Stands/Trestles TRIZ Cases

A recessed bracket and concealed tether secure displayed products while preserving a clean side profile and unobstructed handling.

Interleaved friction layers and cable tension let a segmented support arm hold 3D positions under force without added bulk.

A plastic plane-bearing swivel replaces roller bearings with sliding surfaces and a retainer to cut part count, cost, friction, and maintenance.

A vertically adjustable caddy keeps tools and materials within arm's reach on ladders, reducing trips while improving organization and mobility.

A retractable reel and keyed head unit let users detach and examine a display device freely while maintaining cable and electrical security.

A solar panel and optional battery let a telescopic height-adjustable table stand run its motor without nearby power sockets.

Folding wings and a removable shoe let this watch winder support grip child and adult watch sizes securely with one-handed adjustment.

Movable rods, clamps, and an adjustable tube let one holder fit different container sizes while staying securely mounted in vehicles.

A sidewall-mounted deployable workstation uses a rotating, translating arm to stow compactly yet position larger displays and input devices in front of the seat.

A curved support arm and sliding joint keep a monitor in the same viewing plane while enabling 3D adjustment with fewer visible links.

A fixing pin and positioning holes lock the lift stand in a retracted state, cutting packaging size and assembly complexity.

A scissor frame with guiding wheels and a sliding slot mechanism makes the barbecue oven compact to carry while preventing toppling during folding.

Sloped chip portions in a U-shaped pillar let one detachable support member adjust shelf height while limiting staggering and exposed fittings.

A rotating cleat mount uses clasps, spring return, and a lock to prevent accidental disengagement while keeping device removal simple.

A ball-and-socket securing mount lets crooked tree trunks be tilted, oriented, and locked without cutting while the hollow base adds stability.

Pivotable legs and upper-lower cradles stabilize trees on uneven ground without relying on trunk anchors that fail in soft wood.

Angled, movable shelving creates PrimeZone end caps and hot spots, improving promotional flexibility, shopper engagement, and in-store sales.

A movable stop member and four-bar linkage keep a flat monitor stable while folding from vertical to horizontal, preventing falls and damage.

Arc-shaped deployable legs and vents elevate a laptop for airflow, stable support, and compact transport in Patsnap Eureka.

Slot-shaped fastener openings let cable tray sections expand longitudinally while the splice plate adds support to reduce extra supports and deflection.

Glass-reinforced cable rack arms and stanchions replace corroding metal supports while carrying heavy loads and damping vibration underground.

Pinned modular joints replace welded display supports, cutting weight and simplifying assembly, repair, and touring durability.

Line-contact leg ends and a pivoting back rest isolate amplifiers from floor vibration while keeping the stand compact for transport.

A spring-biased cam lock lets a telescoping vehicle mount hold secure, non-predefined height positions without complex manual locking.

Front-operated release and self-engaging mount kits simplify rack installation and removal while keeping loaded devices secure in crowded racks.

A telescopic wall-member cover hides threaded appliance legs across height settings while snapping on from the front without lifting.

A one-way clutch with torsion spring and cam enables quiet, precise monitor angle adjustment without ratchet noise.

A threaded bushing and drive stud let users adjust a leveling foot from the top, stopping wobble on uneven floors with a compact retrofit design.

A thin resilient mat with partial non-slip surfaces and a carry handle reduces fatigue and slip risk during prolonged standing, kneeling, or sitting.

A rail-and-rung bracket with a split locking tube lets a ladder tray mount securely on either side while adjusting lateral position and angle.

A hinged hanger-retainer keeps a bag accessible while suspending it from a surface to avoid floor damage, soiling, and theft.

Curved elastic arms create friction-fit positioning between the base and casing, cutting parts, assembly steps, and spacing.

A sliding support arm with friction-locking washers lets furniture adapt to uneven floors, keep all feet grounded, and prevent rocking.

A wheeled multi-sided tower with clip-on holders keeps bottles, diapers, toys, and utensils organized and movable in one place.

A telescoping, gas-shock support holds an airflow hood at ceiling registers, cutting manual setup time and enabling multi-register HVAC testing.

A dual-disc friction mount uses a hand-adjustable knob to prevent unwanted rotation and keep monitors level without tools.

