Pipe Supports TRIZ Cases

An elastic holder with damping holes spaces the drain hose from the cabinet to absorb pump vibration and cut washing machine noise.

Bossed underlayment secures radiant heating wires and lets adhesive layers bond through openings for even heat and a sturdier floor.

A raised gas line cradle and wire passage keep electrical wires below the gas line, reducing rubbing, arcing, and assembly distortion.

See how a split-collar clamp with compression fingers eliminates screws in shower fittings, pre

See how a plug device with Luer fittings secures dialysis drain lines to various drain fixtures

See how segmented drain line routing along rear and side walls prevents sprayer interference, e

See how spaced protrusions secure heating wires, enable adhesive bonding through openings, and

See how segmented spacing members and intermediary support plates fix heat-exchange pipelines i

See how a split-collar clamp with bracket-actuated compression eliminates grub screws, reducing

Aperture-mounted removable clips secure tubes, syringes, and cables while allowing one backing card to be reconfigured for shipping and use.

See how pre-formed loess blocks with integrated U-shaped and curved pipe portions enable fast,

See how a circumferential support structure uses projecting retention walls to secure cables wi

See how a spring-biased retainer replaces screw fasteners to enable quick, damage-free cable ma

See how double-threaded pipe fastening with smooth outer surfaces reduces installation effort,

See how self-supporting inclined tube bundles with hinged couplings and slideable headers elimi

See how a limiting mechanism with bendable members guides drawer-door cables along a preset pat

Clamping channels and a latch secure the power cord and vacuum tube to prevent unplugging, strain, and fitting damage on floor prep equipment.

See how pivoting levers and segmented support mechanisms enable flexible cable volume adjustmen

See how a rigid frame-coupled cable hanger eliminates messenger wires, prevents sharp-edge dama

See how a bracket with curved supports and adjustable housing protects embedded tubes during co

See how pre-integrated air duct, pipe, and cable tray systems within factory modules enable par

See how integrated retention structures constrain cable movement in partially bent configuratio

Protuberances on the expansion valve end plate balance sequential fastener loads, protecting the seal joint from leakage and premature failure.

See how a pre-assembled valve module with adjustable support structure enables off-site fabrica

See how a cradle-based hose holding apparatus stabilizes vacuum truck hoses during debris disch

Stepped recesses and cover ribs separate and secure indoor AC pipes of different sizes, reducing twisting, damage, and leak risk.

See how a saddle-shaped clamp assembly with circular arc geometry enables precise solar panel p

See how electronic information modules attached to ducts replace tracer wires, enabling precise

See how an elongated umbilical with insulating core passageways routes power and water lines th

See how oblique-projection mounts and rigid elongate members reduce bracing assembly spacing wh

A tabbed hoop spaces support cables away from a pliable air duct sidewall, reducing wear and preserving duct shape through inflation cycles.

See how a radially elastic cradle collar with annular interlocking means simplifies duct assemb

See how a central hub and radial spoke framework maintains fabric duct shape when deflated, pre

See how relief abutments on a strap loop immobilize glasses arms, preventing rocking and collis

See how a nested inner tube with smooth fluorine-resin surface inside a metal bellows pipe redu

See how articulated support arms with rotatable coupling reduce bracket complexity and material

Fast-coupling fins, tabs, and fixing pins secure cable duct profiles without welding, simplifying alignment across different profile sizes.

See how a deformable connecting element between rigid guide elements maintains constant cable p

See how a spacing member with guide and wings stabilizes refrigerant pipelines in vacuum space,

See how a fulcrum-based clip pivots to clamp a strut around hanger rods, replacing welding with

See how an external facade mounting device with internal temperature ducts and external supply

See how a monobloc molded conduit with internal partitions and flexible zones eliminates ball j

See how a bracket channel with narrow and wide sections enables 90°–270° rotation without disas

A paper-metal-polymer carrier foil protects the diffusion barrier from handling damage, preserving insulation in Velcro-mounted surface tempering panels.

See how an anti-rotational housing fixes gas supply orifice holder position to prevent misalign

An integrated drain tube attachment fixes tube position and guides condensate through the vent cover to prevent damp RV conditions and mold.

