Pipe Supports TRIZ Cases

Rib plates and recessed grooves cut pipe contact area while improving drainage and ventilation to reduce rust during storage and sea transport.

See how biometric sensors and adaptive control enable a sit-stand workstation to adjust height

See how slidable support brackets inside unistrut beams adapt to irregular vertical rod spacing

See how rotatably connected arms with toothed racks and a transmission element enable one-hande

See how orthogonal fins with through openings enable easy zip tie attachment for conduits of va

See how a pivoting user module on a patient support siderail resolves the ergonomic contradicti

See how a slidable mounting block with two independent fixing areas enables flexible fastener p

Segmented rib plates and recessed grooves improve drainage and ventilation in stacked steel pipe supports to prevent rust during storage and transport.

See how cutout-and-protrusion alignment features constrain hose movement to ensure even clamp l

See how a slidable mounting block with two fixing areas and spring arms enables flexible fasten

See how bayonet tabs, protrusion-recess locking, and conical sealing enable quarter-turn pipe a

See how a retractable vacuum hose uses in-wall engagement terminals with electrical contacts to

See how curved harness guides control cable loop radius and orientation to reduce flexing stres

See how a bendable member with limiting ribs guides drawer door cables through a preset track,

See how a segmented front-and-rear mounting device enables tool-free accessory attachment to ra

See how a holder with damping portions spaces the drain hose from the cabinet to absorb pump vi

See how a flexible retainer with aperture and flex axis captures manifold protrusions in keyhol

See how a clamp assembly with torque tube pivoting enables independent solar panel row tracking

See how a spring lock tab and hook-shaped projection replace screw joints in cable ladder carri

An integrated polymer-foam carrier insulates flexible temperature-control tubes while Velcro mounting simplifies installation without separate insulating layers.

See how a fibre duct with alternating soft and rigid portions and longitudinal fold lines repla

Snap-fit retaining profiles and adjustable spacers secure heat-exchanger pipes while adapting room cooling to varied ceiling layouts.

Replacing welded attachments with screw-fastened clamp sections simplifies solar tracker shaft support assembly and speeds manufacturing.

Curved support curbs and ceiling panels create a plenum that supports ductwork while containing hot- and cold-aisle airflow.

See how integrated cable guides and color-coded decorative members prevent power cable tangling

A water-resistant polymeric block replaces rot- and rust-prone wood and metal clamps, supporting varied conduit sizes while simplifying rooftop installation.

See how curved cutouts and integrated recesses constrain hose rotation and translation, ensurin

Independent cable fixation separates wall mounting from cable attachment, helping protect laundry-machine wiring from vibration and water exposure.

See how actuator-controlled valves in a reconfigurable duct lattice redirect airflow to hot spo

See how a rigid wire hanger with elastomeric isolators replaces complex sheet metal brackets, r

See how an adjustable clamp with curved saddle and snap-fit cap secures conduits of varying dia

See how a reversible cable support bar with segmented slots and U-shape attachments organizes c

Pivotally connected arm sets extend cable management across longer slide rail travel while supporting stable, sequential opening and closing.

See how an asymmetric anti-rotation section prevents the main gas line from twisting during ins

See how individually tensioning each wire to equal values eliminates twisting and coiling, prod

See how a sliding locking head and cable system enables vertical picture adjustment after wall

See how a locking sleeve with keying features secures heavy showerheads in position, prevents r

See how factory pre-assembly of HVAC terminal units with protective brackets and self-balancing

See how protruding wall portions extend stoppers in the depth direction to achieve compact hous

See how a portable hose retainer stand uses segmented slots and apertures to individually segre

See how insertable corner members with universal cradle bars eliminate custom cutting and wire

See how an adjustable containment frame merges aisle separation with structural support for pip

See how a Velcro-attached tube and welded carrier film prevent moisture penetration in radiant

See how a C-shaped profile in a single-piece wall bracket prevents axial pull-out of heating di

See how pivoting rigid routing elements and a deformable connector maintain cable organization

See how adjustable end frames and horizontal beams enable rack-mounted containment to support d

See how a composite clip with segmented retention features manages wires at various angles in s

See how a removable check valve in the steam passageway blocks food contaminants from entering

Partitioned clamp halves in a U-shaped solar cable bracket preserve free air space, avoid derating, and simplify installation.