Rotating clamp arms and spring compression let one holder securely mount phones and tablets on varied surfaces without rigid threaded interfaces.

A support arm and movable collection tube reduce manual vacuum hose handling, improving collection safety and operator efficiency.

Resilient retainers and an undercut clip secure shelf dividers without tools, cutting installation time and display downtime.

An asymmetric pin-and-collar interface removes the 180° bump in fixed-post rotary shelves while keeping load distribution stable.

Segmented bending regions in a deformable metal blank let a rack unfold quickly while supporting shelf loads without extra joinings.

A lockable base with detent posts secures portable devices without tether cables, reducing alarms, theft risk, and store maintenance.

Spring-loaded pressure sections and a replaceable positioning body let one support plate securely center and clamp different container shapes.

Slot-shaped fastener openings let cable tray sections expand longitudinally while the splice plate supports the run and reduces extra supports.

A threaded post and movable collar enable precise monitor height adjustment without springs or cables, cutting cost and improving appearance.

An oblique dispensing panel enables countertop or towel-bar placement while releasing one interfolded towel at a time for better hygiene.

Segmented side members and a stabilizer let this stand collapse for transport yet assemble into a wide-base support with high load capacity.

Sliding plates, lever guide arms, and springs secure multi-function electronic devices of varying sizes on existing transmit controllers.

An adjustable bracket, rotating angle member, and elastic support let one vehicle camera fit different windshield angles without custom couplers.

A two-space clamping structure secures phones with thick cases or finger rings, improving mount stability and visibility during driving.

A pivoted intermediate attachment lets an exterior vehicle camera pod fold in both directions, improving stability and reducing collision damage.

PCB stator motors add haptic feedback and virtual inertia so lightweight camera heads can deliver smooth pan, tilt, and roll motion.

Dual suction mounting stabilizes vehicle-mounted cameras on bumpy roads and in crosswinds while allowing easier height and angle adjustment.

A detachable support structure enables wall, pole, flush, and flag mounting of outdoor equipment while reducing layout complexity and cost.

Retractable spring-biased grips and a rotating mount hold different accessory sizes and orientations while staying compact when unused.

A bendable metal holder with rubber covering fits different dashboard curvatures while improving mounting stability and reducing assembly complexity.

An integrated dual-motor actuator lets a vehicle mirror head fold and pivot precisely while preserving clearance, visibility, and manual override.

Geometric teeth and a compressed ball-mount insert prevent clamp rotation and self-adjustment under vehicle vibration and shock.

A recessed coil receiver and snap-fit module cut coil spacing below 6 mm, enabling efficient wireless charging through protective cases.

A weighted base and telescoping pole keep an in-vehicle electronics mount stable while placing the screen in view without blocking mirrors.

A spring-loaded top-mount retractor uses magnetic holding to keep personal articles accessible while preventing swing, discomfort, and damage.

Paired X-shaped supports with tunable tension and damping isolate low-frequency whole-body vibration across varying driver masses and speeds.

A 7-shaped handle and side-positioned encoder cut stabilizer weight and thickness while enabling more holding modes with less user fatigue.

A sealed dual-window enclosure lets a vehicle-mounted dual-facing camera capture and transmit data outdoors despite rain and temperature extremes.

A pin-indexed adapter plate enables easy horizontal light adjustment while resisting vibration-driven drift on uneven vehicle surfaces.

Geometric teeth and ball-mount features stop clamp rotation under vibration while preserving device adjustability and holding force.

A plate, end-stop, and sliding lock arrangement secures heavy vehicle radar on a support for stable blind manual mounting and release.

An integrated dual-actuator mirror assembly enables vertical, horizontal, and powerfold movement while preserving clearance for accessories.

A curved base and adjustable arm clamp mobile devices securely on rail control panels, improving viewing ergonomics and braking stability.

A parallelogram constant-force assembly counteracts payload weight to reduce handheld jitter while preserving multi-axis rotation.

A rotatable camera module with an elastic angle adjuster fits different windshield angles, cutting custom mounts and mold cost.

A ball-pivot chamber and looped cable path keep thick connectors routed through the joint without wear or disconnection.

