3879results about "Energy recovery in ventilation and heating" patented technology

A roof top cooling unit has an evaporative cooling section that includes at least one evaporative module that pre-cools ventilation air and water; a condenser; a water reservoir and pump that captures and re-circulates water within the evaporative modules; a fan that exhausts air from the building and the evaporative modules and systems that refill and drain the water reservoir. The cooling unit also has a refrigerant section that includes a compressor, an expansion device, evaporator and condenser heat exchangers, and connecting refrigerant piping. Supply air components include a blower, an air filter, a cooling and / or heating coil to condition air for supply to the building, and optional dampers that, in designs that supply less than 100% outdoor air to the building, control the mixture of return and ventilation air.

An integrated ventilation unit configured to provide ventilation and conditioned air to an indoor space may include a heat pump system, an energy recovery device and a control unit. The heat pump system may include a first coil located at a supply air side of the ventilation unit, a second coil located at an exhaust air side of the ventilation unit, and a compressor. The energy recovery device may be configured to transfer heat between a return air stream and a supply air stream and the control unit may be configured to control operation of the heat pump system and the energy recovery device.

A self-contained air conditioner unit incorporates an energy recovery ventilator portion that brings about several changes of room air per hour with outdoor fresh air. There is an outdoor air intake plenum which furnishes the fresh air and the condenser air for the condenser coil, and a return air plenum. Air from the room return air plenum is HEPA filtered and conducted to the evaporator coil and evaporator fan, and is supplied back into the conditioned space. The energy recovery ventilator has a counterflow heat exchanger core situated between the return air plenum and the fresh air intake plenum, as well as two ventilation fans, one (or both) of which may be of variable or multiple speed. By controlling the fan speeds, it is possible to produce a neutral pressure, a positive or overpressure, or a negative or underpressure in the conditioned space. The unit can be wheeled into place and installed easily by personnel without special training. The unit can be scaled up in size and capacity for a larger room or whole house applications, or scaled down for smaller rooms or window mounting.

A core unit for an energy recovery system for exchanging heat and vapor between two independent intake and exhaust airstreams without intermixing thereof, the core unit having a fibrous microporous support substrate and a sulfonated block copolymer having at least one end block A and at least one interior block B wherein each A block contains essentially no sulfonic acid or sulfonate ester functional groups and each B block is a polymer block containing from about 10 to about 100 mol percent sulfonic acid or sulfonate ester functional groups based on the number of monomer units, and wherein the sulfonated block copolymer is laminated on the microporous support substrate

An air delivery system may include a housing, a first liquid-to-air membrane energy exchanger (LAMEE), and a desiccant storage tank. The housing includes a supply air channel and an exhaust air channel. The first LAMEE may be an exhaust LAMEE disposed within an exhaust air channel of the housing. The exhaust LAMEE is configured to receive the outside air during a desiccant regeneration mode in order to regenerate desiccant within the exhaust LAMEE. The desiccant storage tank is in communication with the exhaust LAMEE. The exhaust LAMEE is configured to store regenerated desiccant within the desiccant storage tank. The regenerated desiccant within the desiccant storage tank is configured to be tapped during a normal operation mode.

A sensing device for sensing an emergence situation having an acceleration sensor and a method thereof are provided. The sensing device includes acceleration sensing means, blood pressure / pulse sensing means, comparing means, communication means, and a controller. The accelerating sensing means senses acceleration generated due to movement of the body and the blood pressure / pulse sensing means senses a blood pressure and a pulse of a user. The comparing means compares acceleration, a blood pressure, and a pulse with a reference acceleration, a reference blood pressure, and a reference pulse, generates an acceleration abnormal signal, a blood pressure abnormal signal, and a pulse abnormal signal, and outputs an emergency situation signal. The communication means transmits the emergency situation signal to an external apparatus through a communication network and the controller controls the communication means to transmit the emergency situation signal to the external apparatus if an emergency situation signal is generated from the comparing means.

