322results about "Altering/correcting law of variation" patented technology

A multidrop network of multichannel, addressable sensing modules (ASM's), to be embedded within a composite structure, remotely powered, and interrogated by a personal computer through a non-contacting inductive link. Each ASM contains a microprocessor with non-volatile memory, multiplexer, programmable gain and filter instrumentation amplifier, and sigma delta analog to digital converter (all housed in two thin surface mount packages). An embedded mothernode includes circuitry for power and data reception (into the structure), and data transmission (back out of the structure). The external interrogation system communicates into the network of ASM's by modulating the AC waveform that delivers power to the embedded electronics. Once addressed, each ASM powers up its programmable (gain & filter) sensing channels (3 full differential or 5 pseudo differential) and data conversion elements. Sensed data are pulse code modulated, including error checking, which serially modulate an RF carrier for wireless transmission out of the composite to the interrogating computer. These advanced, micro-miniature sensing networks may be applied to a wide variety of military, medical, & civil structures.

Reactive sensors typically exhibit nonlinear response to the combination of an excitational signal (e.g., sinusoidally oscillating signal) and a physical parameter under measure (e.g., position of magnetic core member). Such sensors are typically sensitive to temperature variation. Systems and methods are disclosed for compensating for the nonlinear and / or temperature dependant behavior of reactive sensors and for calibrating the post-compensation output signals relative to known samples of the physical parameter under measure (e.g., position). One class of embodiments comprises a housing containing at least part of a reactive sensor, a monolithic integrated circuit and a timing reference (e.g., an oscillator crystal). The integrated circuit includes a waveform generator for generating a sensor exciting signal, a detector for detecting the response of the sensor to the combination of the exciting signal and the under-measure physical parameter, a temperature compensating unit and a Pade' Approximant based, nonlinearity compensating unit. The temperature compensating unit and the Pade' Approximant nonlinearity compensating unit are tuned by use of digitally programmed coefficients. The coefficients calibrate the final output as well as compensating for nonlinearity and temperature sensitivity. A highly accurate measurement of the under-measure physical parameter is made possible even though each of the sensor and compensating circuitry may be relatively simple, compact, and low in cost.

An analyte detection system is provided with calibration information uniquely specific to the set of test strips to which the sample is to be applied. The calibration information may be stored in permanent memory of the testing device, such that the device is discarded after use of all the test strips in a kit, or it may be stored in a calibration chip accompanying the set of test strips and distributed therewith, thereby enabling re-use of the testing device with a different set of test strips and associated calibration chip.

Systems and methods for applying time-dependent algorithmic compensation functions to data output from a continuous analyte sensor. Some embodiments determine a time since sensor implantation and / or whether a newly initialized sensor has been used previously.

A position-measuring device for fluidic cylinder-and-piston arrangements having at least one Hall sensor, preferably arranged in the area of the cylinder wall, especially in a cylinder wall, and a magnetic region, arranged in the piston. At least one Hall sensor array has at least two Hall sensors spaced one from the other in the direction of movement of the piston. One coil is provided whose magnetic field permits the switching points of the Hall sensors to be adjusted in response to the coil current.

A transducer package 20 includes a substrate 32 having a first axis of symmetry 36 and a second axis of symmetry 38 arranged orthogonal to the first axis of symmetry 36. At least a first sensor 50 and a second sensor 52 each of which are symmetrically arranged on the substrate 32 relative to one of the first and second axes of symmetry 36 and 38.The first and second sensors 50 and 52 are adapted to detect movement parallel to the other of the first and second axes of symmetry 36 and 38. The first sensor 50 is adapted to detect movement over a first sensing range and the second sensor 52 is adapted to detect movement over a second sensing range, the second sensing range differing from the first sensing range.

Reactive sensors typically exhibit nonlinear response to temperature variation. Systems and methods are disclosed for compensating for the nonlinear and / or temperature dependent behavior of reactive sensors and for calibrating the post-compensation output signals relative to known samples of the physical parameter under measure. One call of embodiments includes a housing containing at least part of a reactive sensor, a monolithic integrated circuit and a timing reference. The integrated circuit includes a waveform generator for generating a sensor exciting signal, a detector for detecting the response of the sensor to the combination of the exciting signal and the under-measure physical parameter, a temperature compensating unit and the Pade Approximant nonlinearity compensating unit are tuned by use of digitally programmed coefficients. The coefficients calibrate the final output as well as compensating for nonlinearity and temperature sensitivity.

An encoder comprises position detecting device for detecting a magnetic pole position and a rotational position of a motor. The encoder also includes a memory portion for storing parameter information particular to the motor or the position detecting device. A transmitting portion of the encoder is provided for externally transmitting parameter information particular to the position detecting device as a differential signal. A transmission suspension request detecting device is provided for detecting that the differential signal is driven by a given signal externally provided such that the differential signal does not exist as a transmission signal and for generating a transmission suspension request signal requesting suspension of transmission of the differential signal. Finally, a switching control device is provided for switching the transmitting portion to a transmission suspending condition based on the transmission suspension request signal provided by the transmission suspension request detecting device.

