Membrane Filters TRIZ Cases

See how a plate filter with 0.6-1mm mesh pitch reduces brewing pressure and temperature while b

See how an external annular chamber with through holes distributes hot water slowly and uniform

See how polyphenylene sulfide non-woven filters remove 0.5-micron particulate at 425°F, reduce

See how a non-woven PPS filter maintains interstitial openings at 425°F to filter 0.5-micron pa

See how merging the filter cup and filter piece into one removable assembly eliminates separate

See how a fixed tube body with ejection ports washes extraction filters uniformly as the lid re

See how metallocene-catalyzed polyolefin fibers with differential melting points enable thermal

See how a polyphenylene sulfide filter removes 0.5-micron particulate at 425°F while reducing o

See how a PPS non-woven filter removes 0.5-micron particulate at 425°F, extending filter life t

See how metallocene-catalyzed polyolefin bonding in non-woven structures enables 100% carpet re

See how a segmented pod design combines a reusable ring body with a disposable biodegradable fi

See how a spiral flow guide channel between inner and outer housings prevents water mixing, ena

See how merging the oil separator and distributor into a single welded steel assembly eliminate

See how metallocene-catalyzed low-melt polyolefin enables thermal fiber bonding without contami

See how a plunger-driven filter with photochemically etched holes extracts plant milk without a

See how a vacuum switch manifold monitors pressure thresholds to trigger filter purge and repla

See how a co-molded synthetic monofilament fabric on a perforated plastic support modulates tur

See how a rotating core drives thimbles to open and close water passages, preventing internal l

See how a vertical columnar inlet repositioned along the rear wall distributes liquid uniformly

See how a filter device positioned between dispenser and container prevents coffee grounds esca

See how nanofiltration membranes continuously remove degradation products from frying oil to ex

See how an inclined oil tank and automated circulation filtration system remove sediments natur

See how a dual-purpose capacitive sensor replaces mechanical floats and contact pads to detect

See how a drinking utensil with side-opening mesh filter enables portable coffee consumption by

See how metallocene-catalyzed polyolefin bonding eliminates multi-polymer contamination in non-

See how a removable filter with square-shaped holes and detachable cap improves coffee fines se

See how photochemically etched filter holes and a plunger with clearing blades extract plant-ba

See how a disposable adhesive mat with antibacterial layers captures dirt and pathogens from fe

See how integrating the water filter device and storage tank into a single refrigerator assembl

See how metallocene-catalyzed polyolefin fibers with differential melting points enable thermal

See how divalent metal-containing mercaptobenzimidazolate salts enhance electret charging effic

A removable nested sediment trap filters condensate before pump-out, blocking debris while reducing cleaning downtime in air handling systems.

Flexible spring contacts ground the filter bowl through the filter, dissipating static charge in triboelectric fluid service without wear-prone direct paths.

Ultrasonic vibration inside the slurry filter prevents binder clogging, extends filter life, and supports thinner, durable battery separators.

A removable cooling circuit filter uses a converging bottom wall to guide flow, cut pressure loss, and simplify maintenance.

A removable filter insert with a conical end guides coolant flow, cuts pressure loss, and simplifies maintenance in cooling circuits.

Using two spools with different weights and spring forces, this case widens differential pressure range while improving low-pressure detection stability.

A monolithic manifold integrates upstream and downstream lubricant filters around the pump to cut sealing interfaces, weight, and drivetrain cost.

Die-cast aluminum replaces plastic to improve oil-filter strength, heat resistance, and integrated cooling with an under-mounted radiator.

A circumferential seal fixed to the filter element improves drainage opening sealing while making seal replacement and installation more tolerant.

A bayonet-coupled filter uses groove-covering radial seals and axial elastic compression to maintain secure sealing across pressure and temperature changes.

A longer pilot aligns the filter before thread engagement, reducing cross-threading and improving mounting stability in powerplant fluid systems.

Staged radial and axial sealing in a bayonet filter coupling lowers assembly effort while improving leak resistance across temperature changes.

Spacer-guided centering and a viscosity-responsive bypass help this three-stage oil filter cut pressure drop and ease replacement.

A manifold flange limits connector pipe tilt so O-ring compression stays within range, preventing leaks in removable filter cartridges.

Bulbous tube ends absorb tank and filter misalignment, enabling sealed in-tank hydraulic filter connections despite large rotomolding tolerances.