This invention relates to an energy-saving central air conditioning system, which comprises cold and hot water source host, terminal device and the control system to adjust and monitor. The said control system processes according to the large amount of data collected to get the needed optimized status operation orders. It real-time adjusts the each part load of the system into cold storage or cold discharging modes and the said host works under the mode of cold storage and stops working in cold discharging mode.

An air conditioning system for conditioning the space within an enclosure having at least one inlet and one outlet, the system comprising first and second liquid / air heat exchangers; the first heat exchanger having an opening for receiving fresh air from the environment and for propelling the fresh air through the first heat exchanger to exchange heat with the liquid before it is entered into the enclosure, and the second heat exchanger having an opening for receiving air from the enclosure and for propelling it through the second heat exchanger to exchange heat with the liquid before it is expelled into the atmosphere. There are also provided methods for air-conditioning an enclosed space and for evaporation of industrial wastes.

A desiccant air conditioning system for treating an air stream entering a building space, including a conditioner configured to expose the air stream to a liquid desiccant such that the liquid desiccant dehumidifies the air stream in the warm weather operation mode and humidifies the air stream in the cold weather operation mode. The conditioner includes multiple plate structures arranged in a vertical orientation and spaced apart to permit the air stream to flow between the plate structures. Each plate structure includes a passage through which a heat transfer fluid can flow. Each plate structure also has at least one surface across which the liquid desiccant can flow. The system includes a regenerator connected to the conditioner for causing the liquid desiccant to desorb water in the warm weather operation mode and to absorb water in the cold weather operation mode from a return air stream.

A cogeneration system is disclosed which includes a generator, a drive source for driving the generator, a waste heat supplying heat exchanger for enhancing the heating performance of a heat pump type air conditioner, an auxiliary heating heat exchanger using the waste heat of the drive source as a heat source for heating indoor air, and a regeneration heat supplying heat exchanger using the waste heat of the drive source as a heat source for regenerating a dehumidifier. The cogeneration system can use the waste heat of the drive source for diverse purposes in accordance with the indoor environment, and can have a maximal efficiency.

An energy recovery ventilator and method for monitoring and maintaining an environmental condition inside a structure such as a house, building, or dwelling is provided. The ventilator may include a housing having mating halves of a molded polymeric material, first and second chambers disposed within the housing to convey separate first and second streams of air, a heat exchanger configured to intersect the first and second chambers, a first fan to circulate the first air stream through the first chamber, a second fan to circulate the second air stream through the second chamber, and a fan motor driving the first and second fans. The ventilator may also be configured to prevent frost build-up in or on the energy ventilator, to provide efficient cooling, and maintain one or more desired environmental conditions.

A reproducing apparatus for reproducing data from a record medium having a program area and a management area, the program area being used for recording a plurality of files, the management area being used for managing forging prohibition information against a particular file recorded in the program area is disclosed, the apparatus comprising a calculating means for calculating the forging prohibition information managed in the management area of the record medium whenever a file recorded in the recorde medium is reproduced, a comparing means for comparing a value calculated by the calculating means corresponding to a former reproduction command with a value calculated by the calculating means corresponding to a current reproduction command, and a controlling means for permitting the file corresponding to the current reproduction command to be reproduced when the value calculated corresponding to the former reproduction command is the same as the value calculated corresponding to the current reproduction command as the result of the comparing means.

This invention relates in general to air exchange systems and, in particular, to an improved energy recovery ventilator, a cross flow plate core associated therewith and a method of conditioning air for a building. In one aspect, the invention provides a cross flow plate core comprising: a left hand wafer comprising a left hand spacer with a first of a plurality of membranes bonded thereto, the left hand spacer comprising a plurality of parallel curvilinear rails which form channels for receiving a first stream of air; and a right hand wafer comprising a right hand spacer with a second of the plurality of membranes bonded thereto, the right hand spacer comprising a plurality of parallel curvilinear rails which form channels for receiving a second stream of air, wherein the left hand spacer of the left hand wafer is bonded to the top of the membrane of the right hand wafer.

