762results about "Fault recovery arrangements" patented technology

A wavelength division multiplexed optical network has a restoration process to re-route one or more of the wavelengths, by dynamically determining possible restoration routes, and re-routing each wavelength along a chosen one of the possible restoration routes. A distributed dynamic search for restoration routes down to the optical layer, for wavelengths, gives faster and more scalable restoration than reconfiguring routing tables and enables much better utilisation of bandwidth than using predetermined restoration paths.

The Fibre. Channel standard was created by the American National Standard for Information Systems (ANSI) X3T11 task group to define a serial I/O channel for interconnecting a number of heterogeneous peripheral devices to computer systems as well as interconnecting the computer systems themselves through optical fiber and copper media at gigabit speeds (i.e., one billion bits per second). Multiple protocols such as SCSI (Small Computer Serial Interface), IP (Internet Protocol), HIPPI, ATM (Asynchronous Transfer Mode) among others can concurrently utilize the same media when mapped over Fibre Channel. A Fibre Channel Fabric is an entity which transmits Fibre Channel frames between connected Node Ports. The Fibre Channel fabric routes the frames based on the destination address as well as other information embedded in the Fibre Channel frame header. Node Ports are attached to the Fibre Channel Fabric through links.

To identify a fault location easily if there is any fault detected in a network. If an optical path is switched from a working system to an auxiliary system due to a fault, an optical test signal originated from a network node apparatus located at an end point of the optical path is looped back by another network node apparatus on the optical path for the working system. This looped back optical signal is received by the network node apparatus of an originator, in which the signal quality of the optical test signal is measured by a determination device, thereby detecting the presence or absence of the fault on the path through which the optical test signal has been passed. A test receiver within the determination device measures a BER, an S/N ratio, an optical power, or an optical wavelength, whereby it is possible to detect not only the fault location due to disconnection of a link but also degradation in the signal quality.

A repeater station 10 detects whether or not an abnormality exists in each of signal light and monitor light having arrived from a terminal station 1 or a repeater station 20, and controls, according to the result of detection, operations of optical amplifiers 11 and 12 and the monitor light. In the case where both of the signal light and monitor light arriving from the terminal station 1 via the optical transmission line for the downstream direction are abnormal, the optical amplifier 11 for the downstream direction stops its amplifying operation by itself, whereas a monitor control apparatus 13 stops the amplifying operation of the other optical amplifier for the upstream direction and also stops transmitting the monitor light to the terminal station 1 in the upstream direction.

In an optical LAN system, an optical connector is provided between the input and output optical fiber cables and each of the node devices. The optical connector includes a movable body (a switch body) having a prism. The movable body is switched selectively between a first position (a first state) at which the input and output optical fiber cables are optically connected to the node device and a second position (a second state) in which the input optical fiber cable and the output optical fiber cable are optically connected to each other in such a manner as to bypass the node device. This arrangement suppresses a network crash by means of a relatively simple configuration.

A communication recovering system for a wavelength division multiplexed passive optical network (WDM PON). The communication recovering system can recover fault of optical fibers between the central office and the remote nodes without additional optical fibers by grouping two remote nodes and employing an AWG having periodic transmission characteristics, and can also simply and rapidly recover such a fault with minimal optical loss using an AWG of 2×N structure and an On-Off optical switch, although protection optical fibers are additionally installed therein. The system can rapidly recover fault of optical fibers between a local office and optical network units, 1:N manner, using 2×2 optical switches, which are installed to each of the optical network units, a reserved transmitter and receiver, and a transceiver. The communication recovering system has advantages in that it can simplify network structure, be cost-effectively implemented, reduce optical loss, and rapidly perform protection of optical fiber fault.