A biased fingerboard latch holds drilling tubulars in storage slots to prevent tipping and falling during rig sway, wind, and offshore motion.

See how biometric sensors and automated reminders adapt sit-stand desk height to user fatigue a

A split, foldable base plate with foam sealing blocks lets thick cables pass through easily while simplifying cabinet maintenance and expansion.

Pivoting jaws and an adjustable mouth let tent accessories mount quickly, reposition easily, and preserve frame stability.

A molded guide organizes expansion cards, cables, and fan mounting to ease tool-less installation while improving airflow and chassis stability.

Weighted-core detachable legs give an IV stand a stable base while allowing compact disassembly for easier shipping and storage.

Moving slits in a refrigerator door water-pipe fixing member let foaming liquid flow evenly, improving insulation and preventing surface dew.

Elastic gripping arms snap gas valves onto the hob pan without screws, cutting assembly time while maintaining secure positioning.

A selective locking joint holds heavy showerheads in position while allowing adjustment without loosening the seal or causing leaks.

Pointed cantilevered barbs raise panel removal force well above installation force, keeping solar panel wiring stable and reducing chafing.

Movable service accessories and internal cable channels let a zoned workstation beam adapt power, data, and layout without fixed mounting waste.

Distributed electronic modules fixed to ducts emit positional signals for accurate mapping and location even when one module fails.

A dielectric-coated steel jib with cradle and ratchet strap blocks arc propagation while securely supporting high-voltage cables.

A push-bar holder clamps mixed-diameter cable bundles in cable trays with uniform pressure, faster assembly, and better electrical shielding.

Magnetic slots and interchangeable spacing elements keep different conduit sizes aligned with consistent spacing, reducing manual measuring and install errors.

Rotating sliding elements release a locked cable holder, making vehicle light source replacement faster and easier without complex repair.

A cam and spring clamp secures drilling rig service lines quickly, reducing obstructions, safety hazards, and line damage.

Elastic concave clip parts secure vehicle elements on limited tank surfaces without welding or gluing, enabling fast installation and removal.

A conductive fluoropolymer bracket replaces failure-prone cable ties to keep tubing connectors continuously grounded and prevent ESD damage.

A roller tube and resilient support ramp let mounted cables translate and rotate, easing torsional and bending stress while simplifying reattachment.

Adhesive strip binding secures cable bundles without self-locking knots, cutting assembly time, waste, and operator strain.

An integrated anchor bracket and multi-cable clips secure tower cables with minimal tools while staying stable through temperature changes.

Adjustable base and intermediate portions let one wire fixture fit different diameters and robotic arm curvatures while maintaining stable fastening.

By placing cable trays below modular pipe frames, this case cuts structure height, lowers center of gravity, and enables safer ground-level installation.

A protruding guide and contact wall make wrong locking insertion visible by causing cover floating, helping workers correct assembly and preserve durability.

Sliding frame mounts on a rigid media beam fit different vehicle frame sizes while simplifying installation and limiting unwanted deflection.

Symmetric protrusions and recesses let identical holder halves align correctly, cutting assembly errors while securely fitting different conduit sizes.

Asymmetric arms and a poka-yoke pin interface stop binder rotation, keeping vehicle lamp cables securely positioned and protected.

An elastic swing element guides robot lines with multidirectional compensation, reducing interference contours, loads, and cable wear.

A lockable rotating cable receiver improves fiber optic routing flexibility and stability in high-density installations.

An elastic support structure lets server connectors shift and deflect to absorb accumulated positional and angular tolerance for stable mating.

A reinforced cable hanger uses a closure member, wire channel, splitter wall, and spacer to improve stiffness, alignment, and heat dissipation.

Elastic arms and overlapping grips let a cable restraint push into a pre-formed hole easily, then spring back for secure reusable fixation.

A reversed-direction clamp arm layout secures cables or tubulars to structures with simple fastener installation, reducing movement and tangling.

Profiled guide strands replace rigid side-wall channels to keep a moving cable carrier on path with lower assembly cost and effort.

