Portable Frames TRIZ Cases

See how a non-solid material with dual-sided imagery provides realistic opponent visualization

See how a threaded rod and extruded receiving component enable height adjustment and stable sup

See how a leg lock assembly with tank blocker prevents fuel tank obstruction during portable gr

See how nested, extendible frame members with locking mechanisms replace bespoke cages, reducin

See how a hinged display support with translucent shield protects sideline video monitors from

See how a multi-dimensional wheel bracket mounts wheels close to the cabinet for compactness wh

See how a pivoting handle with cam-arm and spring-loaded locking resolves the contradiction bet

See how a leg lock assembly with fuel tank detection prevents configuration transition until th

See how a motor-driven piston with load sensors replaces manual screw adjustment to stabilize h

See how nesting a gas cooler between floor and compressor skid reduces installation area and ce

See how a columnar organizer with angled tiers and removable bins transitions storage from hori

See how dynamic fan speed adjustment using ambient-exhaust temperature difference maintains deh

See how a vertical column with angled receivers moves project storage from desktop to wall, red

This case uses flexible boPET films to suspend cooling air movers, limiting vibration transfer while conserving chassis space.

See how nested evaporator-condenser coils and temperature-feedback fan control improve dehumidi

See how a freestanding organizer with angled removable bins and retractable wheels transitions

Repositionable clamps and pin brackets let one generator assembly mount securely on different container frames without interference.

Translating frame structures let LED modules tilt into place without hitting adjacent panels, while magnets and latches resist wind-driven dislodging.

An internal locking dog and axial plug let a hold open rod carry heavy loads without exterior rod grooves or long-term lock wear.

By placing the gas cooler between the floor member and compressor skid, this module cuts footprint and weight while keeping a low center of gravity.

A lifting and support frame lets a mobile axial fan stay compact in transport while directing airflow for smoke or gas ventilation.

Integral attachment and alignment features secure the active grille actuator without separate fasteners, cutting assembly time and airflow drag.

Modular arms and telescoping extensions create overhead shelving that adapts to different item widths and heights without complex custom builds.

Adhesive or welded flat support sections secure solar modules on flat roofs without drilling, preserving leak tightness and limiting roof load.

A ribbed plastic support block uses internal supports and retainer rings to hold propane tanks securely without the weight and fragility of concrete.

A separable one-piece mounting aid combines hose holding, anti-tip, and attachment functions to cut part count and simplify appliance installation.

A compact three-drive layout with universal joints enables large patient support angles while avoiding collisions and limiting tipping moments.

A rod-shaped elastomer spring with metal reinforcement absorbs high flexural vibration loads without the deformation and complexity of coil springs.

Spring compression and a sliding connector block isolate fore-aft seat vibration, reducing driver fatigue without raising seat height.

Vertical removable bins on a wheeled stand free desk space while keeping papers and supplies easy to access and transport.

A multipoint seat mount combines elastomer and fluid elements to absorb rotational and translational cab motion, improving driver comfort.

A clamped or latched housing mount replaces screws to speed compressor assembly, ease disassembly, and resist vibration.

A skeletal appliance base uses U-shaped rails and a central index ring to stack compactly, cut weight, and maintain appliance support.

Twist-adjusted threaded housings give RTA furniture a wide leveling range, hidden threads, heavy-load support, and no-tool installation.

Oblique foot and covered ribs reduce carpet pile interference, making image forming apparatus stabilizers easier to mount and more stable.

Rubber-filled inner and outer tubes create a thermal break for flat-roof solar anchors, preventing cold bridges without added ballast.

A pinned lug bracket mounts rear ballast on a tractor hitch frame without blocking drawbar or PTO use, improving loader stability.

A lightweight composite pad with ballast recesses and integrated cage mounts speeds AC condenser installation while improving theft resistance.

A resilient insert between the stem and threaded head lets an access floor pedestal stay height-adjustable while reducing noise and vibration.

A modular rooftop equipment curb uses telescoping frames and spring mounts to fit varied footprints while isolating vibration, noise, and seismic loads.

Adjustable rods and angled supports tilt an air handling unit for proper condensate drainage, helping prevent mold and mildew buildup.

A nesting stacking component lets steam oven units interlock without sliding, making capacity expansion stable, modular, and space efficient.

A tensioned foot support simplifies front-foot positioning across appliance variants while creating a firm, play-free base connection.

A hollow post with interchangeable cabinet mounts cuts site preparation, protects cables, and supports varied bolt patterns in outdoor telecom installs.

Real-time accelerometer feedback and MR damping help isolate payloads from changing acceleration forces across a wide vibration range.

Twistable bracket sections lock porous pavement units quickly, cutting setup and removal time while supporting heavy loads on weak soil.

A locking swivel and telescoping hanger let suspended HVAC units rotate and adjust height for better airflow, faster installation, and easier service.

A pivoting locking part secures washing machine friction dampers without tools, simplifying assembly and release while maintaining stable attachment.

A motorized wheelchair turntable uses secure anchoring and power transfer to enable safe short-axis rotation in tight spaces and vehicles.

Vertical removable bins with angled fronts improve access to in-process projects while saving desk space and enabling easy transport.

A wall-mounted rack holds a bicycle by the seat and stores a helmet in one compact unit, avoiding awkward lifting and saving urban floor space.

A threaded dowel and tapered members let a gib shim set gap precisely without iterative machining, cutting adjustment time and labor.

Curved locking members, ramps, and a spring-biased link secure stand bars and the sliding tube to prevent handle drift and vibration.

Sloped and impact surfaces on a stacking bracket hold upper HVAC units against sliding and dislodgement while eliminating wood crating waste.

