Pipe Supports TRIZ Cases

Movable tube clamps on a ring-shaped organ holder stabilize connected perfusion tubes and reduce strain that can damage the organ.

Elongate slots and recessed fastener seats let this pipe clamp open wide without disassembly while improving load rating and acoustic dampening.

An openwork cubical support lifts a foot valve off the water bed, protecting it from damage while keeping water flow unobstructed.

A ground-anchored modular hose hanger uses interlocking parts and a removable face plate to prevent rotation, simplify repair, and cut shipping space.

An elastic spring coupling lets a spiral hose box tilt during pull-out, easing access while avoiding wall damage from rigid mounting.

A pivoting lever-arm support shifts pipe contact points to limit corrosion and enable inspection or repair without temporary supports.

An attached isolation pad with a stiff reinforcing profile keeps riser clamps aligned, limits vibration transfer, and resists flange deformation.

A split fuel line clamp uses one rigid mount and one movable bent-clip clamp to absorb assembly strain and improve fatigue life under engine vibration.

A flap passing through the pin opening forms a simple jointed clamp closure that saves material while keeping the locking pin securely retained.

A one-piece clip locks a strut channel to a support rod to reduce buckling risk, simplify installation, and raise compression load capacity.

Angled staple spikes and a deformable crown create pre-tension, resist withdrawal, and keep timber joints secure through shrinkage and repetitive loads.

A T-shaped hanger passes through angle-iron gaps, then rotates to lock in place for secure suspension without excessive flange torque.

An adapter inserted into multiple pipe fittings fixes parallel pipe spacing while preventing structure contact, leakage, noise, and insulation blockage.

Keys and adjustable hangers speed installation of lights, HVAC, and pipes while avoiding drilling damage to decking and concrete.

A sealed conduit, locking member, and outer-pipe clamp route the inner pipe through walls while reducing leakage risk and wall damage.

A funnel-guided support member lets aircraft fuel pipes pass through rib apertures without manholes, cutting wing weight and installation effort.

Guide-aligned joining blocks and a single tightening bolt shrink fluid control assembly while easing maintenance and reducing assembly time.

An invertible frame and jack screw keep pipe support low and stable across diameters, reducing the need for multiple welding stands.

A ratchet clamp uses asymmetrical teeth, interchangeable pawls, and a tamper-evident cover to create sterile fluid-tight joints.

Elastic blades press an auxiliary tube against hollow-arm cavity walls to suppress resonance fatigue and improve turbomachine tube reliability.

A snap-fit clamp and retainer support tubes through panel holes without extra drilling, cutting installation time and protecting edge sealants.

Wedge-shaped clamp elements and a compressive strap secure flexible pipes while improving handling, fit across diameters, and buoyancy jacket attachment.

A continuous fluid pipe mounted outside wing ribs avoids rib apertures and multi-section joints, simplifying aircraft wing assembly and maintenance.

Integrated intumescent layers and peelable seal halves fit varied pipe diameters, then expand in fire to block gas or fluid passage.

A single ground spike secures micro tubes, hoses, connectors, and outlets to simplify irrigation setup and cut installation time.

Constraining the coil-to-hose connector to vertical travel cuts bending, twisting, and vibration stress in high-pressure waterjet fluid lines.

A pivoting two-part bend restrictor protects flexible pipes during installation, then removes easily to avoid heat buildup and tie-in loads.

Curved flexible support members cut pipe insertion force while increasing retention, helping clamps hold rigid and flexible pipes without damage.

Pivotable tabs formed in the shield body prevent sliding and rotation on varied hangers without extra parts, while rounded edges improve installation safety.

A nested securing mechanism locks into the reinforcement layer to keep flexible pipe fittings sealed under high pressure and temperature.

A sleeve-and-plug anchor uses expanding legs and dynamic outward force to hold high loads in cracked concrete with 3/4-inch embedment or less.

A central hose reel inside the boom arm feeds the hose along the center plane, cutting lateral forces that can deflect milling direction.

Rigid polyurethane sandwiched between tensile reinforcement layers helps subsea clamps resist creep deformation under high stress and temperature.

A calibrated frangible hanger breaks under earthquake-driven conduit loads, protecting concrete decks from irreversible anchor damage.

A dual-mechanism cable support adds a third retained position, improving rack maintenance access while avoiding interference with article paths.

A shell with interlocking grab tabs adds a sealed annulus around pipe fittings to improve fluid isolation and multi-wall containment.

Perforated flanges lock a pipe support shell to hangers, reducing plastic pipe sagging while allowing flexible overhead installation.

Resilient damping fingers contact the vane interior to suppress conduit resonance, cutting stress and extending gas turbine life.

A pivoting cam protrusion clamps the sprinkler to the support frame, cutting assembly steps while keeping fixation secure.

An inner-outer ring structure shields an elastomer seal from aggressive gases while leaving room for thermal expansion at high temperatures.

Torque-set friction between slide bearing plates restrains pipe vibration while still allowing thermal expansion under high loads.

Varying pipe diameters through the 180-degree turn suppress Dean vortices, cutting irrigation gooseneck pressure loss and friction.

Flexible-linked insulating segments protect subsea pipeline field joints from cracking during reel-lay bending while preserving thermal insulation.

A resilient snap-on lower arm replaces cumbersome strap hangers, protecting pipes while speeding attachment to building supports.

Integrated leak collection around floor-penetrating pipe sections helps prevent shaft leakage damage while improving installation safety.

A reinforced isolation element supports riser clamp flanges, spreads load, and limits pad deformation to reduce vibration transfer.

A slidable clamp supports flexible sap tubes of varying diameters to limit kinking, reduce micro-leaks, and simplify installation.

An integrated hanging connector joins flexible sprinkler conduits and support points to cut installation labor while meeting fire code support needs.

A resilient high-friction channel secures catheters to clothing, limiting tube movement while preserving patient comfort and mobility.

A sliding clamp mount lets work lines flex and self-adjust on articulated vehicles, cutting friction, wear, and assembly effort.