A 7-shaped segmented handle and side-mounted encoder reduce gimbal weight and thickness while adding flexible holding positions with less fatigue.

A guide rail, slider, and screw-adjusted frame reposition calibration targets quickly for accurate vehicle sensor setup across models.

A blind guide and load-bearing support align and lock heavy wall-mounted energy storage units to prevent misalignment and falling.

A spring-loaded pivot cup and ball mount frees rearview housing space for added sensors while keeping secure, adjustable mirror positioning.

A sliding, lockable holder base secures vehicle camera housings on inclined windows and other parts with minimal installation work.

A rotating member with dual joints and locking positions expands suction mount angle adjustment while keeping attached structures stable.

Direct-drive annular PCB motors cut gimbal weight and complexity while aligning rotation axes with the image sensor for precise stabilization.

A worm gear hoist and non-conductive fiberglass arms lift energized conductors safely while improving portability and setup speed.

A rotatable fastener and spring-loaded arm assembly let a vehicle mount switch between rigid locking and easy device position adjustment.

A resilient ball-and-socket mount limits roll and pivot motion to protect camera cables and hold orientation under vehicle vibration.

Interlocking dial and support features let vehicle-mounted holders rotate and slide for secure alignment of long tools in tight mounting areas.

A preset-angle limiting mechanism stops hinge rotation before impact loads can dislodge the lower mount when the upper connection fails.

A rack-and-gear clamp with a reset spring enables one-hand phone insertion and removal while controlling clamping force and avoiding extra buttons.

A movable clamp and cam lever lock a ball head intuitively while securing Picatinny rail attachment to prevent slippage.

An abutting element auto-deploys a nested support stand as the output trays unfold, keeping a portable scanner stable under stacked documents.

A rotatable quick-release bracket lets a pet camera mount securely on walls or desks, expanding viewing angles and simplifying installation.

Guided linkage and a preloaded elastic member smooth pop-up camera motion, absorb impact, and protect thin modules from stutter and damage.

Hinged folding brackets let dual-monitor stands pack into smaller boxes while preserving monitor spacing and setup flexibility.

Spring-assisted rack-and-pinion height adjustment enables precise robotic arm docking while limiting unintended motion and patient force.

Multiple contact surfaces and strap channels let one bracket fit different pipe diameters and orientations while reducing bracket inventory.

A sliding plate and rotating finger-hole grip improve holding stability and comfort without adding awkward manual locking steps.

A manipulation assembly drives transmission and abutting members to quickly release or clamp the camera angle without rotating the tripod.

A switchable wheel-and-friction brake uses screen weight for smooth vertical adjustment while securely holding the chosen position.

A parallelogram mount with guide rollers, elastic bands, and adjustable friction decouples camera motion without complex electronics.

Rotatable lateral members and overlapping top members let one display shelter block ambient light across different screen assembly angles.

Snap-fit engaging beams and hooks replace screws in display back casing mounting, improving assembly and disassembly efficiency.

Rotatable planar links and retention features let this chain flex in-plane while resisting compression, torque, and lateral deflection.

Replaces screw-mounted camera accessories with a magnetic bracket and locking assembly for secure attachment and quick removal.

A mirror-mounted phone holder with built-in lighting improves selfie framing and low-light image quality without a telescopic pole.

An integrated retaining, locking, and safety mechanism prevents accidental plate release while allowing quick, easy camera mounting and removal.

A pivoting housing and elastic member let the folding bracket flex for rocking comfort while helping prevent overturning.

A load-triggered floor contact lets this holding stand transfer support forces into the floor, cutting stand mass and construction complexity.

A sliding channel and stand mount let multi-pad modules detach quickly for storage or replacement without unscrewing the bracket.

Axially offset support rods and pads form a well that stabilizes workpieces and cutting mats, preventing curling, rolling, and ejection.

Offset-stacked control hubs combine multi-protocol ports with clear connection visibility, reducing manual input and centralized control complexity.

A rotating auxiliary bracket and angle adjuster enable stable multi-angle live-stream shooting without frequent camera repositioning.

A multi-axis mount with adjustable jaws and a gimbal improves laser level precision while preserving secure, versatile positioning.