A channel-and-cradle tie strap layout secures wire harnesses faster while reducing vibration, abrasion, and moisture exposure.

Uses fiber-reinforced resin columns and S-shaped supports to stack troughs above ground with better rigidity, flexibility, and electrical safety.

A spring-linked clip and frame secure pipes or cables tool-free, balancing low push-in force with strong pull-out retention and vibration damping.

A reversible attachment module and pivoting retainer let one conduit clip securely fit different diameters, reducing part variants and easing installation.

Contoured magnetic cord guides keep utility lines off sharp cubicle corners, preventing insulation damage, worker strain, and cleaning delays.

A spring-linked clip-in mount lets brake pipes push in easily, then lock for higher pull-out force with vibration damping and tool-free assembly.

Prefabricated dust-tight sleeve units let cleanroom line guides add or replace cable bundles without particle-generating wear or full line replacement.

Grooved mounting holes and facing wall parts help a resin wire harness exterior body resist attachment stress, damage, and vibration noise.

Steel retention clips keep stored communication lines fixed to the wall when a plastic POE module melts in a building fire.

Flexible coolant tubes and a pre-assembled T-connector absorb profile tolerances, cut manual assembly, and keep battery cooling joints liquid-tight.

A sealed, rotatable roof conduit mount eliminates flashing, prevents water ingress, and allows 360-degree post-installation adjustment.

Offset locking parts on a partition wall let battery pack guide members route low- and high-voltage wiring while staying compact and strong.

Opposed lips on adjacent coils keep a spiral hose wrap in contact during bending, preventing gaps, cascading overlap, and leakage exposure.

Opposing fasteners let stacked housing modules combine electrical, optical, coaxial, and fluid connector parts while saving assembly space.

Built-in extensions limit cable bending to a set angle, preventing macrobending, signal loss, and fiber damage in dense installations.

Asymmetric poka-yoke mounting and elastic fins keep vehicle cable binders correctly oriented, reducing rotation, misalignment, and cable damage.

An interference-fit channel prepositions the nail or screw, speeding fiber optic cable mounting while reducing tool contact and damage risk.

A rotating fixture lets cryogenic aircraft fuel pipes flex with wing movement while limiting rib loads, thermal transfer, and lightning paths.

A linkage-based span sensor isolates lateral misalignment from vertical and torsional motion, reducing false motor corrections in mobile irrigation.

A spiral retaining guide shapes and secures sprayer feed pipes without pinching, improving installation repeatability and flow reliability.

Pre-attaching and pressure-testing the stop valve in the outlet box avoids pipe cutting, reducing leaks and plumbing installation time.

A rotatable, adjustable cable bracket preserves bend radius and cable separation while keeping modules accessible during OIR.

A 360-degree rotation sleeve with an inner sleeve relieves torsional stress during coiling, helping garden hoses unwind without kinks or tangles.

An elastic through-hole connection isolates plastic hoses from the vehicle frame, cutting noise transmission while maintaining secure clip retention.

Fabric air duct sheaths with plug-in retaining sections simplify fuselage routing, cut installation labor, and reduce duct weight.

A resilient locking member secures a pressure control tube at selectable positions to prevent creep-driven pressure drift in regulators.

A motor-driven circular roller clamp moves along a guide groove to regulate IV tube compression, improving flow precision and reducing slippage.

A screw-adjusted clamp, extension pipe, and movable cradle support heavy pipes horizontally at variable heights for service work.

An elastic rubber hose hanger absorbs decoupling energy, stabilizes brake hose height, and reduces cross-loading and degradation.

A spring-driven hose reel and rotating handle layout reduce manual winding effort while keeping the pressure washer stable.

Transverse leg joints and locking catches create a reusable pipe frame that holds bundles securely without weak slats or extra strapping.

Bent upper-edge lock tabs engage the pipe hanger to stop shield slippage under vibration while protecting insulation and pipe support.

A segmented spacer and shape memory alloy band secure bundled tubes while reducing stress concentration and avoiding permanent joints.