A ball-type snap-in connection replaces blocked screws on filter plates, keeping attachment parts secure, fluid-tight, and easy to remove.

A concentric outlet tube seals the clean side from threaded-surface impurities while guiding spin-on filter installation.

Conductive valve parts let the controller detect bypass closure electrically, simplifying oil filter structure without extra sensing parts.

A sealed outlet tube inside the threaded bore isolates dirty threads from the clean side, preventing installation debris from contaminating filtered fluid.

A free space inside the sealing ring lets the anti-twist device, switch, and bypass valve work reliably for clog indication and emergency flow.

A pivoting retaining part lets a hydraulic filter cartridge rotate freely while keeping a compact sealed interface and stable fluid flow.

A flange-limited connector pipe controls cartridge tilt to keep O-ring compression stable and prevent leakage under side forces.

A concentric outlet tube with an external sealing portion separates the threaded interface from the clean side to block installation debris.

A sealing-ring end plate creates space for a switch lock and bypass valve to indicate filter contamination and maintain hydraulic oil flow.

An intermediary adaptor mounts a canister filter to a simple threaded hydraulic manifold while preserving sealing, flow routing, and monitoring access.

Tapered screen apertures cut viscosity-dependent pressure loss and particle jamming while maintaining high-pressure hydraulic fluid purity.

A rotary direction-changing assembly detects obstacles mechanically and reverses a pool cleaner without complex electronics or cable-entangling swivels.

A ball-type snap connection secures filter press attachments under high pressure while avoiding thread blockage and loose fasteners.

A flexible-to-hardened fastening region locks the insertion adapter in place, enabling stable filter mounting and immediate removal without leakage.

A replaceable female coupling and locking member keep vehicle filter changes leak-tight while protecting seals and pipe connectors from wear.

Sensors in compressible decontamination media track fluid condition and trigger remote alerts to extend equipment life and limit contamination.

Interchangeable end sections nest inside the mantle to cut transport volume while simplifying tank assembly, cleaning, and part replacement.

A threaded adaptor plug with internal fluid channels enables leak-tight spin-on filter mounting across different hydraulic flange cavities.

A motorized puncturing and sealed catch compartment drains hot oil filters faster while reducing burns, spills, and cleanup waste.

A two-sided housing clamps a polyester coarse filter without overmoulding, cutting assembly cost while managing cold-start pressure drop.

A vent tube equalizes pressure in the filter element, speeding drainage and reducing spillage when the drain plug is removed.

A sliding piston and torsion lock detent keep a threaded filter cartridge from backing off under vibration while allowing low-torque removal.

An adjustable spindle-driven backwash element compensates for filter tolerances to improve cleaning efficiency and maintenance reliability.

Polygonal cartridge-to-container coupling stops relative movement in hydraulic filters, cutting flow resistance, power waste, and seal damage.

A replaceable female coupling and locking ring keep vehicle liquid filter changes leak-tight while reducing connector damage and seal wear.

A nested drain plug in the hydrostatic transmission filter enables quick fluid changes with controlled flow and less oil spillage.

Guide-slot mounting and dual gaskets let a larger pipe fitting filter be removed easily for cleaning while maintaining sealing.

A concentric outlet tube seals against the inlet spud to isolate filter threads and keep installation debris out of the clean side.

Polygonal cartridge-to-container coupling prevents rotation, unfiltered oil leakage, and seal wear while keeping hydraulic filter assembly simple.

A tilted compliant seal and anti-rotation interface keeps filter cartridges aligned, prevents bypass leakage, and blocks non-matching inserts.

A one-piece molded housing and support tube cuts welding and parts count while preserving sealing and easy filter replacement.

An endcap notch and housing tab guide correct filter installation while containing excess adhesive and protecting the filter media.

Asymmetric protrusions, recesses, and a guide rib block wrong filter insertion, reducing leakage and preserving purification performance.

Separate engine and cabin airflow paths in one housing preserve filtration performance while fitting tight engine-space limits.

A perforator, gripper, and containment cavity drain vehicle filters before removal to reduce spills, manual strain, and safety risks.

A potted toroidal gasket and recessed end cap structure improve filter sealing during replacement while preventing adhesive leakage into filtered fluid.

An integrated valve cage, spring-loaded body, and screen enable tool-free filter replacement while maintaining sealing, pressure response, and lower manufacturing cost.

A deformable retainer ring aligns bayonet position indicators despite tolerance stack-ups.