An apparatus and method for determining the angular position of a rotor. The rotor is a part of a resolver used to determine the position of a shaft, or the like, in operation in a system such as a shaft in a missile gimbal. A digital signal processor is used advantageously to reduce cost. The inherently poorer performance of a data sampling approach in the presence of noise, as compared to the prior art tracking converter approach, is overcome by novel application of the digital signal processor and related circuitry.

A rotation detecting device for detecting a rotating object includes a housing having a bearing and an mounting surface, a rotor member having magnetic peripheral portion and a rotary shaft that is supported by the bearing, a biasing permanent magnet for providing magnetic field around the mounting surface and the magnetic peripheral portion, an IC sensor chip including plural magnetic sensor elements disposed on the mounting surface to provide a sensing signal related to change in magnetic field around the sensor elements, and an IC signal processing chip that provides a rotation signal according to the sensing signal. In this device, the bearing and the mounting surface are integrally formed into the housing at a prescribed distance to secure an unchanged air gap distance.

Methods and systems using Pade′ Approximant expansion ratios provide mappings between nonlinear sensors and a more linearized output domain. In one embodiment (a) a variable gain amplifier receives a supplied input signal, the amplifier has at least a first input terminal, an output terminal, and a gain control terminal; (b) a first summer coupled to the output terminal of the variable gain amplifier adds in a first offset signal; (c) a first multiplier coupled to an output of the first summer receives a proportional feedback factor signal and correspondingly generates a multiplied feedback; (d) a second summer coupled to an output terminal of the first multiplier adds in a corresponding second offset signal; and (e) a second multiplier coupled to an output of the second summer receives a gain factor signal and generates a multiplied gain signal; where the gain control terminal of the variable gain amplifier is operatively coupled to an output terminal of the second multiplier.

A sensor assembly. The sensor assembly includes a transducer, a memory element to store a plurality of transducer signatures, and a processor to identify the transducer using the transducer signatures, to process the environmental characteristic using the identified transducer signatures and the adaptive algorithm, and to output the processed environmental characteristics.

Disclosed is a methodology for reducing data processing time for data retrieved from a condition responsive sensor. During sensor manufacture, the manufacturer determines and stores calibration data for individual sensors in a database that associates sensor identification data and calibration data. The calibration data is later associated with a sensor data reading device that retrieves the calibration data based on reading the sensor device identification data and employs the retrieved calibration data to compensate raw condition responsive data read from the sensor device.

A circuit and a method to measure continuously the resistance of variable resistors in series as e.g. potentiometers within a sensor, used for e.g. a joystick, has been achieved. The voltage across said sensor comprising any number of variable resistors is stabilized. A constant current source is providing a minimum current through said sensor. A variable current source is used to zoom variations of current through the sensor caused by variations of resistance of the sensor. Said variable current is mirrored and by measuring the voltage across a shunt resistor the total resistance of the sensor is identified. Using ports between each of the resistors, voltages can be measured representing the resistance of each of the variable resistors using known equations of voltage dividers. Any number of variable resistors can be used in the circuit invented.

A system and method for automatic identification of a detachable component of an instrument is disclosed. The detachable component includes a machine-readable device that contains information associated with the detachable component. The machine-readable device can be a bar code, a variable depth pattern, a magnetic stripe, or the like. The information contained within the machine-readable device can include one or more of serial number, type, material, dimensions, and calibration data of the detachable component. The instrument includes a reader that is configured to obtain the information from the machine-readable device.

A transducer package 20 includes a substrate 32 having a first axis of symmetry 36 and a second axis of symmetry 38 arranged orthogonal to the first axis of symmetry 36. At least a first sensor 50 and a second sensor 52 each of which are symmetrically arranged on the substrate 32 relative to one of the first and second axes of symmetry 36 and 38. The first and second sensors 50 and 52 are adapted to detect movement parallel to the other of the first and second axes of symmetry 36 and 38. The first sensor 50 is adapted to detect movement over a first sensing range and the second sensor52 is adapted to detect movement over a second sensing range, the second sensing range differing from the first sensing range.

An electronic gas sensor signal conditioner which can automatically adapt to a wide variety of commercial off-the-shelf sensors and provide a digital output in a standard, easily used format. The signal conditioner has analog and digital sections. The analog section includes a sensor excitation sub-section and a signal amplification sub-section. The digital section comprises a microcontroller and controls the analog section. The digital section also converts the signal from the analog section into digital form, reads the sensor TEDS (Transducer Electronic Data Sheet), applies calibration constants and converts the signal into a standard, easily readable digital format.