Resilient friction and stop features secure different cable sizes and shift external loading to the enclosure, protecting internal components.

A shaped base plate and stainless strap secure trefoil cables on closely stacked wire baskets while limiting height and protecting insulation.

Undercut clamping plates and modular strain relief simplify cleanroom cable assembly while reducing abrasion and particle shedding.

Molded plastic arcuate arms with ratcheting engagement secure vehicle tubing across sizes while cutting clip weight and production cost.

A movable base and fixed adapter let cable or pipe connectors align precisely on support structures, cutting installation effort and extra parts.

A flexible outer belt and inner liner contain power cables during short circuits, limiting lateral spread and damage without extra attachments.

A horizontally movable cable guide inside the wind turbine tower compensates torsion and length differences to cut wear, save space, and ease mounting.

Friction-channel wire clips secure solar panel wiring to maintain tension, prevent abrasion, and reduce electrical short risk.

A resin member covers the cooling pipe and bus bar to block condensation and conductive debris that could short adjacent power storage modules.

Interlocking protrusions secure multiple vehicle cables or ducts in minimal space, cutting assembly time and cost while allowing easy removal.

A movable clamping element lets conductors lock securely without slipping, yet detach, reattach, and pull through to the needed length.

A sliding ratchet mount secures multiple service lines without screws, saving space while allowing fast installation and easy maintenance.

An elastomer-core cable saddle uses a continuous retaining ring to fit varying diameters securely without sheath damage or extra gaskets.

Flexible side supports and a round base let this cable mount secure different bundle sizes without corner cracking under tie tension.

A push-in ratchet mount secures and stacks service lines in less transverse space while enabling tool-free adjustment and easier maintenance.

A hinged main unit and sliding insert keep service lines compactly mounted while allowing easier access for maintenance and diameter changes.

A serrated coupling hole with an inclined guide joins a perpendicular pipe to a flange without welding, cutting size, quality risk, and serration time.

Factory-built templates and framework reduce trench assembly, welding, and concrete use while keeping conduits supported and encased.

Openings in paired retainer clips let bus bars contact heat sinks directly, improving heat transfer while keeping components organized.

Visual preload markings and a threaded spring adjustment mechanism keep cable clamp force stable as elastomer blocks degrade over time.

A rotating clip mount relieves cable bundle twist and axial stress during vehicle assembly and vibration, protecting termination connections.

A rotating fixing-to-mount joint relieves cable and hose twisting during vehicle assembly while protecting termination connections from stress.

Interlocking restraint members stabilize a battery firefighting pipe, ensuring reliable medium discharge when pressure relief is triggered.

An elastic bend in a vehicle pipe mounting assembly absorbs hose vibration and limits structure-borne noise without adding bulky parts.

A permeable textile outer chamber and airtight inflatable inner tube prevent seam leaks while keeping the innerduct flexible for cable blowing.

Rigid and flexible tube sections with threaded couplers and 360-degree seals reduce waste buildup, odor, and hose deterioration in RV disposal.

Sensor-based hose movement monitoring detects damage early in robot cable guides, helping prevent cable failure and downtime.

Bolted, nestable redirector components replace welding to speed cable tray assembly, cut shipping volume, and maintain grounding.

Factory-built templates and mechanical framework reduce trench assembly, welding, and concrete use while supporting underground conduits.

Flexible coolant tubes and a T-shaped connector cut battery cooling assembly effort while maintaining liquid-tight sealing despite profile tolerances.

Spring-like wings and friction ribs let this wall-groove fastener secure cables or conduits by hand without tools, nails, or pipe damage.