Guide pins and a movable pressing plate simplify ceiling installation of sprinkler-connected firefighting pipes while keeping fixation secure.

Metal particles dispersed in a polymer saddle clamp dissipate electrostatic charge while reducing vibration-driven tubing friction in aircraft fuel tanks.

A support plate with rod receivers and a push button assembly speeds overhead threaded rod installation and enables precise height adjustment.

A cradle-and-clasp hose rack grips vessel beams to secure transfer lines quickly, reducing manual handling, slippage, and hose damage.

A larger-diameter hose and transparent nozzle improve flow, widen spray patterns, and make clogs easy to spot in portable sprayers.

Additively manufactured irrigation clips combine fluid routing and tool attachment to cut setup time, avoid sterilization, and improve dispersion flexibility.

Segmented saddles and insulating standoffs form a concentric load-bearing ring that limits heat transfer in jacketed pipes.

A clamp holder pre-positions and supports bioprocessing pipe clamps, enabling single-handed alignment and secure sealing without extra tools.

Heating the PFA tube end before sleeve insertion creates a shrink-seal joint with high pullout strength and minimal flow restriction.

An elastic return element retracts a variable-length robot cable guide, reducing pulley complexity while keeping cable routing compact and reliable.

A movable lock and perpendicular tubing recesses secure T-shaped pump tubing, preventing accidental dislodgment during medical fluid handling.

Adjustable clamp rails and obtuse-angle elastomer ribs keep pipes aligned while improving drainage, ventilation, and crevice corrosion resistance.

A locking pin and bracket secure HVAC duct film without compression, reducing crimping, air leakage, condensation, and install effort.

A two-level housing and multi-loop tie path simplify cable bundle installation while improving slippage resistance under impulse and short-circuit forces.

A rib-and-gap bracket connector replaces rigid metal ducting, making workshop dust collection easier to install and reconfigure.

Retention lugs on a blanking cap limit axial ejection when a clamp is released under pressure, while maintaining a sealed ferrule connection.

A slider and positioning pin replace complex dual wheels to hold pull-out hoses in place without continuous pulling force.

Telescopic lifting towers and a common drive let pipe supports be raised in place to correct subsidence with less labor and equipment.

A flexible cushion with separated through holes lets one clamp secure multiple lines while reducing chafing, particles, and space demands.

Press-fit collars secure control lines on tubing without screws or welding, enabling safer automated installation in hazardous drill-floor zones.

Magnets and adjustment screws let piping mount securely on curved fuel or gas tanks without welding, drilling, or tank damage.

Folded edge and nut tabs stop vibration-driven nut rotation in pipe hangers, keeping suspended pipes secure and easy to inspect.

An integrated bracket captures the panel and clamps the conduit to cut fasteners, speed HVAC&R assembly, and improve vibration damping.

Segmented composite clamp bodies and planar saddles support auxiliary lines on subsea risers to prevent buckling and vortex-induced vibration.

A built-in spring element secures the cartridge adapter to the sanitary fitting, preventing accidental pull-out and stabilizing fluid connections.

A static cable perch supports and retains rack cables, reducing strain and allowing chassis replacement without rack-side reconfiguration.

An integrated clamp and quick-connect nozzle lets hoses spool neatly with fewer accessories while reducing kinks, twists, and bulk.

Wedged male portions and receiving passages create a removable implement retainer that improves attachment security and resists disconnection and rotation.

Resilient deformable channels secure catheters to clothing, limiting tube movement to reduce discomfort, tripping hazards, leakage, and infection.

A bent bracket flange lifts the pipe-end contact point to spread vibration stress and suppress pipe breakage in moving bodies.

Tapered interlocking teeth let the clamp self-adjust as line diameter shrinks, maintaining subsea clamping force over service life.

An extruded modular duct with evenly spaced ports simplifies passenger service unit attachment while cutting aircraft air-line weight and complexity.

A segmented adhesive strip secures oral or nasal tubes while reducing skin damage, accidental extubation, and cross-infection from reused tape.

A single-resin routing clip uses flexible band supports and snap closure to secure tubes, reduce NVH, and simplify vehicle assembly.