29 results about "Color design" patented technology

1. The name of the design product: total solid determination instrument and its main body. 2. The use of the design product: for total solid determination instrument and its main body. 3. The design points of the design product: in the shape, pattern and color as shown in design 1, design 3 and design 4, the shape and pattern as shown in design 2. 4. The picture or photo that best indicates the design points: design 1 perspective view. 5. Design 1 is designated as the basic design. 6. Other circumstances that need to be explained: the design 1, 3 and 4 of the design to be protected contain color; the part of the design 3 and 4 that is shown as blurred is not required to be protected.

1. Name of the product in this design: Computer terminal panel. 2. Purpose of this design: This product is used to be attached to the operating area of ​​a computer terminal to indicate the operation buttons. 3. The key design features of this product are: the pattern and color of the product in Design 1; and the pattern of the product in Design 2. 4. The image or photograph that best illustrates the design's key points: Design 2 main view. 5. The back of this design product is a part that is not easily seen or cannot be seen during use, so the rear view is omitted; this design product is a thin product, so the left view, right view, top view, and bottom view are omitted. 6. Design 2 is designated as the basic design. 7. Other situations requiring explanation: Design 1 requires color protection.

1. The name of the designed product: label (gold 98 bottle). 2. The use of the designed product: for label. 3. The design points of the designed product: design 1 lies in the shape, pattern and color of the product; design 2 lies in the shape and pattern of the product. 4. The picture or photo that best indicates the design points: design 1 component 1 front view. 5. The designed product is a flat product, and other views are omitted. 6. Design 1 is designated as the basic design. 7. Other circumstances that need to be explained Component description: component 1 is the main label, component 2 is the neck label, and component 3 is the back label. 8. Other circumstances that need to be explained Other description: design 1 requests protection of color.

1. The name of the design product: comb handle (202601). 2. The use of the design product: for comb handle. 3. The design points of the design product: in the combination of shape and color. 4. The picture or photo that best shows the design points: design 1 perspective view. 5. The design to be protected contains color. 6. Design 1 top view, design 1 bottom view, design 2 top view, design 2 bottom view, design 3 top view, design 3 bottom view design 4 top view, design 4 bottom view are not common faces, omit design 1 top view, design 1 bottom view, design 2 top view, design 2 bottom view, design 3 top view, design 3 bottom view design 4 top view, design 4 bottom view. 7. Other circumstances that need to be explained Other explanation: specify design 1 as the basic design.

The utility model provides a cabinet body plate connecting structure and a cabinet body, relates to the technical field of furniture, and aims to solve the problems that in the prior art, the color matching effect between cabinet body plates designed in a color matching mode is distributed in a fragmented mode, and the whole cabinet body plates are visually split. Each of the first plate and the second plate comprises three plate layers, the color of the middle plate layer is different from that of the plate layers on the two sides, a connecting groove is formed in the first plate, the depth of the connecting groove is at least equal to the thickness of one plate layer, a connecting part matched with the connecting groove is arranged on the second plate, and the connecting part is matched with the connecting groove. The second plate block and the first plate block are connected in a matched mode through the connecting part and the connecting groove. The cabinet body plate connecting structure can form a continuous colored tape, so that the color matching effect is coherent, the overall effect is coordinated, the defect that the butt joint colored tape of an existing color matching plate is broken is overcome, and the cross section of a heterochromatic layer in the middle of the side edge is prevented from being exposed.

1. The name of the designed product: packaging box (Majestic Horse Sending Good Fortune). 2. The use of the designed product: packaging for ceramic products. 3. The design points of the designed product: the combination of patterns and colors. 4. The picture or photo that best indicates the design points: design 1 perspective view. 5. The design protected contains colors. 6. Design 1 right view is the same as design 1 left view after rotating 180 degrees clockwise, omitting design 1 right view; design 1 bottom view is the same as design 1 top view after rotating 180 degrees clockwise, omitting design 1 bottom view; design 2 right view is the same as design 2 left view after rotating 180 degrees clockwise, omitting design 2 right view; design 2 bottom view is the same as design 2 top view after rotating 180 degrees clockwise, omitting design 2 bottom view. 7. Design 1 is designated as the basic design.

1. Name of the product in this design: Picture Frame (Green Field). 2. Purpose of this design: This design is used for storing and placing photographs. 3. The key design elements of this product are the combination of shape, pattern, and color. 4. The image or photograph that best illustrates the design's key points: Design 2 main view. 5. The design for which protection is sought includes color. 6. The left view of Design 2 is the same as the right view of Design 2, so the left view of Design 2 is omitted; the bottom view of Design 2 is the same as the top view of Design 2, so the bottom view of Design 2 is omitted. 7. Design 1 is designated as the basic design.