A compressible collet and adjustable enclosure shield wireline cables from wellbore friction and impact, reducing wear and retrieval delays.

A detachable sleeve carries power through the elevator car wall, enabling one-person installation of displays and other electric devices.

An integrated spigot, coupling member, and locking member secure a brake line to a chassis bore by hand, cutting assembly time and tool use.

Groove-retained splice plates align and secure cable tray sections to prevent disconnection while simplifying installation.

Three radial bars and spacer bodies stiffen suspended line guides against inward forces, reducing deformation, wear, and bending radius.

An interlocking strap and offset anchor groove secure flexible tubing on skin while reducing dislodging and bend-induced occlusion.

A tapered slit protrusion with complementary poka-yoke features fixes vehicle lamp cable binders in one orientation to prevent loosening and cable damage.

A reversed-arm clamp secures cables or tubing with quick fastener mounting, reducing installation effort while preventing movement and tangling.

Integrated ball transfers guide heavy high-voltage cables through the cleat, cutting friction and eliminating separate rollers during installation.

A frame-mounted cable clip secures photovoltaic module wiring to prevent hanging wires, abrasion, and weather-related cable damage.

Interlocking upper and lower bridge parts protect high-pressure hoses from compression and bending while allowing vehicle crossings.

A segmented mounting plate routes hydraulic hoses beside electric components while limiting interference, heat exposure, and space waste.

Identical snap-fit clamp halves simplify installation and keep break detection wires accurately positioned on aircraft fuel pipes.

Identical snap-fit clamp halves simplify manufacturing and installation while keeping a break detection wire accurately positioned on a fuel pipe.

A releasable fastener lets VRF pipe supports slide and lock on suspenders without tools, speeding installation on uneven ceilings.

A curved sidewall and notched bundle connector route strapped elongated objects around bends while reducing adhesive failure in high-stress areas.

An integral roller and rotatable clamps let HV cables move through the cleat with less friction, reducing external installation equipment and time.

A rotatable connector with friction and elastic damping helps suspended ducts absorb earthquake vibration while limiting displacement and damage.

A slider, guide ramp, and positioning pin hold pull-out hoses at set positions without continuous pulling force or complex dual-wheel mechanisms.

A bendable support and positioning mechanism lets faucet outlets shift across a wider angle range without pulling or fixing the hose.

Synchronized rollers and electrical hoists automate gradual pipe string assembly, improving weld quality, safety, and vessel loading speed.

Bendable upper-edge tabs lock the pipe shield to hanger arms to stop vibration-driven slip while avoiding insulation and pipe damage.

Surface irregularities and a waisted set screw improve beam clamp grip on structural flanges, raising load rating while reducing slip and deformation.

A segmented multi-DOF hinge balances clamping forces around pipes, improving sealing while reducing hinge weight, size, and assembly cost.

A smooth strap and separate metal-tooth locking head enable tighter cable bundling without rack spacing limits while maintaining one-way locking.

Folded edge and nut tabs stop pipe hanger nuts from loosening under seismic or everyday vibration while allowing quick visual inspection.

Sensors and actuators shift pipeline natural frequency away from resonance to cut flow-induced vibration without reducing hydrocarbon output.

A hinged cable management arm keeps server cables anchored and untangled, enabling safer front-side maintenance without back-aisle access.

A tubular sleeve lets A&R wire pass through pipeline clamps without damaging pads, cutting mode-switch time and manual handling risk.

Rigid insulating standoffs and vented saddles support heavy jacketed pipes while limiting heat transfer to keep hot or cold fluids stable.

A segmented pipe coupling with pivotal mounts and fastener pads simplifies installation while improving sealing and resistance to pipe separation.

Curved channel edges and segmented cable holders keep bundled cables together and reduce snagging in tight conduits and corners.

Factory-prefabricated ceiling pipe feedthroughs combine fire, thermal, and sound insulation to speed multi-story pipeline retrofits.

