11 results about "Shiplap" patented technology

An integrated joint sealing system that is incorporated into the edges of a sheathing panel, which also may have a factory bonded weather resistive barrier. The edges of each panel are configured as a shiplap joint, or similarly functioning joint, that is present as either an overlap or underlap on each of the four panel edges. The arrangement of the joints are such that one edge will have an overlap and the opposite edge will have an underlap. A flexible gasket material (or materials) is factory applied to one or both sides (underlap and / or overlap) of the shiplap joint. This flexible gasket material, when overlapped with adjacent shiplap panels, provides a weather resistive seal to limit both water and air penetration.

A unique modified shiplap joint with matching or corresponding reverse curves on opposing edges or ends of a piece of siding, each forming one-half of the joint: an underlap edge, and an overlap edge. The respective curves engage and resist or prevent separation of the edges, particularly under a pre-determined wind load. A fastener channel in the underlap section allows for a nail or fastener to be used, while the nail head is then covered by the adjacent overlap section. The respective edges form an angled gap, which is configured to prevent water or rain from entering.

A unique modified shiplap joint with matching or corresponding reverse curves on opposing edges or ends of a piece of siding, each forming one-half of the joint: an underlap edge, and an overlap edge. The respective curves engage and resist or prevent separation of the edges, particularly under a pre-determined wind load. A fastener channel in the underlap section allows for a nail or fastener to be used, while the nail head is then covered by the adjacent overlap section. The respective edges form an angled gap, which is configured to prevent water or rain from entering.

A lap siding or panel siding product with a unique shiplap joint that spaces abutting pieces of lap siding correctly from each other without measurements taken or needed by the installer. The shiplap joint comprises a bottom element and a top element, each extending from the respective piece of lap or panel siding. A set of “tabs” or “hook-tabs” is engineered on or adjacent to the underside of each joint element to space the pieces of lap or panel siding correctly, without requiring measurement during installation. The locations of the tabs or hook-tabs serve as a stop point for placement of the two pieces of lap or panel siding, allowing self-indexing. Post-installation, as the siding pieces expand or elongate length-wise or laterally, the two tabs or hook-tabs move away from each other, thereby allowing expansion and / or elongation without distortion or warping of the siding pieces.

A modular vault is comprised of a plurality of side walls. One of the side walls has an access opening for a door (reinforced or vault doors). Each of the plurality of side walls is designed from prefabricated frames of known widths (e.g., 16 inches, 32 inches, 48 inches). Each frame is configured with first narrow openings for receiving vertically oriented studs and with second larger openings for receiving a protective metal plate. Integrated wiring access passages are located within the prefabricated frames. By use of this arrangement, the exterior and interior of the modular vault may include various types of sheeting (e.g., shiplap, drywall, wood paneling, plywood) to provide an aesthetically pleasing look to the modular vault.

A lap siding or panel siding product with a unique shiplap joint that spaces abutting pieces of lap siding correctly from each other without measurements taken or needed by the installer. The shiplap joint comprises a bottom element and a top element, each extending from the respective piece of lap or panel siding. A set of “tabs” or “hook-tabs” is engineered on or adjacent to the underside of each joint element to space the pieces of lap or panel siding correctly, without requiring measurement during installation. The locations of the tabs or hook-tabs serve as a stop point for placement of the two pieces of lap or panel siding, allowing self-indexing. Post-installation, as the siding pieces expand or elongate length-wise or laterally, the two tabs or hook-tabs move away from each other, thereby allowing expansion and / or elongation without distortion or warping of the siding pieces.

A vacuum insulated panel having an external skin and an internal core which together delimit channels and / or cells that are vacuously isolated from one another to ensure that the vacuum is robustly maintained while also providing a safeguard against system-5 wide failure, should the vacuum in one channel or cell be compromised, the vacuum insulated panel being configured for use independently or arranged in a succession with other such panels where shiplap, tongue-in-groove, and other geometries may be used to facilitate joinery and reduce thermal bridging.

This item is a sauna room characterized by the exterior of the front and back, the exterior from the side to the upper part, the shape of the bottom, and the shape seen from the front or back (a semi-oval that is slightly vertically elongated). A door leading to the interior is provided on the front side of this item, and one can enter and exit by opening and closing the door. In this item, sauna equipment (sauna stones, heaters, etc.) can be installed indoors, and by closing the door, the interior is filled with steam and becomes a sauna. A lamp for entering at night is provided on the upper right side of the door of this item. Ventilation openings, which are essential for the function of the sauna, are provided at the lower part of the front side and the lower part of the back side of this item. A small window is provided on the back side of this item. The surface of this item shows the texture of wood overall. By constructing the exterior of the front, back, and side parts of this item with wooden boards in a shiplap style, it has a composition that is resistant to wind and rain and durable against the humidity and temperature inside. Also, by making the shape a semi-cylindrical shape of a slightly vertically elongated oval with a flat bottom, both the stability of the feet when entering and the design are achieved.

This article is a sauna room characterized by the exterior from the side to the upper part and the shape of the bottom. A door leading to the interior is provided on the front side of this article, and one can enter and exit by opening and closing the door. In this article, sauna equipment (sauna stones, heaters, etc.) can be installed indoors, and by closing the door, the interior is filled with steam to become a sauna. A lamp for entering at night is provided on the upper right side of the door of this article. A ventilation opening essential for the function of the sauna is provided at the lower part of the back side of this article. A window is provided on the back side of this article. The surface of this article shows the texture of wood overall. By constructing the exterior of the side part of this article with wooden boards in a shiplap style, it has a composition that is resistant to wind and rain and durable against the humidity and temperature inside. Also, by making the shape a semi-cylindrical shape with a flat bottom, both the stability of the feet when entering and the design are achieved.

An integrated joint sealing system that is incorporated into the edges of a sheathing panel, which also may have a factory bonded weather resistive barrier. The edges of each panel are configured as a shiplap joint, or similarly functioning joint, that is present as either an overlap or underlap on each of the four panel edges. The arrangement of the joints are such that one edge will have an overlap and the opposite edge will have an underlap. A flexible gasket material (or materials) is factory applied to one or both sides (underlap and / or overlap) of the shiplap joint. This flexible gasket material, when overlapped with adjacent shiplap panels, provides a weather resistive seal to limit both water and air penetration.

A multi-layered integrated roofing plank or panel with a base layer comprising engineered or manufactured wood, a water resistant barrier layer covering at least the outer face of the base layer, and at least one of the edges of the base layer. A texturizing material also may be affixed to, or integrated with, the water resistant barrier layer. The edges of the roofing plank or panel may be configured as part of a joint with adjacent planks or panels, including, but not limited to, shiplap joints, tongue-and-groove joints, bead-and-cove joints, butt joints, or combinations or variations thereof.