1. Name of the product in this design: Silk scarf. 2. Purpose of this design: for wearing and decoration. 3. The key design features of this product are its pattern and color design. 4. This design requests protection for color. 5. The image or photograph that best illustrates the design's key points: the front view.

1. The name of the present design product: the wheel of the cart. 2. The use of the present design product: the wheel of the cart. 3. The design points of the present design product: the combination of shape and color. 4. The picture or photo that best indicates the design points: design 1 front view. 5. The design protected contains color. 6. Design 2 right view and design 2 left view are symmetrical, omit design 2 right view; design 2 bottom view and design 2 top view are symmetrical, omit design 2 bottom view; design 4 bottom view and design 4 top view are symmetrical, omit design 4 bottom view; design 4 right view and design 4 left view are symmetrical, omit design 4 right view. 7. Design 1 is designated as the basic design.

1. Name of the product in this design: Body of a cleaning component. 2. Purpose of this design: The entire product and the part for which protection is sought are used to connect a cleaning component to a floor brush of a cleaning device. 3. The key design features of this product are the shape of the part for which protection is sought. 4. The picture or photo that best illustrates the key design points: Design 1 3D diagram 1. 5. Design 1 is designated as the basic design. 6. Other situations requiring explanation: This design product requests partial design protection. The dark gray drawn area is the part not for which protection is requested, and the remaining part is the part for which protection is requested. The partial design for which protection is requested does not include color. 7. Part A in Design 2 is made of transparent material.

1. The name of the designed product: comb handle (202602). 2. The use of the designed product: for comb handle. 3. The design points of the designed product: the combination of shape and color. 4. The picture or photo that best shows the design points: design 1 perspective view. 5. The design protected contains color. 6. Design 1 top view, design 1 bottom view, design 2 top view, design 2 bottom view, design 3 top view, design 3 bottom view design 4 top view, design 4 bottom view are not common faces, omit design 1 top view, design 1 bottom view, design 2 top view, design 2 bottom view, design 3 top view, design 3 bottom view design 4 top view, design 4 bottom view. 7. Other circumstances that need to be explained Other explanation: specify design 1 as the basic design.

1. Name of the product in this design: Pot support and its main body. 2. Purpose of this design: The pot support is used to hold pots, and the main body is used to connect the feet of the pot support. 3. The key design feature of this product is its shape. 4. The picture or photo that best illustrates the key design points: Design 3 3D diagram 1. 5. The front view and rear view of each design are the same, and the left view and right view are the same. The rear view and right view of each design are omitted. 6. Design 3 is designated as the basic design. 7. Other situations requiring explanation: Designs 1, 3, 5, 7, and 9 are partial appearance designs. The main body of the pot support is to be protected. The main body is the part excluding the gray color block. The appearance design to be protected does not include color. Designs 2, 4, 6, 8, and 10 request protection for the pot support.

1. Name of the product in this design: Ruler. 2. Purpose of this design: For measuring length. 3. The key design features of this product are: the pattern design on the surface of the measuring tape (Design 1); and the combination of pattern and color design on the surface of the measuring tape (Design 2). 4. The picture or photo that best illustrates the key design points: Design 1 front view. 5. No back design, rear view omitted; left side view omitted for thin products; right side view omitted for thin products; top view omitted for thin products; bottom view omitted for thin products. 6. Design 1 is designated as the basic design. 7. Other situations requiring explanation: Design 2 requests protection of the combination of color and pattern. Because the design is elongated, two enlarged images are provided.

The application discloses a color matching method and system based on a Munsell full-color-range gridding color mixing model, relates to the theory and technology of color design and full-color-range color matching of dye solution, color master batch and ink in the textile, high polymer material and printing industry.The method is based on five main colors, north polar white and south polar black actually obtained, sequentially gives the method for constructing a Munsell equatorial hue ring, a gray axis, an edge color block and an intermediate color block, and constructs a hue system, a lightness system, a chroma system and a full-color-range gridding color mixing model, and associates the color value of each color block, the mixing concentration of the primary colors and the grid point coordinate position, so that a designer can directly obtain the mixing concentration ratio of each primary color according to the constructed digital color spectrum when performing color matching, and compared with the existing color matching method relying on experience and visual observation, the application can greatly improve the color matching efficiency and color matching accuracy.