A telescoping equipment curb adapts to varying rooftop footprints while adding vibration isolation, noise damping, and seismic resistance.

An oriented elastomeric membrane with slits or channels creates directional support, reducing hammocking, creep, weight, and material use.

A sliding bracket lets stacked appliances transfer upper-unit weight securely while opening access to lower-unit service areas.

A hard anchor and soft pad combine with deformable ribs to ease leg insertion while maintaining long-term pull-out resistance.

Sloped stacking inserts replace wood crating to keep stacked HVAC units aligned, protected, and easier to strap during transport.

A universal canopy bracket supports adjustable fan, light, and heater mounting while using soft blades to improve airflow safety and portability.

Interconnected support frames and a grated base drain water to prevent ice buildup while keeping heat pumps stable and easy to handle.

An elevated washer or dryer mount adds a front access opening and under-unit storage while improving loading height and user access.

Rail springs clamp to the HDD and flex on the bracket to absorb fan-induced vibration, improving throughput without bracket redesign.

A spring-biased sleeve lets appliance feet self-level under changing loads while damping vibration and noise without rear-foot adjustment.

Controlled slippage in diagonally slotted plate joints dissipates seismic energy while preserving clamping force and limiting structural damage.

A shaped support ring converts simple back-and-forth pulling into wok rocking, reducing lifting effort, burn exposure, and training needs.

Directional isolating assemblies let a raised speaker absorb vibration and air movement while staying stable and aiming sound effectively.

Tilt-adjustable support arms and clamping knobs let auto body parts be securely reoriented with less handling, marring, and repair delay.

An integrated connection member keeps the compressor support spring seated under vibration, simplifying assembly while improving damping.

Spring-biased clips and a channel plate secure wireless test units in vehicles while enabling fast tool-free transfer and vibration protection.

Grooved grommet holes cut bolt abrasion during assembly, preserving valve vibration isolation and durability without extra sleeve parts.

A linear motor and pneumatic shock absorber actively counter high-frequency seat vibrations that hydraulic damping cannot effectively attenuate.

A guide rail, guide unit, and coil spring simplify display stand height adjustment while improving shock resistance, stability, and quiet operation.

Radial protrusions and flexible isolation members secure the compressor during transport and cut mounting assembly time.

A concrete or cast mineral stirrer stand absorbs fluctuating loads and reaction forces to stabilize submersible motor stirrers.

A pivoting latch with resilient hooks secures a data storage drive quickly, avoids dropped screws, and tolerates misalignment and vibration.

A sliding latch and elastic assembly secure fans in existing panel holes, simplifying replacement while reducing damage risk and placement limits.

A spring and pulley cable layout counterbalances eccentric rotating loads without heavy counterweights, added inertia, or blocked shaft rotation.

A deflecting drive gear disengages at excess torque to protect appliance pedestal adjusters, especially plastic rear supports, from damage.

An elevated-rim potty seat holder conceals used seats, prevents leakage, and supports hygienic wall or pedestal storage.

A lightweight fillable pad is shipped empty, then filled onsite to elevate equipment units with concrete-like stability and lower installation cost.

A rack gear, one-way bearing, and damping gear prevent medium cassette free-fall shocks during installation while allowing easy removal.

Integrated leg and fixing brackets let the cabinet and subcabinet be repeatedly joined or separated without extra connection hardware.

A pivoting cradle, side clamps, and spring return hold motorcycles upright across different tire widths without manual chock repositioning.

A pivoting support and locking pin keep a hitch-mounted grill level, height-adjustable, and securely stopped for safer tailgate use.

A pivoting non-slip stud improves carpet grip while folding into the sleeve to prevent floor scratching and simplify stand setup.

A fixed base and adjustable metal platform keep rooftop condensers level, stable, and weather resistant across varying roof slopes.

Isolators between the test slot housing and mounting plate block vibration cross-talk, improving disk drive test accuracy and lowering cost.

Integrated coupling ribs secure a washer-dryer to its pedestal without separate parts, reducing surface damage, cost, and mounting effort.

Twist-lock brackets secure porous pavement units under load while allowing much faster installation and removal than stakes or planks.

An adjustable connecting unit keeps flexible band tension between shaft wheels, preserving monitor angle during height changes.

A hollow-riser equipment pad stabilizes elevated condensing units while cutting separate parts, installation labor, and shipping bulk.

A two-part hinged grill foot adjusts incline for soft or fatty foods while keeping the cooking surface stable and improving fat drainage.

A hinged rear mount and front bracket let rack equipment be inserted and removed from the front, avoiding side access and slide rails.

A hinged cover and cord-holding body combine device support and headset storage to prevent tangling and reduce carrying burden.

Adjustable crosspieces, a removable fuel tank, and check valve bracing let one pump skid fit varied engine-pump sizes and convert to a trailer.

A suspended guiding frame self-centers aerial lines into opposing blades, enabling safer remote cutting across rugged or inaccessible terrain.

A mobile charger uses peripheral sensing and self-positioning to hide near the vehicle during charging, reducing theft risk and worker waiting time.

Removable wheeled brackets support an industrial vehicle on its side, enabling stable horizontal transport, rolling movement, and easier handling.

By merging turbine, generator, and control equipment across fewer trailers, this case cuts transport interconnects and speeds installation.

Integrated ladder, fall arrest, and enclosure ventilation make mobile generator units safer to access and reliable in remote power use.

Hydraulic pistons and docking plates align four separate power trailers quickly, cutting setup time and misalignment at constrained work sites.

Detachable support arms let one generator frame switch between transport packaging and a stable support seat while reducing waste and stack height.

Segmented interlocking pads spread outrigger loads over a wider area to improve stability, reduce pressure concentration, and protect ground surfaces.