This invention provides another optical path fault recovery method by which when the resources of a standby path are used by extra traffic, the standby path can be set quickly and an active path can be switched to the standby path without any improper connection in the event of a fault on the active path. An end point node of a path having received fault notification issues a resource securing request message transferred hop by hop to a start point node along the standby path. In the case where resources of the standby path are secured, when the resources are used by the extra traffic, the nodes on the standby path and the start point node that have received the message release the extra traffic and then secure the resources. When the resource securing request message reaches the start point node, the start point node issues a switch changeover request message, and the end point node, the start point node, and the nodes on the standby path set switches according to the secured resources.

A transmission unit of a signal transmission device includes: a transmission-side detection unit that detects image information from an inputted electrical signal; a receiving unit that receives, from a reception unit, a status signal representing an arrival status of an outputted optical signal; and a control unit that controls an electrical-optical conversion unit on the basis of the detection result of the transmission-side detection unit and the status signal of the receiving unit so that the output of the optical signal is shut down in at least one of a case where image information is not included in an electrical signal and a case where an optical signal has not arrived.

Disclosed is a wavelength-division multiplexing-passive optical network having a central office including a plurality of first working and protection transmit/receive modules, working and protection optical transmitters, and a plurality of first optical switches, the first working and protection transmit/receive modules generating downstream optical signals and detecting upstream optical signals having corresponding wavelengths, the working and protection optical transmitters generating broadcasting optical signals, the first optical switches performing a switching operation when faults occur, a plurality of subscriber units for receiving broadcasting optical signals and downstream optical signals having corresponding wavelengths and generating upstream optical signals, the subscriber units including second optical switches, a remote node including working and protection optical splitters for dividing intensity of the broadcasting optical signals, the remote node being positioned between the subscriber units and the central office, working and protection main optical fibers for linking the central office with the remote node; and a plurality of working and protection branch optical fibers for linking the remote node with the subscriber units, respectively.

An optical transmission system that offers more efficient bandwidth usage in normal operation, as well as enhanced fault tolerance for higher service availability. A transponder converts high-priority and low-priority client signals into high-priority and low-priority wavelength signals to be added to network traffic. An optical switch fabric normally delivers high-priority and low-priority wavelength signals to high-priority and low-priority paths, respectively, where the two paths run in opposite directions. Such signals and paths are prioritized in terms of survivability against network failure. In case of a network failure, the optical switch fabric performs protection switching in either duplicate switching mode or path switchover mode depending on network failure information and drop wavelengths of each optical transmission device. In duplicate switching mode, high-priority wavelength signals are directed to both the high-priority and low-priority paths. In path switchover mode, they are routed to the low-priority path, instead of the high-priority path.

The present invention relates to protection and restoration method for MPXS in optical mesh networks, particularly to protection and restoration method which can find and restore fast failures by configuring routing table with working label and protection label when failures occur at links or nodes. According to the present invention, by configuring a routing table consisted of working label and protection label and by setting an optical path as working path and protection path, data is transferred through the working path, and when a failure occurs in a optical path, data is transferred through a protection path by using a preliminarily configured protection label and by switching to. According to the present invention, by configuring routing table with working label and protection label, failures can be restored fast when failures occur at links or nodes, and whole network resources can be applicable.

The invention discloses a fault detection method and system for a multi-branch PON (Passive Optical Network), comprising a network fault detection device, a WDM (Wavelength Division Multiplexer) and a light splitting device. The network fault detection device is arranged at one OLT (Optical Line Terminal) side and used for emitting detection light and transmitting the detection light to the WDM; a detection light echo signal, the wavelength of which is the central detection wavelength of branch filters of an ONU (Optical Network Unit) to be detected, is received for fault analysis; the WDM is arranged at the OLT side and used for coupling the detection light into the multi-branch PON and transmitting the detection light to the light splitting device through a trunk fiber; the light splitting device comprises a light splitter and a plurality of branch filters respectively mounted on all ONU branches, the central detection wavelengths of all branch filters in the same light splitting device are different from one another, and the central detection wavelength of a certain branch filter is the wavelength of the detection light capable of being filtered by the branch filter. The fault detection method and system provided by the invention are simple and low in cost, and effectively realize the fault detection of the multi-branch PON.