A heat pump system is operable in winter mode and / or summer mode, and may be selectively operated in a defrost mode or cycle. The system includes an energy recovery module that receives and conditions air in a regeneration air channel. A pre-processing module is positioned downstream of the energy recovery module. The pre-processing module receives and heats air from the energy recovery module. A regeneration air heat exchanger is positioned downstream of the pre-processing module. The regeneration air heat exchanger receives and conditions air from the pre-processing module. The pre-processing module heats the air from the energy recovery module to increase efficiency of the regeneration air heat exchanger. During the defrost mode, a loop of regeneration air may be recirculated between the supply air channel and the regeneration air channel in order to defrost the regeneration air heat exchanger.

A digital predistorter compensates for nonlinear distortion of a power amplifier using a power series model. The digital predistorter includes a distortion generating unit configured to introduce a nonlinear distortion component of a prescribed order into a digital input signal supplied to the digital predistorter. The distortion generating unit has a multiplier configured to raise the digital input signal to a power consistent with the prescribed order of the nonlinear distortion component, and a finite impulse response filter connected in series with the multiplier. The digital predistorter also includes an adaptive controller configured to receive a reference signal and adaptively adjust the tap coefficient of the finite impulse response filter so as to bring the reference signal to a desired level.

A system for providing liquid refrigerant subcooling by means of evaporative cooling utilizing the condensate water of said air conditioner, refrigeration / heat pump system and / or other water supply to wet the surface of the subcool heat exchanger and pass the dry exhaust air across the wetted surface of the subcool heat exchanger. A system for providing hot gas discharge refrigerant precooling into the primary condenser of an air conditioner, refrigeration or heat pump system by evaporative cooling utilizing the condensate water of said system and / or other water supply to wet the surface of the precool heat exchanger and then passing the cold, dry exhaust air across the wetted surface of the precool heat exchanger. A combination subcooler / precooler system where the cold dry building exhaust air is used to evaporatively subcool the liquid refrigerant in the water wetted (or dry) subcooler and then used to conductively cool the hot gas refrigerant.

A remote performance monitor to acquire monitoring data concerning an air-conditioning system of a monitoring target building and to determine an operating condition of the air-conditioning system, the remote performance monitor comprises a monitoring data receiver (11), a characteristic function calculator (12) and an operating condition calculator (13). The monitoring data receiver (11) receives monitoring data from a monitoring data collecting apparatus in the monitoring target building. The monitoring data is data concerning performance characteristics of air-conditioning machines installed in the air-conditioning system of the monitoring target building. The characteristic function calculator (12) calculates a characteristic function for the monitoring target building and for each of the air-conditioning machines based on the monitoring data. The operating condition calculator (13) calculates operating condition data to minimize a sum of amounts of energy consumed by the air-conditioning machines by using the characteristic function.

It relates to an energy utilization and recovery unit type all-air air conditioning system in heat ventilation and air conditioner engineering. It comprises return bellow, exhaust bellow, entry bellow and new bellow, with exhaust valves set between the return and exhaust bellows, return valve set between the return and entry bellows, new valve set between the entry and new bellows and by-pass valve between the new and exhaust bellows. The return bellow is made of air return, controller and return air filter. The exhaust bellow is made of exhaust outlet, exhaust machine and exhaust condenser. The entry bellow is composed of entry, reheated condenser, entry machine, humidifier, and evaporator. And the new bellow is composed of new wind filter, new wind inlet, and compressor. Through optimized combination of all the bellows, program self controlled running for corresponding air flow channels regulating under different running conditions, it can realize the best energy utilization and recovery. The all-air air conditioning system can be used for big space air conditioner, multi process air conditioner and those demanded whole year running.

