8results about How to "Avoid scalding" patented technology

This utility model discloses a composite mold for mobile phones, belonging to the field of composite molds. It includes a base plate, a support frame on the upper surface of the base plate, and a lower mold base fixedly connected to the center of the upper surface of the base plate. Cylinders are installed on both sides of the top of the support frame, and the telescopic ends of the two cylinders are connected to the upper mold base. A cavity is opened inside the lower mold base. A pushing assembly includes a connecting frame installed on the front of the lower mold base, and a dual-axis motor connected to the side of the connecting frame. Drive rods are connected to both sides of the dual-axis motor. Through the pushing assembly, when the formed mobile phone case is ejected from the pressure groove, the dual-axis motor drives the drive rods on both sides to rotate. Then, the drive rods drive gears to rotate. When the gears rotate, they drive the pushing frame to move horizontally in a straight line. As the pushing frame moves horizontally in a straight line, it pushes the ejected mobile phone case away from the mold's range, thus automatically collecting the product and avoiding burns from touching the mold during manual collection.

This utility model discloses a pleat removal device for polyester fabric, comprising: a starting roller placed on one side of the upper surface of an operating table; a take-up roller placed on the other side of the upper surface of the operating table; four supports one respectively placed on both ends of the starting roller and both ends of the take-up roller, the lower end face of the supports one being fixedly connected to the upper surface of the operating table, and the upper end of the supports one being rotatably connected to both ends of the starting roller and both ends of the take-up roller; a rotating motor shaft fixedly connected to one end of the take-up roller, and the take-up roller being rotatably connected to the supports one via the rotating motor; a groove placed on the upper surface of the operating table and positioned between the starting roller and the take-up roller; an ironing board placed in the groove and lower than the starting roller and the take-up roller, the ironing board's orientation being consistent with the starting roller's orientation, and the lower end face of the ironing board being arc-shaped; one end of a power cord connected to the ironing board; and two supports two respectively fixedly connected to both ends of the ironing board. The beneficial effect of this utility model is to improve efficiency.

The application relates to the table tennis manufacturing technical field, in particular to a process for metal-mold casting a table tennis bat by using a magnesium-lithium alloy material, a forming cavity is arranged in the inside of a mold, a pouring hole is communicated with one side of the forming cavity, a filling assembly is arranged in the inside of the forming cavity, a guide assembly is connected with one side of the filling assembly, a smooth moving assembly is connected with one side of the guide assembly, a water tank, a first water pump and a second water pump are fixedly connected with the outside of the mold, a heat exchanger is fixedly connected with the outside of the water tank, an input pipe is communicated with the input end of the heat exchanger, a third water pump is communicated with the other end of the input pipe, the other end of the third water pump is communicated with the water tank, and an output pipe is communicated with the output end of the heat exchanger; the magnesium-lithium alloy material is poured into the forming cavity in the inside of the mold, the table tennis bat is not limited by the material state, only needs to be directly poured after being melted, the production is very convenient, the integral setting is better in overall stability, the table tennis weight is more suitable for athletes and is not easy to be damaged.

The utility model discloses a kind of double-membrane compatible longitudinal sealing mechanism, including mounting plate, guiding plate is sequentially provided on the mounting plate from top to bottom, film pulling device, heating device and compression device;Thin film is guided through guiding plate, driving assembly drives paper pulling wheel, and cooperate with driven wheel to pull packaging film, heating device is heated to suitable sealing temperature to thin film, then the sealing is completed by compression of driving, driven longitudinal sealing wheel, speed regulating device is applied to belt and changes the running speed of compression device, adapts different membrane material.In addition, the opening and closing of driving swing block and passive swing block are controlled by electromagnet, can effectively prevent thin film from being scalded, driving longitudinal sealing wheel and driven longitudinal sealing wheel built-in heating copper block, improve sealing efficiency.The utility model heating speed is fast, with anti-scalding membrane opening and closing structure and anti-wrinkle speed regulation function, strong flexibility, and the compatibility of different membrane material is good.

This utility model discloses a hollow anti-scalding instant noodle bowl, comprising an inner layer, an outer layer, a bottom layer, a first pleated insulating layer, and a second pleated insulating layer. The upper part of the outer layer wraps around the outer wall of the inner layer, and the lower part is hollowly isolated from the inner layer. The bottom layer is located at the bottom of the inner layer. The first pleated insulating layer is arranged in a circular array relative to the hollow insulating layer between the outer and inner layers. The second pleated insulating layer is arranged in a linear array at the bottom of the bottom layer. In this utility model, the first pleated insulating layer is fixed by an adhesive method. The corrugated structure ensures stable strength while minimizing the thermal bridging effect. The still air inside the first and second heat-insulating cavities can effectively insulate heat, preventing burns when holding the bowl. The second pleated insulating layer insulates the bottom, preventing burns to the table or fingers.

A water bath heating device of a colostrum pasteurization machine comprises a water tank, a rotating frame arranged in the water tank, a colostrum placing basket installed on the rotating frame, U-shaped heating elements arranged on the two sides of the interior of the water tank, a protective net frame wrapping the U-shaped heating elements, a rail groove formed in the protective net frame and a sliding block installed in the rail groove in a sliding mode. The inner wall of the water tank is provided with a boss, the boss is slidably provided with a sliding rod, the sliding rod is connected with the sliding block through a connecting rod, the surface of the sliding rod is sleeved with a spring, the top of the sliding rod is provided with a limiting head, the bottom of the sliding rod is connected with an extrusion connecting plate, and the rotating frame is provided with an extrusion rod; according to the device, the colostrum bag is prevented from making contact with the high-temperature heating element through the protection net frame, the water flow exchange efficiency inside and outside a protection area is improved by stirring a water body through the stirring plate, automatic circulation action of the stirring device is achieved through a sliding rod automatic reset structure, and therefore the water temperature uniformity is effectively improved, and the sterilization safety is improved.

The application relates to the trademark processing technology field, in particular to a glue spraying positioning trademark processing technology, which comprises the following steps: S1, removing waste from trademarks containing multiple three-dimensional textures, and positioning the trademarks with the three-dimensional textures on positioning paper; S2, sleeving a positioning template provided with through holes matched with the three-dimensional textures on the trademarks; wherein the thickness of the positioning template is smaller than the height of the three-dimensional textures; S3, spraying glue on the top of the trademarks, and forming a texture positioning film after the glue is solidified, positioning grooves are formed on the texture positioning film to position the three-dimensional textures; S4, respectively removing the positioning paper and the positioning template to obtain trademark products positioned by the texture positioning film; and S5, cutting the trademark products containing multiple independent trademark marks to cut into trademark individual products containing single independent trademark marks. The application realizes accurate positioning of trademarks, and improves the overall processing quality and production efficiency of the trademarks.