An optical transmission apparatus implemented as an OADM (Optical Add/Drop Multiplexer) includes quality monitors each for monitoring the quality of a signal arriving on a particular optical transmission path. A monitor/control unit converts quality signals output from the quality monitors to path-by-path bit error rates, or estimation values, and compares them to select a route. The monitor/control unit then generates a metric value "1" for the route selected and adds it to one of identical metric values, which are assigned to routes to the same destination, that corresponds to the route selected. The monitor/control unit can therefore select a route closer to actual transmission path conditions. A method of determining an optimal route for optical transfer is also disclosed.

In a protection switching method for a passive optical network system, a communication abnormality is detected in at least one active-system virtual path established between an optical line terminal and a subscriber terminal through a transmission path and a network unit. When a communication abnormality is detected in an active-system virtual path, a switch is controlled to switch the transmission paths to establish a standby-system virtual path between the optical line terminal and the subscriber terminal as a communication partner. A protection switching apparatus for a passive optical network system is also disclosed.

Disclosed herein is an apparatus and method for managing faults of a loop-back Wavelength Division Multiplexing Passive Optical Network (WDM-PON). The apparatus includes a control light source as well as a plurality of light sources in a central office, a loop-back means for transmitting control light to the central office through a remote node optical demultiplexer or remote node optical multiplexer in a remote node, a control light receiver for receiving looped-back control light, and a control unit for maintaining power of the upstream signals, which are received by central office receivers, and power of the control light, which is received by the control light receiver, at a maximum.

The present invention provides methods, apparatus and systems for protecting connections between optical cross-connect switches and client equipment. A connection failure is detected, signaled, and a switch made by the client equipment and the optical cross-connect switch to a protection connection between them so as to minimize service interruption. An out-of-band channel or an in-band channel can be used to signal the connection failure.

The present invention enables to prevent transmission characteristics from deteriorating due to the nonlinear effect in the transmission path caused by an increase in the channel power when a cable disconnection occurs. An optical signal level adjustment method comprises the steps of: obtaining, based on one or more optical signal disconnections which are detected per wavelength block and each of which is detected by a signal disconnection detection section included in each of terminal station devices, a location at which the optical signal disconnection has occurred, a combination of a terminal station device and a wavelength block, and a dummy light adjustment amount, said combination being required to be subjected to adjustment of transmission dummy light, said combination and said dummy light adjustment amount corresponding to the location; and transmitting, to the terminal station device which is required to be subjected to adjustment of the transmission dummy light, a control signal for adjusting the intensity of the dummy light in the obtained wavelength block by the dummy light adjustment amount.

The present invention relates to an optical level control method for use in an optical transmission system. In the system, a WDM terminal comprises a multiplexing/demultiplexing unit, an amplifier, an up-direction OSC light transmitting/receiving unit, an up-direction multiplexer, an up-direction branching unit, an amplifier and an APR control unit, and a repeater comprises an up-direction branching unit, an OSC light transmitting/receiving unit, an amplifier, an up-direction multiplexer, a down-direction branching unit, an amplifier, a down-direction multiplexer and an APR control unit. In this configuration, a flexible optical output level control in connection with variation in WDM light level, a selective value irrespective of occurrence of an error stemming from the passage of time and avoidable malfunctions are respectively capable. In addition, a trouble retrieving operator can eliminate the possibility of being exposed to the WDM light.

The invention provides a parameter configuring method, device and system for an ONT (Optical Network Terminal). The method comprises the following steps of: acquiring parameter configuring information which corresponds to the oNT and is used for configuring the ONT by the OLT; and sending the parameter configuring information to the ONT by the OLT so that the ONT configures parameters according to the parameter configuring information. In the parameter configuring method, device and system for the ONT, which are provided by the embodiment of the invention, the parameter configuring information is obtained through the OLT and sent to the ONT to be configured so that the ONT configures parameters according to the parameter configuring information, the ONT is remotely and flexibly configured through the OLT, operation cost is decreased when the ONT is configured, and the production cost for producing the ONT is reduced.

