Windows TRIZ Cases

A flexible photovoltaic solar shade covers vehicle windows to generate electrical current from sunlight.

Segmented inner glass plates redirect mounting forces away from thin sections, reducing weight while maintaining structural rigidity.

A structured conductive periodic grating on rail vehicle windows enables frequency-selective electromagnetic wave transmission through segmented annular coatings.

Rotating roof members deploy closing bodies to seal vertical post contact zones, resolving the trade-off between waterproof reliability and visual aesthetics.

A vehicle door liquid diverter assembly uses a funnel and conduit to redirect water away from electrically powered components.

Mold pins engage insert indentations to eliminate complex movable blocks and reduce glass stress.

A vehicle power window drive motor uses a position detection sensor and controller to correct downward movement of the opening member.

A laminated glass pane incorporates a rectangular metal strip along its peripheral edge to withstand oblique ballistic impacts.

A sunshade close-out member conceals structural elements behind the trim opening, resolving aesthetic conflicts with support strength.

Liquid sealant replaces misaligned foam gaskets in telephone handsets, ensuring precise sealing while eliminating material waste.

A golf car windshield features a foldable lower panel that opens for airflow while the upper section remains fixed.

Telescopic bars driven by a single motor reduce flapping and noise while improving operational reliability.

A vehicle partition uses an intermediary bracket system to attach securely using existing structural holes without drilling new openings.

A laminated infrared reflective plate uses four cholesteric liquid crystal layers to reflect heat radiation while maintaining visible light transmittance.

Elastic contact portion bends to allow narrow flange entry, maintaining pressure contact and reducing guide rail weight.

A windshield mask layer design with a heat-resistant adhesive buffer.

Positioning holes on a vehicle glass guide piece accept injection molding pins to prevent plastic-induced deformation and improve yield.

A laminated plate design featuring a peripheral region with flat and undulating areas to manage structural bonding.

A deployable pillar molding resolves the trade-off between moisture control and wind noise by dynamically adjusting its profile via actuators.

Arcuate lower portions maintain flush deck contact, eliminating twisting gaps that plague single-piece mounts.

Carbon nanotube heating films melt ice and snow on windshields and ground areas while reducing system complexity and energy consumption.

Mechanical clip-in assembly replaces urethane adhesive bonding, eliminating cure time and reducing capital investment.

A vehicle window lifter carrier guide surface features cutouts to discharge particles from the flexible traction means path.

Automotive glazing integrates a LiDAR sensor into the windshield structure using specialized infrared transmission glass.

A head-up display converts linear light to elliptical polarization using a polymer film element.

A glass plate with controlled surface roughness parameters creates a smooth antiglare transition.

Disposable adhesive films remove ice from vehicle headlights, avoiding complex heating systems and preserving lens aesthetics during winter operation.

Cutting the incident lens corner places light sources near the optical axis, reducing retroreflector distance and lowering manufacturing costs.

Dynamic shape adjustment of the display surface mitigates driver glare while preserving information visibility through localized segment movement.

Coating-free dividing lines isolate capacitive switching regions from low-E layers, enabling contactless control while preventing surface fouling.

Segmented foaming hides the lower edge for a clean finish while an internal PU profile absorbs tension for compact storage.

Integrated guide sleeve brackets position the movable body to reduce assembly time and improve reliability.

A vehicle window pane integrates a planar antenna structure between glass layers to enable efficient GNSS signal transmission.

Embedded neodymium magnets replace cumbersome mechanical fasteners, eliminating ladder use and reducing installation time.

Laminated vehicle glazing integrates a masked flexible AMOLED screen and electromagnetic shielding within the interlayer.

Print obscurations on plastic films laminated between thermoplastic sheets to improve optical quality.

A sliding window assembly uses a conductive rail to maintain electrical continuity between heating grids.

A glass-resin composite window uses a low-crystallinity inner sheet to enhance impact resistance and bending workability.

A laminated glass design features an intermediate adhesive film with a continuous transmission region and a peripheral light shielding area.

A glass support member uses a swaying column tip to align with vehicle body flange holes without precise positioning.

An eccentric roller shaft drives two parallel blind webs, enabling simultaneous adjustment of front and rear roof sections while adapting to complex curvature.

Heating a single glass panel enables bending and laser cutting before cooling, eliminating gaps between adjacent sections for flush assembly.

Merging detection functions into a single electrode system eliminates pulse generators, reducing component count and device size.

Segmented latch openings allow infinite position adjustment while a spacer prevents rotation to eliminate track jamming.

A vehicle glazing bending method combines edge and surface shaping using pre-bending and end bending rings to form complex glass geometries.

Modular roller blind arrangement with a bearing shell attached from below the roof structure.

Segmented bridging members engage flexible protrusions to restrict distance reduction while allowing spreading for shock absorption.

A movable side deflector assembly adjusts its position to reduce aerodynamic drag on tractor-trailer vehicles.

A segmented sun roof design collapses rigid panels vertically to preserve trunk volume.

A gel composition with alumina particles and alkyl sulphates prepares glass or ceramic enamel frit surfaces for adhesive bonding.