1. Name of the product in this design: Vest. 2. Intended use of this design: for wearing. 3. The key design points of this product are: Design 1: the combination of shape and color; Design 2: the shape. 4. The picture or photo that best illustrates the key design points: Design 1 front view. 5. This design is for a thin product, and the left, right, top, and bottom views of each design are omitted. 6. Design 1 is designated as the basic design. 7. Other situations requiring explanation: Design 1, the design for which protection is sought, includes color. 8. Design 1. The long horizontal label on the left chest of the main view is the area for attaching the logo or graphic label. The label can be fixed or use a replaceable attachment method. Design 2: The area framed on the left chest in the main view and the rectangular areas framed in the four corners in the rear view are the areas for attaching logos or graphic labels. The labels can be fixed or use a replaceable attachment method. The black outline in the second view only indicates the selected label area, not the pattern or seam lines on the garment surface.

1. Name of the product in this design: Installation machine. 2. Intended use of this design: for transporting and installing sheet materials, such as photovoltaic panels or waterproof panels. 3. The key design points of this product are: Design 1 is the shape and color of the product, and Design 2 is the shape of the product. 4. The image or photograph that best illustrates the key design points: Design 1 3D view. 5. The design for which protection is sought includes color. 6. Design 1 is designated as the basic design.

1. Name of the product in this design: Wine Bottle (1). 2. Purpose of this design: For packaging alcoholic beverages. 3. The key design features of this product are the combination of shape and color. 4. The image or photograph that best illustrates the key design points: Design 1 3D view. 5. Design 1 is designated as the basic design. 6. Other situations requiring explanation: Design 2, which is to be protected, includes color, while Design 1 does not.

1. The name of the present design product: wine bottle. 2. The use of the present design product: for containing wine. 3. The design points of the present design product: in the combination of shape and color. 4. The picture or photo that best shows the design points: design 1 front view. 5. The design claimed contains color. 6. The views omitted in designs 1-10 have been shown on other views, omitted. 7. Design 1 is designated as the basic design.

1. Name of the product in this design: Control device for clothing processing equipment. 2. Application of this design: The entire design is used for washing, dehydrating, drying and other processing of clothing, and the protected part is used as a control device for clothing processing equipment. 3. The key design features of this product are the shape that needs to be protected. 4. The image or photograph that best illustrates the key design points: Design 1 3D view. 5. Design 1 is designated as the basic design. 6. Other situations requiring explanation: Other explanation: Designs 2 and 4 for which protection is sought include color. The parts indicated by dashed lines and those covered in red in the design do not require protection.

1. Name of the product in this design: The main body of the graphical user interface for displaying the working status of an electronic device. 2. Intended use of this design: for use as an electronic device. 3. The key design features of this product are the parts of the graphical user interface for which protection is sought. 4. The picture or photo that best illustrates the key design points: Design 1 front view. 5. The design for which protection is sought includes color. 6. Design 1-2 and other views have no design points, so design 1-2 and other views are omitted. 7. Design 1 is designated as the basic design. 8. Purpose of Graphical User Interface: A graphical user interface is used for human-computer interaction and to realize the functions of electronic devices. It can also be used to display the working status information of the device, such as time, temperature, humidity, vapor pressure, and the working mode of the device. The part of the graphical user interface that is requested for protection is the main body of the graphical user interface. 9. Human-computer interaction methods of graphical user interface: The graphical user interface can be interacted by clicking, pressing or swiping the graphical user interface, or by operating physical or non-physical buttons on the electronic device, or the interaction can also be realized by remotely operating the graphical user interface of the electronic device through an application on a mobile terminal. 10. Other situations requiring explanation: Other explanation: Design 1 requests protection for the color, and the dashed line does not constitute part of the design for which protection is requested.

1. Name of the product in this design: Label (Draft Beer). 2. Purpose of this design: For labeling. 3. The key design points of this product are: Design 1 is the shape, pattern and color of the product; Design 2 is the shape and pattern of the product. 4. The image or photograph that best illustrates the design's key points: Design 1 Component 1 Main View. 5. This design is a two-dimensional product; other views are omitted. 6. Design 1 is designated as the basic design. 7. Other situations requiring explanation: Component 1 is the main label, and component 2 is the back label. 8. Other situations requiring explanation: Design 1 requests color protection.

1. The name of the present design product: label (gold 98). 2. The use of the present design product: for label. 3. The design points of the present design product: in design 1, 3, 5, the shape, pattern and color of the product; in design 2, 4, 6, the shape and pattern of the product. 4. The picture or photo that best indicates the design points: design 1 front view. 5. The present design product is a plane product, and other views are omitted. 6. Design 1 is designated as the basic design. 7. Other circumstances that need to be explained: design 1, 3, 5 requests protection of color.