A network unit for exchanging control messages with a remote network unit through a communication path to be established in a network. The network unit enables recovery of failures whether they occur in any of one way links, both-way links. The network unit also enables recovery of node failures to occur in a GMPLS network. The network decides whether or not it is possible to bypass all failure-occurred links detected in the communication path by switching the communication path to another by itself. When it is possible, the network unit detects the switching state of a downward segment that can bypass all those failure-occurred links. If the communication path is already switched or being switched in the downward segment, the network unit cancels the switching. If the communication path is not switched nor being switched in the downward segment, the network unit switches the communication path to a bypass route.

A main line cable and a backup line cable are laid in a land portion in different routes. A land terminal station includes a break detecting unit that detects a break of the main line cable, and a path switching unit that switches a transmission path to the backup line cable. The break detecting unit detects a break of the cables based on a received-light level of a main signal transmitted from an underwater cable, or based on a received-light level of a returned monitor signal that has been output by the break detecting unit and reflected by the beach manhole. The beach manhole includes optical couplers that couple and divide the main signal for the main line cable and the backup line cable, a fiber grating that reflects the monitor signal, and an optical director.

A visible light communication (VLC) device is provided for use in a VLC system. The VLC device detect a trigger condition indicating a failure of a VLC link associated with first allocated resources used to communicate with a second VLC device. In response to the detection, the VLC device terminates on the first allocated resources transmission of data to the second VLC device and transmits a fast link recovery (FLR) signal using the first allocated resources. The VLC device receives a fast link recovery response (FLR RSP) signal indicating the second VLC device received the FLR signal and, in response, the VLC device resumes transmission of data to the second VLC device.

Disclosed is a self-healing passive optical network comprising: a station, such as a central office, for outputting first and second multiplexed downstream optical signals to first and second feeder fibers; a remote node connected to the central office through the first and second feeder fibers to demultiplex each input multiplexed downstream optical signal into a plurality of downstream optical signals and to output the demultiplexed downstream optical signals; and a plurality of optical network units for receiving one or more downstream optical signals, each of the optical network units are connected to the remote node through at least one distribution fiber, wherein the station outputs the first and second multiplexed downstream optical signals to the first and second feeder fibers, respectively, and outputs the first and second multiplexed downstream optical signals to one of the first and second feeder fibers when a defect occurs in a fiber.

In a passive optical network system, a parent station includes a reception circuit that receives an optical signal from each of child stations using a threshold used to identify if the optical signal is 0 or 1; a bandwidth setting unit that determines a time at which each child station sends an optical signal; a storage unit that stores thresholds and intensities of optical signals received from the child stations; and a control unit that sets a threshold, stored corresponding to a sending time, in,the reception circuit to control a reception of an optical signal. The control unit has a function that compares an intensity of a signal received from each child station at an optical signal reception time with information stored in the storage unit to detect and determine a fault in the child station or in the optical fiber connected to the child station.

The present disclosure is a novel utility of a software defined radio (SDR) based Distributed Antenna System (DAS) that is field reconfigurable and support multi-modulation schemes (modulation-independent), multi-carriers, multi-frequency bands and multi-channels. More specifically, the present invention relates to a DAS utilizing one or more Daisy-Chained Rings of Remote Units. The present invention enables a high degree of flexibility to manage, control, enhance, facilitate the usage and performance of a distributed wireless network such as Flexible Simulcast, automatic traffic load-balancing, network and radio resource optimization, network calibration, autonomous/assisted commissioning, carrier pooling, automatic frequency selection, frequency carrier placement, traffic monitoring, traffic tagging, pilot beacon, etc. As a result, a DAS in accordance with the present invention can increase the efficiency and traffic capacity of the operators' wireless network.