We propose to shape the leaf by the use of electro-chemical machining (ECM). ECM is a technique by which a blank is suspended within a mould, with a small gap therebetween. A conductive fluid is caused to flow through the gap, and a large electrical current is passed from the mould to the blank. The blank steadily erodes, dissolving into the fluid. The fluid should not provoke a reaction from the material of the blank, such as a surface oxide. Sodium Chloride solution is a common choice. The current that is passed can, if desired, be controlled to a profile that will affect the manner of erosion. Thus, the current profile can be a steady on/off current, or it can be pulsed. One known arrangement is for the current to rise to a peak, then fall to zero, followed by a brief reverse flow.