Thin Material Handling TRIZ Cases

See how a rigid V-shaped laminate with adhesive and elastomer layers prevents rug corner curlin

See how a rigid V-shaped body with adhesive and hook-and-pile fasteners keeps rug corners flat,

See how a V-shaped rigid body with adhesive and elastomeric layers prevents rug corner curling

See how a V-shaped rigid body with adhesive and elastomeric layers maintains rug corners flat,

See how segmented profile bars with high-friction surfaces and intentional gaps prevent slippin

See how an automated diverter valve uses sensors and servo control to switch vacuum airflow bet

See how a V-shaped rigid body with adhesive and elastomeric layers prevents rug corner curling

See how a rigid V-shaped body with adhesive and elastomeric layers maintains rug corners flat,

A diverter plate with an orifice and bumper disperses cooking media to scour fryer walls, remove debris, and extend oil life.

Parallel slits and a folded pocket let a serviette align and secure cutlery while preserving surface coverage for hygiene and cleaning.

High and low pile zones with ultra-fine fibers trap fine dust, limit re-entry, and improve vacuum-driven particle removal.

Light-colored backing and filler-loaded coatings raise carpet tile reflectance while reducing visible edge contrast and preserving stain resistance.

Movable friction locking immobilizes the clamp at the adjusted wall thickness, preventing pin pivoting and grip deviation under load.

A segmented ramp with a clock-spring assist and sliding link deploys wheelchair access through modified vehicle doors without major structural changes.

A two-plate ramp with a slide mechanism and clock spring enables smooth wheelchair access while fitting OEM vehicle door openings with fewer modifications.

Nanometer-scale protrusions on stainless steel separator surfaces enlarge GDL contact area and cut contact resistance to 10 mΩ·cm2 or less.

A vertical tether cuts source-wafer footprint and simplifies release, enabling denser micro-transfer printing with closer target placement.

Radial valve engagement and a locking seal let a Presta pump chuck attach one-handed with minimal force while reducing leaks, wear, and valve damage.

A hardness-to-modulus index helps rolled metal withstand repeated bending while enabling smaller bend radii in foldable parts.

A nested barrier, housing, and lock assembly blocks tool access to valve adjustment heads while resisting precipitation and unauthorized tampering.

Iron particles in a brass-coated steel cord preserve rubber adhesion in heat and humidity while removing cobalt from tire reinforcement.

A one-piece divider block with replaceable sleeves and pistons handles high lubricant pressure while cutting wear, waste, and full-block replacement.

Iron particles in a brass-coated steel cord suppress zinc diffusion, helping tire rubber retain adhesion in hot, humid conditions without cobalt.

A layered titanium composite uses alloyed surface skins and a porous pure-titanium core to cut alloy cost while preserving corrosion resistance.

Continuous vertical casting plus tandem wiredrawing and annealing cuts drawing passes, oxidation, energy use, and material loss in copper tube production.

Lower Nb nickel cladding enables roll bonding at 880°C or below, improving base metal toughness while preserving bond strength.

Lower Nb in the plating layer preserves metallurgical bonding during cooler final rolling, improving toughness in thicker roll-bonded sheets.

A metal outer layer bonded to compressible neoprene foam absorbs impacts, cuts protection mass, and makes damage easier to detect.

Rollers held by a spring or wing lock valve back-rotation when power is off, then release before torque transfer to cut friction and motor load.

Alloying only the titanium surface layers and using a porous pure-titanium core cuts cost while preserving corrosion and oxidation resistance.

A layered titanium alloy skin over porous pure titanium cuts alloy cost while preserving corrosion resistance and hot-workable formability.

A molten glass coating cuts heat loss, surface cracking, and die friction during hot working of crack-sensitive alloys.

Oil-in-water transfer plate lubricants cut surfactant waste while reducing friction, spillage, and jamming in high-speed container handling.

Transition metal oxide glass compositions deliver stable color, deep ion-exchange compressive layers, and high damage resistance without post-forming heat treatment.

Controlled roughness and flattened surface peaks cut friction and die galling in galvanized steel sheets while preserving painted appearance.

A tailored bimodal to multimodal brittle powder mix enables thick cold-sprayed ceramic and composite layers without 20-50 wt.% binders.

An oil-in-water lubricant layer cuts transfer plate friction for open containers, reducing spillage, jams, and lubricant use.

Fine carbide or boride particles under 5 μm create a harder, unfragmented wear zone that resists cracking and extends crushing part life.

Metal-doped aluminosilicate glass uses colorfast ion exchange to preserve preselected hues while building surface compressive stress.

Lowering crystallization to 600-1,000°C with a Ba-Si-O glass composition helps cut dielectric loss in high-frequency substrates.