharge in composite pressure vessels.

An external impactor transmits controlled radial vibrations via a hammer and strike plate to break up bridging material without damaging the container.

A gardening refuse container features a square rim with an internal arced strip for scooping material.

A fuel tank pressure relief valve controller monitors battery energy levels to manage depressurization operations.

A nested silo design uses a common central fluidization floor to merge inner and outer chamber discharge paths into a single unified outlet structure.

A wind-driven turbine powers a rotor to circulate cooling air inside rooftop water tanks.

Segmented perimeter sensors calculate inclination angles to prevent roof failure in flammable liquid storage tanks.

Slats with caps slide into corner and bottom rails to enable tool-free assembly while maintaining structural stability.

Rolling wheel assemblies and guide rails reduce friction during the loading and unloading of heavy equipment, simplifying single-user operation.

Controlled moisture content in a biaxially-oriented plastic container prevents creep deformation and carbonation pressure loss during pasteurization.

Segmented drainage paths activate automatically when primary systems fail, preventing roof weight overload and evaporation losses.

Segmented plastic overpack with integrated spill containment resolves the trade-off between structural reliability and stackability for large liquid containers.

A pallet base frame uses corner feet with stop bodies to create a defined bearing rim for supporting transport containers.

Rotating extension members drive the support frame upward while roller wheels enable horizontal movement, resolving mobility and stability trade-offs.

Curved platform bottom absorbs kinetic energy through elastic deformation, reducing weld joint stress while maintaining structural strength.

Angled sidewalls and inverted V-shaped retainers hold liners in place, resolving poor retention issues in standard residential recycling bins.

Elevates collapsible bulk material containers above blender inlets to enable direct gravity-fed transfer, eliminating pneumatic conveying dust and spillage.

A mechanical indicator device links a tank vent to a visual flag that rises as liquid fills the flexible collapsible container.

A continuous mixed metal oxide ribbon anode shapes into a serpentine path within compacted electrolytic backfill to distribute protective current.

A locking pin assembly engages a receiver via pivotable cam followers to secure stacked containers.

A double-walled hazard containment system uses a reusable corten steel outer shell and an inner liner to suppress battery fires.