An apparatus for ventilation systems includes an element for the transfer of heat from warm exhaust air (taken from inside a building) to cooler exterior fresh air which is drawn into the building. The present invention in particular provides an apparatus whereby, during a defrost cycle, interior air may circulate through both of the fresh air and exhaust air paths for delivery back into the building, i.e. the warm interior air, used as defrost air, may be able to circulate from the interior of the building into the ventilation apparatus and back to the interior of the building. The apparatus can thus use interior air as defrost air while diminishing or avoiding the creation of a negative air pressure in the building.

Coated membranes comprise a porous desiccant-loaded polymer substrate that is coated on one surface with a thin layer of water permeable polymer. Such membranes are particularly suitable for use in enthalpy exchangers and other applications involving exchange of moisture and optionally heat between gas streams with little or no mixing of the gas streams through the membrane. Such membranes have favorable heat and humidity transfer properties, have suitable mechanical properties, are resistant to the crossover of gases when the membranes are either wet or dry, and are generally low cost.

A transportable PCM (phase change material) module comprises anumber of PCM packs; a housing for thermally insulting said number of PCM packs from a module's surrounding medium; spaces separating said packs and forming one or more channels for the flow of a fluid; said housing incorporating a fluid inlet and a fluidoutlet; whereby, in use, fluid flows through said channels from said inlet to said outlet.A PCM (phase change material) pack comprises a laminate of a first conducting panel and a second conducting panel enclosing a portion formed primarily of PCM; wherein said portion of PCM incorporates thermal conductors. A PCM (phase change material pack) comprises an envelope of relatively highly thermally conductive material enclosing a portion formed primarily of PCM; wherein said PCM portion incorporates a conductive compound mixed into said PCM which comprises carbon black particles.

The objective of the present invention is to provide a system which allows efficient air-conditioning heat recovery during ventilation and is applicable to ordinary housing. In order to achieve the above objective, a central ventilation fan 110 is connected to a heat exchanger 120 via a ventilation pipe. Air collected in the central ventilation fan 110 is emitted via the heat exchanger 120 from a device after recovering heat from heated exhaust air from each room by the heat exchanger 120. On the other hand, the heat exchanger 120 is connected to a tank 130 via a water suction / drainage pipe. Water drawn up from the tank 130 by a pump 140 is heated by the heat exchanger 120 and then returned to the tank 130 again. The heat exchanger 120 uses the Peltier device to cool the exhaust air from the central ventilation fan 110, and heat water in the tank 130 at the same time, thereby efficiently transferring air heat from each room to water. Efficient transfer of heat using the Peltier device allows a higher temperature of the water from the heat exchanger than the exhaust air temperature.

A dehumidifier unit for pre-conditioning air delivered to a multiplicity of separate refrigeration air conditioner units and especially ductless systems where the compressor-condenser unit is separate from the fan-coil unit, and assisted by heat pipe transfer of heat from air dehumidified through a desiccant wheel and by heat of compression from the condenser of one compressor-condenser unit, and with a heater to maintain the temperature of regeneration air through the wheel, one dehumidifier unit pre-conditioning air for a multiplicity of refrigeration air conditioners or fan-coil units.

A self-contained air conditioner unit incorporates an energy recovery ventilator portion that brings about several changes of room air per hour with outdoor fresh air. There is an outdoor air intake plenum which furnishes the fresh air and the condenser air for the condenser coil, and a return air plenum. Air from the room return air plenum is HEPA filtered and conducted to the evaporator coil and evaporator fan, and is supplied back into the conditioned space. The energy recovery ventilator has a counterflow heat exchanger core situated between the return air plenum and the fresh air intake plenum, as well as two ventilation fans, one (or both) of which may be of variable or multiple speed. By controlling the fan speeds, it is possible to produce a neutral pressure, a positive or overpressure, or a negative or underpressure in the conditioned space. The unit can be wheeled into place and installed easily by personnel without special training. The unit can be scaled up in size and capacity for a larger room or whole house applications, or scaled down for smaller rooms or window mounting.