A hollow fastener holder mediates hammer impact to prevent finger injury, control fastener placement, and speed installation.

A sliding collar and fork on a base plate stop hose interface rotation, keeping connections aligned and helping prevent leaks.

An elevated guidewire deploys leaching lines vertically on mine slopes, improving worker safety and recovering minerals from hard-to-reach areas.

A rotatable cable bracket keeps bend radius and optical-electrical separation intact while opening access for OIR module replacement.

A C-shaped flange attachment with a set screw bar secures suspended pipes and loads against sway and seismic forces.

A clamping block and shifting clamp connect multiple shafts and steel wires at once, speeding surgical robot assembly while transmitting torque and push-pull force.

A clamp-based table-side layout keeps surgical instruments and wires organized, sterile, and within reach without clutter or tangling.

Rotatable hubs, alignment pins, and funnel orifices let subsea multi-bore jumpers align without excessive torque, reducing size and installation effort.

Adjustable clamp rails and split clamp parts keep pipes concentric despite angular deviation, helping prevent contact and crevice corrosion.

Hand and foot tools latch onto a pressurized fire hose with beveled teeth, giving firefighters a compact way to climb out after floor collapse.

A suspended cable support lets elevated or underwater pipelines move with thermal expansion while cutting mounting points, heat transfer, and pipe stress.

Pre-integrated communication lines in a fenestration profile simplify installation while avoiding water migration, short circuits, and crowded onsite cabling.

A lever-adjusted bracket locks onto ceiling T-bar beams faster than screw fasteners while resisting side, rotational, and torsional loads.

Pre-formed keys and adjustable decking hangers speed overhead installation while resisting slippage, rotation, and concrete damage.

A flush hose guide uses rollers to cut hose wear and a complementary stopper to block dust and moisture from the reel compartment.

Semi-cylindrical clamp segments with pipe-contact projections maintain grip under vibration and seismic movement to prevent loosening.

Angularly distributed laminar clamping units balance axial loads through radial friction, reducing stress, wear, and uneven maintenance.

A blocking door with an integrated opening shutter simplifies chemical and nitrogen hose handling while limiting leakage and foreign matter entry.

Outward nub members hold insulation off the pipe surface, creating a vapor barrier that prevents condensation absorption and hidden corrosion.

A threaded inner and outer drop lets sprinkler heads be height-adjusted on T-bar ceilings, cutting installation time across varying ceiling heights.

A moving support and restoring force keep an extending fluid tube organized in storage, preventing tangling and twisting during retraction.

Reversible elastic legs and locking formations let corrugated tubes snap in and out easily while staying securely fixed to solid surfaces.

Annulus pressure drives a flexible metal sealing lip to strengthen the wellhead seal under high pressure and varying sealing conditions.

Concave TPV damping extrusions preserve air gaps under clamping, improving pipe clip retention while reducing sound transmission.

Flexible linked annular inserts let subsea pipeline field joints bend without coating cracks, preserving insulation and reducing curing delays.

A friction-fit riser ring prevents conduit fall-through while allowing easy adjustment and permanent embedding during floor finishing.

Collar-driven clamp attachment lets robots secure control lines to pipe without screws or welding, cutting red-zone handling and install time.

Manually manipulatable coupling segments and a pre-positioned gasket simplify pipe joining while maintaining a secure fluid-tight seal.

A freely rotating and swinging pulley support lets a dental instrument hose follow pull direction smoothly while keeping the rod stable.

Positive-locking retention geometries secure the rubber profile without overloading its lips, reducing damage during hose or tube clamping.

A pivoting clamp and resilient arm secure tie straps to threaded studs while allowing quick removal and reuse without damage.

Tapered grooves and a self-locking ratchet secure flanged tubes with a fluid-tight sanitary seal while allowing quick clamp opening and closing.

Flexible secondary line sections attach to a primary fuselage-mounted line, cutting interface points, installation effort, vibration, and noise.