An off-center rotating screen layout lets one display switch between horizontal and vertical tasks without adding bulky support complexity.

A spring-loaded gimbal suspension keeps a towed EM receiver coil self-righting, reducing translation-induced tilt in low-pulse TEM surveys.

A toothed-rack clamp with an actuated movable section secures phones on personal transport vehicles and helps prevent drops.

A deformable tripod top bracket accepts both cylindrical plates and spherical leveling supports for quick leveling and easy removal.

Overlapping inner and outer plates restrain channel wings from bending, keeping a portable device securely coupled under high load.

A rotating movable seat lets the support rod adjust freely without twisting, expanding viewing angles and improving user comfort.

A recessed tracker housing built into a tripod plate secures a camera, preserves tripod mounting, and keeps the tracking device out of sight.

A damped rotating ring pull and magnetic base give a phone case stable 0-110° support, 360° rotation, and easier installation.

A spring-biased hinged base lets side walls close around different electronic devices, saving desk space while adding stable, cushioned support.

An inlaid reinforcement skeleton boosts monopod grip rigidity and support for heavier phones without enlarging the rotating structure.

A pull-activated stand switch and shock-absorbing support reduce accidental tablet stand collapse and vibration damage.

Inclinometers and motors keep pyranometers level automatically, reducing remote manual re-leveling and improving irradiance data reliability.

Layered lighting, mirrors, and a single-sided perspective layer turn a basic 360-degree photo booth into a more engaging visual experience.

A damping member between the lamp head and rotating shaft adds friction to prevent gravity-driven drift and improve pitch angle accuracy.

A stepless adjusting plate and telescopic rod assembly let a 360-degree photo booth bracket lock at any angle for smoother setup and use.

Integrated ducts in the movable tool carriage simplify dust extraction and lubrication while keeping heavy power tools stable and easier to mount.

Independent vision and wireless tracking let a multi-axis gimbal follow targets without phone apps, reducing mobile heat and widening device compatibility.

A gimbal isolates camera motion from the moving RFID reader, enabling stable images and real-time tag association during event authentication.

Three spring-mounted magnetic pads swivel to match curved surfaces, giving a camera mount stronger grip and better stability.

Integrated ducts in the movable carriage manage dust extraction and lubrication while improving heavy tool mounting stability and precision.

A spring-loaded clip holder secures probes of varying sizes with one hand by adjusting aperture force through helical spring turns.

Preset leg-angle stops and a movable actuator let one support adapt to different equipment setups while keeping deployment compact and stable.

A rail-guided sliding and pivoting camera lift frees space in thin displays while reducing circuit interference and stabilizing movement.

A rotating shaft and lamp head connection widens flashlight lighting angles, improving directional illumination for varied shooting use.

Movable legs let a livestock oiler support collapse for shipping and expand for field stability, cutting transport burden without losing durability.

A castellation-set torsion spring tunes tracking speed and balances instrument weight for precise celestial tracking without power.

A hand strap, propping leg, and rotatable attachment help large tablets stay secure in one hand and stable in portrait or landscape use.

A rotatable connecting plate lets the phone clamp fold into the handle, reducing storage footprint while keeping stable camera and phone support.

Continuous two-axis rotation and frequency analysis let an acceleration sensor measure horizontal inclination accurately despite drift.

A sliding, rotating mount moves the webcam beyond the display so the lens faces the table directly without screen capture or trapezoidal distortion.

Rotatable arms, fulcrums, and magnetic locking let a camera stand fold compactly without arm interference while keeping stable imaging.

A motorized rotating base, camera lens, and foldable tripod combine phone holding and subject tracking in one compact livestream setup.

An articulating arm, locking member, and wheels let an overhead scale move between heights and locations without repositioning the item.

A spacer-guided wall mount adds translation, swivel, and tilt adjustment while locking the display in place to prevent unintended separation.

A tuned mass-spring absorber at the cantilever tip counters structural resonance, reducing touchscreen vibration in imaging systems.

A spring-coupled clip holder secures probes one-handed and adjusts holding force for different sizes and weights in calibration baths.

Removable radial extensions and a rotatable hub enable low-cost 360-degree imaging of larger objects without heavy motorized stages.