Disclosed are a hybrid desiccant dehumidifying apparatus and a control method thereof which are employed under poor environment, such as a ship painting field. External air cooled by an evaporator is dehumidified and heated while passing through a desiccant dehumidifier and external air heated by condensation heat of a condenser is supplied to the desiccant dehumidifier as a regeneration air source such that high-temperature and high-humidity regeneration. A cooler is integrally formed with the desiccant dehumidifier so that the hybrid desiccant dehumidifying apparatus is manufactured in a compact size and the operating cost thereof is significantly reduced.

The invention relates to the field of heating ventilation air conditioners, in particular to an improved air treatment method and a fresh air conditioner device. The invention improves the problems of traditional fresh air treatment and air conditioners and particularly emphasizes that a plate-type air-air heat exchanger and indirect water evaporative cooling are used for recycling energy of sensible heat and latent heat in air exhaust in the fresh air treatment process of damp and hot regions in summer and condensed water is directly evaporated on an evaporator to improve the working condition of a compressor. Under the condition of quantificationally supplying outdoor fresh air, the energy efficiency ratio of the fresh air conditioner is increased, the thermal pollution, damp pollution and noise pollution of the fresh air conditioner to environments are reduced, the indoor air quality is improved, and meanwhile, the fresh air conditioner provides the manufacture, installation and using convenience for a local region all-air central air conditioner. The fresh air conditioner provided by the invention and a design and manufacture method of the fresh air conditioner are applicable throughout the year in various regions, particularly in the damp and hot regions; and the fresh air system provides controlled, comfortable and healthy air environments for indoor activity space of people and air conditioner environments for technology for processing, storage and the like.

The invention discloses a heat recovery type multi-connection air condition unit, comprising at least one outdoor unit, a plurality of indoor units and at least one hot and cold converter. The outdoor unit comprises a compressor, an outdoor heat exchanger, a subcooler, two four-way reversing valves and three refrigerant pipelines; each indoor unit comprises an indoor heat exchanger; and the hot and cold converter comprises expansion valves and a bypass capillary, wherein the expansion valves control the on-off of a high pressure air pipe and a low pressure air pipe, and the bypass capillary is arranged between the high pressure air pipe and the low pressure air pipe. When the indoor unit connected with the hot and cold converter is used for heating, the expansion valve at the high pressure air pipe side is turned on and the expansion valve at the low pressure air pipe side is turned off to realize the connection of the air pipe of the indoor unit and the high pressure air pipe. When the indoor unit connected with the hot and cold converter is used for cooling, the expansion valve at the low pressure air pipe side is turned on and the expansion valve of the high pressure air pipe is turned off to realize the connection of the air pipe of the indoor unit and the low pressure air pipe. By the air condition unit, the combination of the units as well as the function of two-pipe heat pump air condition can be realized, and the common two-pipe heat pump air conditioner and the heat recovery type air conditioner capable of cooling and heating simultaneously are effectively combined.

An air conditioning system for conditioning the space within an enclosure having at least one inlet and one outlet, the system comprising first and second liquid / air heat exchangers; the first heat exchanger having an opening for receiving fresh air from the environment and for propelling the fresh air through the first heat exchanger to exchange heat with the liquid before it is entered into the enclosure, and the second heat exchanger having an opening for receiving air from the enclosure and for propelling it through the second heat exchanger to exchange heat with the liquid before it is expelled into the atmosphere. There are also provided methods for air-conditioning an enclosed space and for evaporation of industrial wastes.

A heat exchanger usable with a ventilator, the heat exchanger having an improved structure so that air passing through the heat exchanger may be prevented from leaking. The heat exchanger of the general inventive concept includes a heat-exchanging element having a plurality of liners stacked in a uniformly spaced state and a plurality of spacers disposed between the liners to define air passages, and corner guides respectively coupled to corners of the heat-exchanging element. Each of the corner guides includes a guide channel forming a space to receive the corner of the heat-exchanging element so that the corner guides securely come into close contact with the heat-exchanging element, and to minimize a loosening of the corner guide due to an adhesive applied between the heat-exchanging element and the corner guide.