A processing method of an E-type bushing, comprising: step 1, manufacturing a rough embryo, the rough embryo has a special-shaped plate, a positioning cylinder, a connecting cylinder and a positioning block in sequence from top to bottom, and a center hole is provided in the middle of the special-shaped plate; step 2, Cut the upper surface of the special-shaped plate to form a glue port; step 3, carry out nickel plating; step 4, fix the positioning block, and perform rough machining on the outer diameter of the positioning cylinder; step 5, use the outer diameter of the positioning cylinder As a benchmark, rough turning the inner diameter of the center hole of the special-shaped plate; step 6, cut off the connecting cylinder and positioning block of the semi-finished product, and leave the special-shaped plate and positioning cylinder; step 7, perform finishing on the outer diameter of the positioning cylinder; step 8. Finish turning the inner diameter of the cavity and the positioning channel to form the final product. Through the above processing method, the concentricity of the cavity, the positioning channel and the upper mold core is ensured, and the eccentricity of the plastic lens is avoided.