Polyamide Coatings TRIZ Cases
- Low-Phosphorus Polyamide Compound for Flame Retardancy and Low Migration
A low-phosphorus aryl phosphate and phosphonate system helps polyamide compounds reach V-0 flame retardancy with low migration and strong adhesion.
- Self-Mineralizing Coating for CO2 Capture and Passive Cooling
Amine-coated alkaline mineral particles capture CO2 as carbonates while reflecting solar radiation to cool roofs and façades.
- Copolyamide Composition for Tunable Tg and Melt Processability
Adjusting X, Y, and Z recurring units avoids isomorphic polyamides, enabling tunable Tg and melt processability without excessive melting temperature.
- Silicone Rubber Membrane Coating for Tire Curing Wear Resistance
A silicone rubber coating with hydrosilylation crosslinking improves curing membrane adhesion, flexibility, and wear resistance in tire production.
- Aqueous Emulsion Pavement Primer Reducing VOC Emissions
Replacing volatile solvents with water in asphalt emulsions eliminates VOC emissions while maintaining adhesion and moisture resistance.
- Polyimide-Inorganic Composite Material for Transparent Displays
A polyimide-inorganic composite material combines a specific diamine-anhydride ratio with inorganic particles to enhance thermal stability.
- OLED Encapsulation via Self-Assembled Hydrophobic Layer
Self-assembled organic layers on polymer substrates block moisture ingress while maintaining light transmittance.
- Polyimide Film Coating Adhesion via Polyamic Acid Promoter
A polyamic acid layer resolves solvent-induced delamination between polyimide films and hard coat layers.
- Thermosetting Resin Composition for Touch Panel ITO Etching Resistance
A thermosetting resin composition forms a cured film with high transparency and adhesion to glass and ITO substrates.
- Non-yellowing degassing agents for powder coatings
Aromatic ketals and carbamates release volatiles from curable coatings, eliminating the yellowing caused by traditional benzoin agents.
- Structured Clearcoat Composition Without Fumed Silica
Polyamide and polycarboxamide components replace fumed silica in coating compositions, eliminating settling issues while maintaining ring line stability.
- Epoxy Resin Coating Composition Using Branched Thiol Curing Agent
Two-component epoxy resin coating uses branched thiol curing agent for low temperature curability.
- Caprolactam-Capped Polyisocyanate Activator for Crosslinked Polyamide Polymerization
A caprolactam-capped polyisocyanate activator initiates anionic lactam polymerization to form high-molecular-weight chains.
- Thermosetting Resin Composition for Glass Adhesion and Hardness
A thermosetting resin composition with a fluorene skeleton epoxy compound forms cured films.
- Film-Forming Composition Using Triazine Hyperbranched Polymer
A film-forming composition combines triazine ring-containing hyperbranched polymers with aromatic polyamide-based hyperbranched polymers to enhance film hardness.
- Cross-linked aramid polymer thermal processing
Thermal treatment cross-links non-crosslinked aramid polymers to boost mechanical strength and electrical insulation.