A boat indicator enables a user to easily read engine speeds for boats which can switch between a low-speed trolling mode and a normal running mode at speeds higher than the trolling mode speed. The boat indicator includes an engine speed indicating section for indicating engine speed. The engine speed indicating section is adapted to switch between a normal mode display for indicating the engine speed over a relatively large range when the boat is in the normal mode and a trolling mode display for indicating engine speed over a relatively small, low-speed range when the boat is in the trolling mode. The normal mode display indicates engine speed detected with a first resolution over the large range. The trolling mode display indicates engine speed detected with a second resolution finer than the first resolution over the smaller range.

A position detection system and method for linear and rotary sensing applications are disclosed herein, including a plurality of magnetoresistive sensing components for linear and rotary detection sensing, and an integrated circuit for amplifying and calibrating signals generated by the magnetoresistive sensing components in order to provide a full digital calibration and a ratio-metric output voltage or digital output signal indicative of linear and rotary position data.

A slope correction signal setting unit is configured to output selectively one of a plurality of direct current signals according to the sensed temperature parameter signal. Levels of the plurality of direct current signals are determined to correspond to the predetermined temperature dependent characteristic of the sensor signal. An analog amplifying circuit is connected to the slope correction signal setting unit and configured to amplify the outputted direct current signal according to the sensed temperature parameter signal. An analog arithmetic circuit is connected to the analog amplifying circuit and configured to carry out a predetermined arithmetic operation based on the amplified direct current signal and the sensor signal.

A tire pressure monitoring system (12) for a vehicle (10) has a pressure sensor circuit (16A) that includes an ECU (95), a transmitter / receiver (90), and pressure sensor (94). A method of operating a tire pressure monitoring system includes calibrating a tire pressure sensor circuit in a first range and a second range and generating a first calibration data for the first range and second calibration data for the second range. The first calibration data and the second calibration data are stored in a memory of the tire pressure sensing circuit (16A). A data signal corresponding to the pressure is generated. The first or second calibration data is generated in response to the range of the data signal to form a selected calibration. The data signal is calibrated with the selected calibration to form a pressure indicative signal. The pressure indicative signal is transmitted to a receiver (28) within the vehicle (10) with a range status corresponding to the selected calibration. A pressure signal is formed in response to the pressure indicative signal and the range status and the tire pressure monitoring system is operated with the pressure signal.

A measuring device (10) comprising a current sensor (20) and a measuring unit (40) connected to each other by a connection cable (50). The connection cable (50) comprises three pairs of conductors of which a first measurement pair (51) is arranged to transmit a signal representative of the current measured by the sensor (20), a second power supply pair (52) is arranged to power electrically the sensor (20) and the measuring unit (40), and a third communication pair (53) is arranged to transmit at least one complementary signal between the sensor (20) and the measuring unit (40), such as an identification feature of the sensor allows the measuring unit to recognize automatically the sensor and provide an exploitable correlated value of the current measured by the sensor (20).

An apparatus for detecting movement has a signal module for processing a movement signal produced by an inertial sensor, and a configuration module operatively coupled with the signal module. The configuration module configures the signal module to process the movement signal in accord with at least one specified parameter.

A computer-implemented dynamic data filtering system and method for selectively choosing operating data of a monitored asset that modifies or expands a learned scope of an empirical model of normal operation of the monitored asset while simultaneously rejecting operating data of the monitored asset that is indicative of excessive degradation or impending failure of the monitored asset, and utilizing the selectively chosen data for adaptively recalibrating the empirical model to more accurately monitor asset aging changes or operating condition changes of the monitored asset.

A measurement instrument having a processor, a first sensor and a second sensor. The processor is adapted to output a measurement signal embodying a measurement of a physical quantity. The first sensor and second sensor are connected to the processor and are operable to generate respectively first and second measurements of the physical quantity. The processor defines a first measurement range within which the measurement signal is dependent on the first measurement and not the second measurement. The processor defines a second measurement range within which the measurement signal is dependent on the second measurement and not the first measurement. The first and second ranges meet at a predetermined transition. The first and second measurements are different at the transition and the measurement embodied in the measurement signal crosses the transition without an abrupt change.

Methods are provided for the detection of an analyte in a sample using wavelength modulated differential photothermal radiometry with enhanced sensitivity. A wavelength modulated differential photothermal radiometry system, comprising two optical modulated beams, where each beam experiences different absorption by the analyte, is calibrated by controlling the relative phase difference between the modulated beams so that individual photothermal signals corresponding to each modulated beam are 180° out of phase, corresponding to peak sensitivity to analyte concentration. The system may be further calibrated by varying the relative intensities of the two modulated beams and measuring standards containing known analyte concentration in order to determine an optimal relative intensity for a given concentration range of interest.